Could someone give me an answer to this question?
Thank you
2022년 8월 16일 (화) 오후 1:24, james jeong 님이 작성:
>
> Dear,
>
> In the path you mentioned, the service files of ph2sys and ptp4l were
> modified and run according to my environment.
>
> ---ptp4l.service---(Master)
> [Unit]
>
On Tue, Aug 30, 2022 at 03:28:51PM +0200, Ray Vanbeek wrote:
> Ah, that explains it. Thanks, Miroslav!
>
> And what about an ever decreasing master offset value at -max freq?
> I assume the master offset value is in nanosecs? It seems that in 120
> seconds, the master offset value decreases with
On Tue, August 30, 2022 7:13 am,
linuxptp-users-requ...@lists.sourceforge.net wrote:
> Date: Tue, 30 Aug 2022 16:21:36 +0530
> From: Hari Kumar
> Subject: [Linuxptp-users] ts2phc error (ts2phc[20737.341]:
> PTP_EXTTS_REQUEST failed: Invalid argument
> Message-ID:
>
...
> [eth0]
>
Ah, that explains it. Thanks, Miroslav!
And what about an ever decreasing master offset value at -max freq?
I assume the master offset value is in nanosecs? It seems that in 120
seconds, the master offset value decreases with appr 90 secs
On Tue, Aug 30, 2022 at 2:43 PM Miroslav Lichvar
wrote:
On Tue, Aug 30, 2022 at 02:27:22PM +0200, Ray Vanbeek wrote:
> Running ptp4l as a slave, what influences the rate at which Delay Request
> Messages are sent out? Pretty standard, the GM send out Announce Messages
> every 2 secs, Sync and Follow_Up Messages every second.
> The slave sends out Delay
Running ptp4l as a slave, what influences the rate at which Delay Request
Messages are sent out? Pretty standard, the GM send out Announce Messages
every 2 secs, Sync and Follow_Up Messages every second.
The slave sends out Delay Request Messages irregular: ranging from <1 sec
to 16 sec between
Hi All,
I am trying to run the linuxptp in boundary clock mode, but facing some
issues.
Below is my setup.
GrandMaster --> (eth1) Device (eth2) <--->(eth3)Device2
To get a timestamp on Device2 by running the boundary clock on device 2.
1. Grandmaster <---> eth1(slave)
2. eth2
Hi Team,
ts2phc:
I am facing issue when trying to updating timestamp with ts2phc.
below is my configuration
master <--> eth0 (Device 1 -device acts as boundary clock) eth1 <--->
etho(Device 2-slave)
Device 1:
eth0 - is slave to master
eth1 - is master to Device 2
ts2phc.cfg
