On 11/27/23 15:54, runrin wrote:
I've actually had my eye on both of these listings for a while, but I've
held off due to the high prices of TPDD2s. I will likely get an FB100
eventually, since that seems like the cheapest option.
I assume there is a similar utility floppy for the TPDD1. You don
Hi Ken did you see my message? I'm interesting in having a belt.
On Tue, 28 Nov 2023 at 04:28, Ken Gregg wrote:
>
> Sorry, I only have the TPDD2 utility floppy.
>
> I don't have the TPDD(1) floppies, and don't have a TPDD(1) drive to
> test on.
>
> The belts are compatible with either the TPDD(1
On 11/27/23 11:48, runrin wrote:
Do you know if it's possible to dump the original ROM using the
programming adapter for the FlexROM 100?
Maybe.
There are two things to worry about and I'll just think out loud right here.
1
The programming adapter presents a pinout for a 28C256, not a 27C256
I did see your message. Sorry I didn't address the belt and focused only
on your floppy diskette question.
If you'd like to order one or more drive belts from me, you can so do
through the ebay link:
https://www.ebay.com/itm/304695833943
On 11/28/2023 7:23 AM, James Zeun wrote:
Hi Ken di
I'm in the Uk
On Tue, 28 Nov 2023, 3:02 pm Ken Gregg, wrote:
>
> I did see your message. Sorry I didn't address the belt and focused only
> on your floppy diskette question.
>
> If you'd like to order one or more drive belts from me, you can so do
> through the ebay link:
>
> https://www.ebay.co
James -
Sorry I didn't connect your latest message with your earlier message,
where I responded that I had had a series of bad experiences with loss
and damage shipping internationally (even from the US to Canada), so I
stopped shipping internationally several years ago. I should have
mentio
Why not just dump it out of the M100 directly?
On Tue, Nov 28, 2023 at 9:50 AM Brian K. White wrote:
>
> On 11/27/23 11:48, runrin wrote:
> > Do you know if it's possible to dump the original ROM using the
> > programming adapter for the FlexROM 100?
>
> Maybe.
>
> There are two things to worry a
I'll have more stock in a bit
Greg
On Tue, Nov 28, 2023 at 8:37 AM Ken Gregg wrote:
>
> James -
>
> Sorry I didn't connect your latest message with your earlier message,
> where I responded that I had had a series of bad experiences with loss and
> damage shipping internationally (even from the
In Stock
On Tue, Nov 28, 2023, 8:47 AM Gregory McGill
wrote:
> I'll have more stock in a bit
> Greg
>
> On Tue, Nov 28, 2023 at 8:37 AM Ken Gregg wrote:
>
>>
>> James -
>>
>> Sorry I didn't connect your latest message with your earlier message,
>> where I responded that I had had a series of ba
Thanks Brian. I have a test clip that will work i think I'll just use
that.
On Tue, Nov 28, 2023 at 09:49:48AM -0500, Brian K. White wrote:
> On 11/27/23 11:48, runrin wrote:
> > Do you know if it's possible to dump the original ROM using the
> > programming adapter for the FlexROM 100?
>
> Maybe
This is a good idea, but I've already got my new EEPROM in there and
every time I remove it and put it back in, I get worried I'll break off
one of the legs and have to resolder it.
The leadframes used to make DIP pins on Brian's FlexROM adapter board
work well, but I really don't want to have to
That's what I do, and then convert to hex or binary on the receiving
computer as needed. There are utilities available for dumping an
option ROM as well.
On Tue, Nov 28, 2023 at 1:49 PM runrin wrote:
>
> This is a good idea, but I've already got my new EEPROM in there and
> every time I remove i
On 11/28/23 11:45, Mike Stein wrote:
Why not just dump it out of the M100 directly?
That makes much more sense really.
--
bkw
You have lost me.
If you want to dump or re-write the flexrom, you can just do it it it's
programming adapter.
I thought you wanted to dump the original rom?
And if you want to avoid all the hardware actions while changing the
main rom, that's exactly what REX Classic allows. It's purely sof
I probably missed it and can't easily find the previous discussion,
but what diameter wire do you suggest? I see the hole size 0.6mm/24
mil but not the wire gauge.
Thanks!
On Tue, Nov 28, 2023 at 7:56 PM Brian K. White wrote:
>
> You have lost me.
>
> If you want to dump or re-write the flexrom,
https://gist.github.com/bkw777/52d85d89eeff8445cc667685d05ea94d
includes some links to sources as well as specs
26 awg or 0.4mm
bkw
On Tue, Nov 28, 2023, 8:59 PM Mike Stein wrote:
> I probably missed it and can't easily find the previous discussion,
> but what diameter wire do you suggest? I
Thanks! I read most of that but didn't find the diameter specs
On Tue, Nov 28, 2023 at 9:30 PM Brian White wrote:
>
> https://gist.github.com/bkw777/52d85d89eeff8445cc667685d05ea94d
>
> includes some links to sources as well as specs
>
> 26 awg or 0.4mm
>
>
> bkw
>
> On Tue, Nov 28, 2023, 8:59 PM
17 matches
Mail list logo