Verner Kjærsgaard schrieb:
Dear Manfred and list,
please elaborate on the details...
Hi,
i tried to translate my howto into english, please test it and give me a
feedback !
http://www.infracity.de/pxe/
Manfred
---
SF.Net email is
Verner Kjærsgaard schrieb:
Tirsdag 28 juni 2005 15:49 skrev Christian Vlah:
Alistair Crust schrieb:
I work at a small school in the UK and Iv'e been having problems getting
the above cards to boot.
I've programmed some TS27C256Q with the correct zrom from rom-o-matic
place the rom in the car
Tirsdag 28 juni 2005 15:49 skrev Christian Vlah:
> Alistair Crust schrieb:
> > I work at a small school in the UK and Iv'e been having problems getting
> > the above cards to boot.
> >
> > I've programmed some TS27C256Q with the correct zrom from rom-o-matic
> > place the rom in the card and noth
Alistair Crust schrieb:
I work at a small school in the UK and Iv'e been having problems getting the
above cards to boot.
I've programmed some TS27C256Q with the correct zrom from rom-o-matic place the
rom in the card and nothing, bios skips it and just asks for bootable media, yes
the bois i
Hi
I work at a small school in the UK and Iv'e been having problems getting the
above cards to boot.
I've programmed some TS27C256Q with the correct zrom from rom-o-matic place the
rom in the card and nothing, bios skips it and just asks for bootable media, yes
the bois is set to boot from netwo
Does anyone know how to enable the bootrom on these nics?
thanks
garry
---
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an
As far I know there is a bug in the 3c905b that prevents parts of the
bootrom above 8k from being read. There is apparently a workaround, see
http://www.han.de/~gero/netboot/archive/msg01394.html but I have never
tried it - far easier to stick with what works.
cheers
ed
On Wed, 2003-08-06 at 00:2
Hallo Mario,
> I trying to boot over network for 2 weeks now. The only way to realize is
> the use of a floppydisk.
> But I want a diskless terminal.
> I use following nic's: 3C905B-TX(Image: eb-5[1].0.9-3c905b-tpo100.lzrom)
> and 3C905C-TX-M (Image: eb-5[1].0.9-3c905c-tpo.lzrom)
> 3C905B-TX:
>
[EMAIL PROTECTED] scripted ::
>EPROM and EEPROM are different semiconductor technologies. EPROMs
>require a higher voltage than normal to program and can only be erased
>by UV light. You can tell an EPROM by the quartz window on the top of
>the chip, unless it's one of those one time programmables
>>You cannot burn EPROMS with a NIC because the card does not supply the voltage
>>needed for the programming process of the eprom.
>>
>>flash memory (e.g. AT29C512 or AT29C010) can be programmed onboard of the 3COM
>>905b-TX NIC. So you have to prove if flash memory can be used with your NICs,
Hello Josiah,
Tuesday, June 24, 2003, 10:15:58 PM, you wrote:
>>You cannot burn EPROMS with a NIC because the card does not supply the voltage
>>needed for the programming process of the eprom.
>>
>>flash memory (e.g. AT29C512 or AT29C010) can be programmed onboard of the 3COM
>>905b-TX NIC. So
>You cannot burn EPROMS with a NIC because the card does not supply the voltage
>needed for the programming process of the eprom.
>
>flash memory (e.g. AT29C512 or AT29C010) can be programmed onboard of the 3COM
>905b-TX NIC. So you have to prove if flash memory can be used with your NICs,
>in c
On 24 Jun 2003 at 15:26, Josiah Ritchie wrote:
> >3.) The Flash ROM can be programmed while mounted on the card. An eprom
> >programmer is not needed. Use the Linux program 3c90xutil/bromutil for this.
> >You will find it in the etherboot package.
>
> Can I program an ne2000 rom in a 3C90x
> slot?
>3.) The Flash ROM can be programmed while mounted on the card. An eprom
>programmer is not needed. Use the Linux program 3c90xutil/bromutil for this.
>You will find it in the etherboot package.
Are you serious?? Here I've been sitting trying to figure out where to get
little mini-harddrives...
On 24 Jun 2003 at 13:09, [EMAIL PROTECTED] wrote:
> I use following nic's: 3C905B-TX(Image: eb-5[1].0.9-3c905b-tpo100.lzrom)
This image is the right one.
> I tried eproms from different vendors (Intel - D27C512 -120, Atmel -
> AT27C512 -15, NEC - D27C512D -15 ,...) but nothing works.
> When I s
Hello together
I trying to boot over network for 2 weeks now. The only way to realize is
the use of a floppydisk.
But I want a diskless terminal.
I use following nic's: 3C905B-TX(Image: eb-5[1].0.9-3c905b-tpo100.lzrom)
and 3C905C-TX-M (Image: eb-5[1].0.9-3c905c-tpo.lzrom)
3C905B-TX:
I tried epr
16 matches
Mail list logo
