Hi again.
Sorry to bother you again but I really need help with this.
Perhaps somebody could point me to some resource where I could find some
info on the subject, or a mailing list more specific to the problem i am
having.
Thanks again.
On 01/12/2014 06:26 p.m., Raúl Alvarez wrote:
> He
L = H
PRINTER_0_PARITY = N
PRINTER_0_DATABITS = 8
PRINTER_0_DEVICE = /dev/ttyS0
To verify the serial port works fine, I logged in the debug console and
"echo **garbage** >/dev/ttyS0.
Thanks in advance for the help.
--
Raúl Alvarez
Centro de C
ES to test that the setup with parallel cable is working
properly, and it is.
Any hint?
Thanks
On 04/01/2012 11:14 p.m., Mark LaPierre wrote:
> On 01/04/2012 04:35 PM, Raúl Alvarez wrote:
>> Hello.
>> I am not able print with a parallel Epson LX-300,
>> I configured lts.con
Hello.
I am not able print with a parallel Epson LX-300,
I configured lts.conf with the following lines:
PRINTER_0_DEVICE = /dev/lp0
PRINTER_0_TYPE = P
I can open the port 9100 in the client but I am not able to get any
printer output.
I tried with another server running
rinting with the same version I am using.
I've seen reports of similar problems, but running on ubuntu or debian.
I will try to rebuild the image, but since python is already installed,
i don't see much use to it.
Any ideas?
---- Original Message
Subject:
Hello, I am having problems printing in kiwi-ltsp5 under OpenSuSE 11.4.
I posted this same question in kiwi-ltsp-users, but could not solve it yet.
I'm not able to get printers working in my thinclients.
So far I tried usb an parallel interfaces.
The dmesg output in the clients contains:
[1.83
