Nirmalya,
The instructions for setting up the printer are at:
http://www.ltsp.org/documentation/ltsp-3.0.0/ltsp-3.0.html#AEN456
Basically, it involves uncommenting some options (possibly with slight
changes), in the lts.conf file.
Sincerely,
Dave Hopkins
On Fri, 2003-03-21 at 13:26, Nirmalya
Hi
I am not able to configure my printer on ltsp-client, because in my
ltsp-client "/dev/lp0" is not present. How can I make this port on my
ltsp-client. I already check that lp_server is running om my client using
command "ps -ef | grep lp_server". I also configure a jet direct print
is the printer connected directly to the thin client? if so, you should
read up on the ltsp.org website, there is a configuration example under
the documentation, the link is here:
http://www.ltsp.org/documentation/ltsp-3.0-4-en.html#AEN1249
that talks about setting up a printer via LPT or Seri
I am using SuSE 8.0 on the server and I want to use a printer on the
Thin Client, but I cannot figure out, how I can setup this? Has anybody
experience with that?
BTW, where is the mailing archive?
bye
Ronald
--
Ronald Wiplinger, Technical Director
Bright Networking Inc, http://www.2b
