Re: [M100] pcb2molex8878

I definitely prefer the 30 minute turn around time vs a week or three. Thanks for the hint with that calibration object. That's exactly the kind of thing I don't know yet. I will avoid getting into actual Cura settings here :) I did manage to figure out how to get Sculpteo set up with a sharable

Re: [M100] Windows Weekly Model 100 Cameo

That was great to watch! All three of them commented on how great the keyboard is. So true. On Thu, Aug 29, 2019, at 7:48 AM, Kevin Becker wrote: > At about 29 minutes into the show, as Leo Laporte is about to start an Epson > ad read, he pulls out a Model 100. After the ad he goes back to t

Re: [M100] Windows Weekly Model 100 Cameo

Very neat too bad he didn't turn it on. On Thu, Aug 29, 2019 at 9:48 AM Kevin Becker wrote: > At about 29 minutes into the show, as Leo Laporte is about to start an > Epson ad read, he pulls out a Model 100. After the ad he goes back to the > m100 again for a bit. > > > https://www.thurrott.com

[M100] Windows Weekly Model 100 Cameo

At about 29 minutes into the show, as Leo Laporte is about to start an Epson ad read, he pulls out a Model 100. After the ad he goes back to the m100 again for a bit. https://www.thurrott.com/podcasts/windows-weekly/213344/redmondology-windows-weekly-636

Re: [M100] pcb2molex8878

Not bad for a first print. The Creality CR-10 can give good results. It looks like your may not have enough retraction set in the slicing software which can result in the oozing that you are seeing on your print. Hot end temp may be slightly too high which can also cause oozing. There is a great

[M100] pcb2molex8878

Astonishingly, I was just able to print a functional carrier in PLA on a Creality CR-10S. (A very common home $400 fdm printer from a year ago.) I got the printer last year but only opened the box a couple days ago and this is only my 3rd attempt to print anything at all. The carrier looked like