hi,
step_threshold default config is 0.0. Hence it was not doing time-sync when
moving from s0 to s2 via s1. After changing value of step_threshold, time-sync
is happening.
Question: Any reason as to why step_threshold is set 0.0? What should be the
proper value?
Also first_step_threshold valu
hi,
phc2sys has 3 phases
1) unlock (s0, SERVO_UNLOCKED
2) time-sync (s1, SERVO_JUMP)
3) freq-sync (s2, SERVO_LOCKED)
Based on the log capture below:
Nov 10 03:49:05 phc2sys: [21956.824] CLOCK_REALTIME phc offset 8 s2
freq +9775 delay 2252
Nov 4 12:50:40 ptp4l: [21957.406] rms 3
On Mon, Nov 22, 2021 at 10:13:30AM +, Mikael Arvids wrote:
> Could you explain what I would use the TIME_STATUS_NP.ingress_time for when
> monitoring the end station?
For example:
- If ingress time does not increase: lost frames or lost GM
- If delta(ingress time) unreasonable: broken GM o
Hi Richard,
Thanks for the quick reply!
Could you explain what I would use the TIME_STATUS_NP.ingress_time for when
monitoring the end station?
Best regards,
Mikael
-Original Message-
From: Richard Cochran
Sent: den 18 november 2021 23:23
To: Mikael Arvids
Cc: linuxptp-users@lists.so
