On Sun, Jan 24, 2016 at 03:40:50PM +, Namit Agrawal wrote:
> This is the output of the following 2 commands:
> ethtool -i eth0
> driver: e1000
...
> 00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet
> Controller (rev 02)
Right, so this device doesn't have any HW timest
This is the output of the following 2 commands:
ethtool -i eth0
driver: e1000
version: 7.3.21-k8-NAPI
firmware-version:
bus-info: :00:03.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
lspci
00:00.0 Host bridge: Int
On Fri, Jan 22, 2016 at 05:22:00AM +, Namit wrote:
> I installed ixgbe driver also. But still no results.
> Also I tried to install igb driver but it is not compatible with the current
> kernel.
Those two drivers are for two completely different cards. First off,
you need to find out what har
Hi,
For the past week, I am trying to run linuxptp-1.6 but it is giving
errors. I give the following command- "ptp4l -i eth0 -m"
The error is "the device eth0 does not have timestamping capability". Also
when I run ethtool -i eth0 it gives that \
PTP Hardware Clock : none
Hardware Transmit Tim
