I'm very new to System Ace, and this is probably a stupid question.
We were able, with the Monta Vista Linux to get a system.ace with a
zImage.elf linux file to boot on an ml403 board. The system ace chip seemed
to copy the zImage.elf into DDR ram, and the system booted. No block ram
used.
High Wade,
Does systemace comes out with a bus error? (Red led on ML403 board)?
If yes may be its because the memory map of your design did not fit with
ML403 ones and that SystemaAce try to load kernel image in a non ram
place.
you may have to specify the code start address to the genace.tcl sc
Hi Alayrac,
Thank you for your reply.
No, there is no bus error.
The memory map of our design matches the ML403 as regards the DDR ram. We
are just trying to get the code into external DDR Ram.
The code start address is specified in the elf file, and lists correctly
on the screen as the g
ade Maxfield" <[EMAIL PROTECTED]>*
Sent by: [EMAIL PROTECTED]
05/01/2007 17.23
To
[EMAIL PROTECTED] cc
ppc Subject
Re: System Ace booting (or not) question
Hi Alayrac,
Thank you for your reply.
No, there is no bus error.
The memory map of our design matches the ML403 as r
linux-ppc linux-ppc/eurotel
Sent by: Massimiliano Patriarca
23/01/2007 10.42
To
"Wade Maxfield" <[EMAIL PROTECTED]>
cc
Subject
Re: System Ace booting (or not) question
Hi Wade,
we made our board from scratch, there are two FPGA, one FX12 and one SX35,
loaded with syste