It's not possible while I cannot start in shell. When I set in config,
that client must start in shell, I will be on same error...
MM
Dne 12 Leden 2007, 14:52, Todd Shoemaker napsal(a):
>
> I sent my previous email too quickly. The frame buffer is probably not
> causing the problem, but if you we
Hi all
I've downloaded and built lbe from cvs
downloaded kernel source 2.6.17.8 and 2.6.19.2
built the above kernels with config-2.6.17.8-ltsp-1
2.6.19.2 with make oldconfig.
both kernels load but stop at
Running dhcpd on port 67
Error dhcpd failed!
in the kernel config i made sure that
CO
[EMAIL PROTECTED] wrote:
> You must allow the interfaces in /etc/sysconfig/dhcpd
> # Examples: DHCPD_INTERFACE="eth0"
> # DHCPD_INTERFACE="eth0 eth1 eth2 tr0 wlan0"
> # DHCPD_INTERFACE="internal0 internal1"
> # DHCPD_INTERFACE="id-00:50:fc:e4:f2:65 id-00:a0:24:cb:cc:5c
I sent my previous email too quickly. The frame buffer is probably not
causing the problem, but if you were in text mode, you might be able to
see the error that is causing the boot failure.
Miroslav Mareš wrote:
>Hi all,
>
> i have a problem. I reinstall my server with last Fedora
It sounds like an issue with the frame buffer during boot. There used to
be a kernel parameter "nofb", but I think that was removed in 2.6, and
it is a compile option now. Does anyone know how to disable the frame
buffer boot without rebuilding the kernel?
-Todd
Miroslav Mareš wrote:
>
