Re: [Ltsp-discuss] (no subject)

Hi, The first mistake seems the connection. Is it well connected? Greetings, Erwin. Reg Bennett wrote: > Need some help! The client could not complete the boot to the server > and we are trying to figure out > what the issue is. Anyone out there can look at the message below and > give us som

Re: [Ltsp-discuss] Blank white screen after login : Edubuntu 7.04

Hi, What gui are you using? If using gnome, use 'gdm' instead. ldm is unknown to me, sorry. Greetings, Erwin. mss mandv wrote: > Hello, > > I have set up a 7.04 Edubuntu server and am trying to connect from a > thin client. If I use a "SCREEN_03=startx", it works fine and I can > login and

Re: [Ltsp-discuss] printer for ltsp

Dear Richard, If you'd like a laserprinter, than the HP Laserjet 2600n is very good and easy to set up. Also, Lexmark has printer with Linux-drivers. Greetings, Erwin. Richard Bos wrote: > is there someone that can give an advice for a printer that is to be used in > an ltsp setup. It is for

Re: [Ltsp-discuss] Need help setting up ltsp server

Hi Eklektik, Check if dhcp3 is working on the right network interface (eth0). Check /etc/network/interfaces.. Erwin. Manoj Nair wrote: > In this case DHCP is not running > > check the DHCPD.conf in /etc and > > On 6/9/07, *Peter Scheie* <[EMAIL PROTECTED] > > wrote:

Re: [Ltsp-discuss] Problem with hostnames in DHCP 3

Hi Noel, Why not deinstall v3 on one server and install v2 on it? Greetings, Erwin. Noel wrote: > Hello all > > I'm trying to boot the same client in two different LTSP servers. Both > are LTSP 4.2 but one has DHCP 2 and the otrher has DHCP 3. > > The problem is that the v2 server gives a h

Re: [Ltsp-discuss] Very slow. Problem with client graphic configuration

Hi Francisco, This is a nice starting point: http://www.ltsp.org/twiki/bin/view/Ltsp/Sound Furthermore, I had to tell all programs, that needed sound to either use esd or nasd. I could do this in the conf-file of each program. Greetings, Erwin. Francisco Javier Cervilla Sáez de Tejada wrote:

Re: [Ltsp-discuss] Sound on client-error

; hi erwin, > > you have to configure mplayer for using esddriver (if your sound daemon > is esd). maybe switching in the general configuration to esd might help. > > kind regards > markus > > Am Donnerstag, den 12.04.2007, 18:09 +0300 schrieb egroen: >> Dear all, >>

Re: [Ltsp-discuss] Very slow. Problem with client graphic configuration

Hi Francisco, Maybe hash out these lines in lts.conf; # X_HORZSYNC = "31-81" # X_VERTREFRESH = "56-75" # X_MODE_0 = 1280x1024 # X_COLOR_DEPTH = 16 and see what settings the client takes. Maybe it already works...? Greetings, Erwin. Francisco

[Ltsp-discuss] Sound on client-error

Dear all, On my ltsp-client I have a Cirrus Logic CS4614 Crystal Clear SoundFusion Audio Card. The card is recorgnised and the Gnome sound works fine. Unfortunately I cannot hear any other sound, like when using mplayer or play a cd. Any suggestions?? Thanks! Erwin. -