Ernst,

I believe I once had to set up 4 Compaq Deskpro systems (model 2100, I 
think) as LTSP workstations.  I also installed a PCI video card in each 
one because the onboard one was either not supported or had insufficient 
video RAM.

Make sure you have gone into the BIOS and disabled the onboard video! 
XFree86 will not know which one to use unless you do this.

Jason


> From: evonklein <[EMAIL PROTECTED]>
> Date: Thu, 5 Sep 2002 14:49:07 +0200
> Subject: [Ltsp-discuss] PCI-Problem
> 
> E. Klein
> 
> I have a Compaq Deskpro as DC. It contains one PCI-slot.
> I put different cards into this slot (e.g Mach64, SVGA, S3,..).
> None of them worked with xf86config-4, only with xf86config.
> During the boot sequence I got these messages:
> 
> .
> .
> .
> PCI: BIOS32 entry (0xc00fa000) in high memory, cannot use
> PCD: Using configuration type 1
> PCI: Probing PCI hardware
> PCI: cannot allocate resource region 0 of device 00:00.0
> PCI: cannot allocate resource region 1 of device 00:00.0
> PCI: cannot allocate resource region 2 of device 00:00.0
> PCI: cannot allocate resource region 3 of device 00:00.0
> PCI: cannot allocate resource region 4 of device 00:00.0
> PCI: cannot allocate resource region 5 of device 00:00.0
> got res[1000:101f] for resource 0 of PCI device 1022:2000
> .
> ... some more messages
> .
> (II) Module mouse:vendor: "The XFree86 Project" compiled for 4.1.0, module 
> version 1.0.0
> (EE) No drivers available
> Fatal server error
> no screens found
> 
> I'm very confused about it. The first time I thought, a damaged grafic card is 
> the reason.



-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone?  Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.openprojects.net

Reply via email to