Hi,
me too =P...but with other motherboards (via,soyo,aimc,etc.) and mouses aimc also =)...
On Fri, 19 Apr 2002, VeNuS InFoTeCH wrote:
> > Hi
> >
> > I'm using ubiquitus Tawanese MBs. For one of my LTS terms, Spacewalker
> > Apollo board with a trident vga chipset ...
> >
> > II) TRIDENT: driv
> Hi
>
> I'm using ubiquitus Tawanese MBs. For one of my LTS terms, Spacewalker
> Apollo board with a trident vga chipset ...
>
> II) TRIDENT: driver for Trident chipsets: tvga8900d, cyber9320,
> cyber9388, cyber9397, cyber9397dvd, cyber9520, cyber9525dvd,
cyberblade/e4,
> tgui9420dgi, tgu
I'm expanding my ltsp network and buying some new hardware.
>From local PC shop I can get ATI Rage128, Radeon 700, or GForce2MX200 cards.
What's working best in ltsp clients?
I read somewhare that Nvidia supports remote GL rendering?
Other components will be:
- microATX board and case,
- Via C3 CP
I have two test terminals, one with RTL8139 PCI card
that is booting but only at half duplex, my server
have a RTL8139 too, and I am using a 10Mb hub, if I
use a 100Mb switch none RTL8139 card even sync with
it. This is my first problem.
But my nightmare is with the other terminal using a
3c509 I
List,
I have the Xvesa server and the font server working, but I cant get the font server to
work under Xvesa.
I noticed Xvesa does not have a file comparable to rc.setupx or rc.setupx3.
How do I set this up?
--
James Bittner
Business Analyst
[EMAIL PROTECTED]
__
James,
I've seen this happen on when running VMware displaying
on the LTSP workstation.
The answer was either using hwcursor or swcursor, I don't
remember which, but it was an option in the XF86Config
file.
I think that was back with X3.3.6. I'm using X4.1.0 now,
and I don't have any problem.
Hi
I'm using ubiquitus Tawanese MBs. For one of my LTS terms, Spacewalker
Apollo board with a trident vga chipset ...
II) TRIDENT: driver for Trident chipsets: tvga8900d, cyber9320,
cyber9388, cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4,
tgui9420dgi, tgui9440agi, tgui
Hi
I have a server with 15 LTS terminals. All works perfectly (after all
I've done this lots, and have lots of sites) except ...
If I boot the server and all the terms (power-on) at the same time
then xinet shutsdown because of looping and instead of slowly booting the
xterms in batches NOTHING
Il giorno Thu, 18 Apr 2002, Richard Simpson così ha scritto:
|From: Richard Simpson <[EMAIL PROTECTED]>
|To: [EMAIL PROTECTED]
|Date: Thu, 18 Apr 2002 18:09:15 +0100
|Subject: [Ltsp-discuss] Upgrade client to 2.4.18
|
|Hello,
|
|I have been trying to upgrade my LTSP clients to the 2.4.18 kernel.
Il giorno Thu, 18 Apr 2002, Richard Simpson così ha scritto:
|From: Richard Simpson <[EMAIL PROTECTED]>
|To: [EMAIL PROTECTED]
|Date: Thu, 18 Apr 2002 18:09:15 +0100
|Subject: [Ltsp-discuss] Upgrade client to 2.4.18
|
|Hello,
|
|I have been trying to upgrade my LTSP clients to the 2.4.18 kernel.
Il giorno Thu, 18 Apr 2002, Tom Brown così ha scritto:
|From: Tom Brown <[EMAIL PROTECTED]>
|To: [EMAIL PROTECTED]
|Date: Thu, 18 Apr 2002 09:56:47 -0500
|Subject: Re: [Ltsp-discuss] problem with dhcp server
|
|
|I have a similar problem booting a Dell GXM 5133 with a 3c509 isa nic
|(built-in the
On Thu, 18 Apr 2002, Richard Simpson wrote:
> dhclient complains about CONFIG_PACKET and CONFIG_FILTER. The options are
> definately set in the kernel config. Searching the net, I gained the
> impression that I might need a more recent version of dhclient.
hi Richard,
try to use the kernel bu
Hello,
I have been trying to upgrade my LTSP clients to the 2.4.18 kernel. I
followed the instructions in the manual, but I am having the following
problems.
dhclient complains about CONFIG_PACKET and CONFIG_FILTER. The options are
definately set in the kernel config. Searching the net, I
I am attempting to install LTSP v3.0 on RedHat 6.2 with the very first
package, ltsp_core
rpm -ivh ltsp_core-3.0.0-1.i386.rpm
and got this error
error: failed dependencies
rpmlib (PayloadFilesHavePrefix) <= 4.0.0 needed by ltsp_core-3.0.0-1
rpmlib (CompressedFileNames) <= 3.0.4-1 needed by ltsp
Hello,
I using ltsp 3.0.0 and the configuration of file lts.conf
defined
XF86CONFIG_FILE = XF86Config.myhost
The file is place it in the /opt/ltsp/i386/etc but
not function correctly. my hosts client download the kernel
and show error for this option.
Thank's for help,
--
Andres Taborda
Novara Sari Jambak wrote:
> i used a floppy to boot my workstation. I loaded the
> file from rom-o-matic.net using cat command. But te
> workstation stopped at searching for server (DHCP):
>
> Here is what the e\workstation displayed:
> C000 32K SHADOW ENABLED
> .21. DONE
> ROM
Novara,
I forgot to ask - What distro are you running? Or more specifically, what version of
dhcpd are you running?
As for the tftp, are you sure that it is installed on the server?
>From your error message, it appears that not having tftp is not yet the problem.
>Either your workstation canno
At 03:42 AM 04/18/2002 -0700, Novara Sari Jambak wrote:
>
>i used a floppy to boot my workstation. I loaded the
>file from rom-o-matic.net using cat command. But te
>workstation stopped at searching for server (DHCP):
>
>Here is what the e\workstation displayed:
>C000 32K SHADOW ENABLED
>.21.0
Novara,
You might want to verify that dhcpd is in fact running.
Try $ netstat -an | grep ":67" to see if it is running. You should see something like
"udp0 0 0.0.0.0:67 0.0.0.0:*"
If you don't then dhcpd is probably not running. You might want to post your
dhcpd.conf h
On Thu, Apr 18, 2002 at 04:54:56PM +0530, Prakash Advani wrote:
> The client 1 runs extremely slow wheres client 2 runs fine. Is the
> slowness due to difference in the Ethernet Card? Isn't X suppose to be
> low on network resources since it was designed in the age of 9.6 Kbps
> Serial Connecti
One of my clients runs extremely slow. After the login prompt comes, I
enter the login name. Now when I hit TAB to go to the password prompt it
takes almost 2-3 minutes. After I login, KDE also takes time to load and
menus, icons and applications take a long time to get refreshed.
I have two c
Il giorno Wed, 17 Apr 2002, Alessandro Selli così ha scritto:
|From: Alessandro Selli <[EMAIL PROTECTED]>
|To: Stanley 'pm <[EMAIL PROTECTED]>
|Date: Wed, 17 Apr 2002 15:46:23 +0200 (CEST)
|Subject: Re: [Ltsp-discuss] PC HP Windows Client 425SX
|
[...]
|
| If (as it seems to me) it's an ISA bu
i used a floppy to boot my workstation. I loaded the
file from rom-o-matic.net using cat command. But te
workstation stopped at searching for server (DHCP):
Here is what the e\workstation displayed:
C000 32K SHADOW ENABLED
.21. DONE
ROM segment 0x0800 length 0x4000 reloc 0x9400
Etherboot
On Thu, 18 Apr 2002, Olav Øiehaug wrote:
> Same problem
> With me the message:
> initrd extends beyond end of memory -
> disabling initrd
>
> What do I do next?
I've just had one out of nine HP Vectras (P166's) do this to me. It had 80
megs of ram in it. I took out some (leaving 64 I thi
Måndag 15. april 2002 16:32 skreiv du:
> Sheilafel,
>
> If you are getting the 'VFS' panic, that probably indicates
> there was a problem with installing the initrd in memory.
>
> Press Shift-PageUp, and scroll back through the boot messages.
> Way up near the top, you should see where the memory
On Wed, Apr 17, 2002 at 05:54:34PM +0200, Hans Ekbrand wrote:
> So if you have a decent dhcp server running on MS Windows NT, just
> configure it so that the LTSP clients is instructed to get their
> kernel via tftp from your LTSP server.
>
> I think the relevant option is "tftp-server-name"
I t
26 matches
Mail list logo
