; >>>> Sent: Thursday, June 15, 2017 6:09 PM
> >> >>>> Subject: Re: [M100] Tandy 200 repair, guidance requested
> >> >>>>
> >> >>>> I did check the battery before, but now that I look more closely
> >> >>>> there
>
>>> I'm a bit stumped. I didn't have any solder spillage and the battery
>> >>> polarity is correct. Any thoughts?
>> >>>
>> >>> On Thu, Jun 15, 2017 at 6:48 PM, Mike Stein <mhs.st...@gmail.com>
>> >>> wrote:
>> >
gt; >> >> >>>
> >> >> >>> I reassembled the components to test it again, and when I switch
> >> >> >>> the
> >> >> >>> memory power on the LCD immediately turns on without me pressing
> >> >> >>> the
> >> >
gt; >>> the
>> >> >>> memory power on the LCD immediately turns on without me pressing
>> >> >>> the
>> >> >>> power
>> >> >>> button. I'm still getting vertical lines and there is no response
>> >> &g
t;> power
> >> >>> button. I'm still getting vertical lines and there is no response
> when
> >> >>> I try
> >> >>> to cold start.
> >> >>>
> >> >>> I'm a bit stumped. I didn't have any solder spillage and the ba
ty is correct. Any thoughts?
>> >>>
>> >>> On Thu, Jun 15, 2017 at 6:48 PM, Mike Stein <mhs.st...@gmail.com>
>> >>> wrote:
>> >>>>
>> >>>> Definitely replace that battery soon!
>> >>>>
>
any solder spillage and the battery
> >>> polarity is correct. Any thoughts?
> >>>
> >>> On Thu, Jun 15, 2017 at 6:48 PM, Mike Stein <mhs.st...@gmail.com>
> wrote:
> >>>>
> >>>> Definitely replace that battery soon!
> >
, Jun 15, 2017 at 6:48 PM, Mike Stein <mhs.st...@gmail.com> wrote:
>>>>
>>>> Definitely replace that battery soon!
>>>>
>>>> Power on, then hold CTL BREAK and press RESET button.
>>>>
>>>> Good luck!
>>>>
>>
>> Good luck!
>>
>> - Original Message -
>> *From:* Joshua Ray <sabiorsa...@gmail.com>
>> *To:* m...@bitchin100.com
>> *Sent:* Thursday, June 15, 2017 6:09 PM
>> *Subject:* Re: [M100] Tandy 200 repair, guidance requested
>>
>> I did
r on, then hold CTL BREAK and press RESET button.
>
> Good luck!
>
> - Original Message -
> *From:* Joshua Ray <sabiorsa...@gmail.com>
> *To:* m...@bitchin100.com
> *Sent:* Thursday, June 15, 2017 6:09 PM
> *Subject:* Re: [M100] Tandy 200 repair, guidance
Definitely replace that battery soon!
Power on, then hold CTL BREAK and press RESET button.
Good luck!
- Original Message -
From: Joshua Ray
To: m...@bitchin100.com
Sent: Thursday, June 15, 2017 6:09 PM
Subject: Re: [M100] Tandy 200 repair, guidance requested
I did check
down CTRL BREAK while you press RESET
>
> - Original Message -
> *From:* Joshua Ray <sabiorsa...@gmail.com>
> *To:* m...@bitchin100.com
> *Sent:* Thursday, June 15, 2017 5:39 PM
> *Subject:* Re: [M100] Tandy 200 repair, guidance requested
>
> I don't have the
: Re: [M100] Tandy 200 repair, guidance requested
I don't have the power adapter unfortunately. Will it function just as well
on AA batteries?
Could you also explain what you mean by cold start?
Thanks!
On Thu, Jun 15, 2017 at 5:34 PM, John R. Hogerhuis <jho...@pobox.com>
I don't have the power adapter unfortunately. Will it function just as well
on AA batteries?
Could you also explain what you mean by cold start?
Thanks!
On Thu, Jun 15, 2017 at 5:34 PM, John R. Hogerhuis wrote:
> Power problems are common when you first get a Model T out of
Power problems are common when you first get a Model T out of storage.
Generally it needs to be plugged in, left on overnight to get the internal
nicad charged up. Then do a cold start to clear the RAM.
-- John.
s already helped with advice about
>>>> separating the case halves.
>>>>
>>>>
>>>>
>>>> My personal preference for prying apart cases held together with tabs
>>>> that are not too tight is an old credit card; it doesn't s
t;
>> On Thu, Jun 8, 2017 at 12:30 PM, Bob Pigford <b...@pigford.org> wrote:
>>
>>> Use a credit card? Why didn’t I think of that (as I slap myself on the
>>> forehead). Good one, Mike.
>>>
>>>
>>>
>>> Cheers!
>>>
>
rs!
>>
>>
>>
>> Bob
>>
>>
>>
>> *From:* M100 [mailto:m100-boun...@lists.bitchin100.com] *On Behalf Of *Mike
>> Stein
>> *Sent:* Thursday, June 08, 2017 10:45 AM
>> *To:* m...@bitchin100.com
>> *Subject:* Re: [M100]
, 2017 10:45 AM
> *To:* m...@bitchin100.com
> *Subject:* Re: [M100] Tandy 200 repair, guidance requested
>
>
>
> Hi Joshua, and welcome!
>
>
>
> I'm the guy who suggested you join up here and I hope you'll find the
> answers to your questions; I see Bob has alread
: [M100] Tandy 200 repair, guidance requested
Hi Joshua, and welcome!
I'm the guy who suggested you join up here and I hope you'll find the answers
to your questions; I see Bob has already helped with advice about separating
the case halves.
My personal preference for prying apart cases
Welcome to the list and the Model T community, Josh!
We have a wide range of talent here from "user" to "electrical engineer."
But generally helpful friends who will be happy share their knowledge with
you.
As far as attachments, usually it's best to host the images elsewhere and
just link to
-
From: Joshua Ray
To: M100@lists.bitchin100.com
Sent: Wednesday, June 07, 2017 4:48 PM
Subject: [M100] Tandy 200 repair, guidance requested
Hi all,
I'm new to the mailing list. I was referred here from the vcfed forum.
I have a Tandy 200 that needs some help. The power key is damaged
to move the top away from the base and allow it to release.
I hope this helps! Good luck!
Bob
From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of Joshua Ray
Sent: Wednesday, June 07, 2017 4:48 PM
To: M100@lists.bitchin100.com
Subject: [M100] Tandy 200
Hi all,
I'm new to the mailing list. I was referred here from the vcfed forum.
I have a Tandy 200 that needs some help. The power key is damaged and
disconnected from the keyboard. I have a pdf of the service manual, and I'm
trying to disassemble the device so I can check the internals and
24 matches
Mail list logo