with BDI2000 flash programming
hi, im new to this email list.. but i am having some problems with my board
and don't know where to turn.
target board: ep8260
host distribution: redhat 8.0 (with powerpc cross compilers)
debugger: BDI2000
problem: trying to burn a PPCBOOT image into the flash
thanks.
i figured out my problem.. it was in the cfg file..
i didn't have the [HOST] configured properly to
access the ppcboot.bin file.. only the ppcboot.srec file.
simple answer to a simple problem.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
hi, im new to this email list.. but i am having some problems with my board
and don't know where to turn.
target board: ep8260
host distribution: redhat 8.0 (with powerpc cross compilers)
debugger: BDI2000
problem: trying to burn a PPCBOOT image into the flash memory at location
0xFF10
set
Hi Jason,
You are correct that your BDI2000 downloads the config file
successfully. Otherwise, it should print a message like
*** CONFIG: cannot open ep8260.cfg.init
all the time once you telnet to BDI.
I'd suggest you check permissions on /tftpboot/ppcboot.bin
It should be readable
