Hello List,
After reading the posts on CAD by a handful of people, I start to
think of what best solutions can LTSP and Linux come to.
I have tried QCad which reads only DXF file type. Someone also posted
about a cad which runs on windoze only at this moment.
For 2D, the workstations will be us
> I have tested it under my own distribution and also Red Hat 7.3. I
> forgot to mention that you need dhcp-3. Version 3 supports pxe booting,
> I used rpm to erase the old version 2 dhcp. I downloaded the latest
> version dhcp-3.0.1rc9.tar.gz from www.isc.org (this version fixes a
> serious secur
Michel,
Redhat 7.3 uses xinetd, not inetd. But, 7.2 used xinetd
also. What that means is that you should be looking
for /etc/xinetd.d/tftp, not /etc/inetd.conf.
So, see if you have /etc/xenetd.d/tftp, and inside that
file, make sure it says 'disable = no'.
Then, to test it, do this:
netsta
LTSP 3.0.4
Moving from RedHat 7.2 to 7.3 with I think identical configuration.
Running services are the same on both systems.
In 7.2 everything is working well but not in 7.3.
Ltsp stations are unable to boot
>From PXE it jam at Network boot
and getting the BOOT SERVER ID: 192.168.0.254
and gi
On Sat, 2002-05-25 at 23:06, Michel Donais wrote:
> cheaper from Taiwan or else.
>
> On an other point of view did you make your Eden testing under Red Hat 7.3
> or some other Linux version?
>
> Michel
>
I have tested it under my own distribution and also Red Hat 7.3. I
forgot to mention that y
Case Outlet has fanless barebones (no cdrom, hard drive or memory) VIA itx
system for $189 or $195 U.S. depending on cpu.
http://www.caseoutlet.com/NWPc/2677/itx2677.html#order
Would be a winner if the price were lower. ThinkNics have more hardware for
barely more money.
Tom
At 09:06 AM 05/25/
> How does it work with PXE and LTSP?
Very fine; see instructions in that file:
http://prdownloads.sourceforge.net/ltsp/pxestuff.tgz
You may also need DHCP 3.0 available at:
ftp://k12linux.mesd.k12.or.us/pub/distributions/K12LTSP-rpms/2.0.1/dhcp-3.0-
5_lts.i386.rpm
Michel
From: Martin Herweg <[EMAIL PROTECTED]>
> Doghater wrote:
> > I have finally got the client working (at 640x480 8bit color),
Programs that use GDK (such as Mozilla) don't work on 8bit displays.
> > TuxRacer doesn't appear (OpenGL program...)
You have a configuration problem in your OpenGL suppo
>Ooohh...looks like I found my RV, GPS-Computer. Did you happen to
notice >how MUCH of 12V it draws? I found an SBC that takes 1600 millapes,
but it's >$400 for just the card...
This case have been made for the C3 and the power supply is enough
for the board a floppy and a small hard disk.
On Sat, 25 May 2002 09:06:31 -0400, "Michel Donais" <[EMAIL PROTECTED]> wrote:
> Subject: [Ltsp-discuss] Re: Via Eden motherboard/cpu systemsAny .net
>
> I found that case that perfectly suit for the Eden board.
> http://www.casetronic.com/Product/PCcase/2677/CS-2677.html
>
> This case get it's
On Sat, May 25, 2002 at 01:25:46PM +0200, Martin Herweg wrote:
> Paul Nelson wrote:
> > Have you tried any of these at
> > all with LTSP?
>
> yes we did.
>
> > How do their network cards work with etherboot? Can their
> > > ROM be flashed in someway as to make them totaly diskless?
>
> you d
Paul Nelson wrote:
> Have you tried any of these at
> all with LTSP?
yes we did.
> How do their network cards work with etherboot? Can their
> > ROM be flashed in someway as to make them totaly diskless?
you dont nedd to flash anything, because it works with PXE.
I dont know about BIOS flas
Subject: [Ltsp-discuss] Re: Via Eden motherboard/cpu systemsAny .net
I found that case that perfectly suit for the Eden board.
http://www.casetronic.com/Product/PCcase/2677/CS-2677.html
This case get it's 12v from a power adaptor and divert it to ATX power
with a small board in the case; so it
Rajeesh Koroth wrote:
> I am stucked on following implementaions:
>
> 1. A File Manager which shows all the Thin Terminals with network
> Neighborhood support.
there are no (interesting) files on a Thin Terminal.
All programms and user's files are on the server.
> 2.How do we give access to use
Doghater wrote:
> I have finally got the client working (at 640x480 8bit color), however, my
> problems are:
>
> Kword is unreliable...
> OpenOffice programs display on the server when executed on the client
> Galeon doesn't work (ie, type galeon on the xterm, nothing happens, and you
> have to ^c
15 matches
Mail list logo
