Date: Tue, 27 Sep 2022 18:16:31 -0500
From: Will Senn
Will the m100 work with pretty much any parallel port printer or does it
have to have a specific driver? What kinds or printers work with the
m100 these days?
I am using a Tandy DMP 130 with my CoCo and mt 100. I chose this one because it
w
TRS80 is a brand. There are substantial differences between the different models for the most part. Especially ones like the Model II. The 1, 3 and 4 had some limited compatibility but stuff written for one wouldn't necessarily work in the other. (Except that in theory you could boot a 4 into 3
I use a Seiko DPU-414 thermal printer with my T102. It has both parallel
(Centronix) and serial (9 pin female D-sub) connections. It runs off 6v
external (same power barrel connector and polarity as the M100), and has
provisions for an internal rechargeable Ni-Cd type battery (4x AA cells).
Got i
I've been reading around a bit (all over the world actually) and there's a lot
of stuff written about and for the TRS-80... as though it's a machine, not a
designation. I wonder, just how close is an m100 to these TRS-80's (Model 1, 2,
3, etc)? Should I concentrate on stuff that's written speci
I got a bunch of auto unsubs at once.
Figured I'd post here and also cc: the addresses in case any are in error.
I guess they'll all bounce.
jleach...@sbcglobal.net has been removed from M100. (disabled address)
jaa...@sbcglobal.net has been removed from M100. (disabled address)
aaterrac...@sbcgl
I'm using a virtual printer that hangs off the parallel port. Then any
browser can access it (ipad, iphone, computer, etc) and print to a modern
device.
Sadly, it seems they're not made anymore -- though there was talk about
moving the design to Github.
https://www.plaidvest.com/newprintmulti/ind