On Tue, 2004-05-11 at 20:06, hello bee wrote: > i have installed redhat 9.0 with ltsp 3.0 the problem i am facing is of the shell!! > i.e. if i bootup my client(node) in console mode it gives me correct hostname when i > issue "hostname" command while when i boot or start X it shows the hostname of the > server!! while during boot i can clearly watchout the message as " Current hostname > : ws001", what wrong i have done pls help.
AFAIK I do not think this here is a problem. Your X is running on server and all commands that you give runoff the server and report accordingly. The variable that controls your workstation thereafter is $DISPLAY:nn This is quite like you ssh in to another machine and then give host command, you will get response off that machine rather than the box from where you are physically connected. I do not think this causes any problems for running any X applications. -- Sudev Barar Learning Linux ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
