No, what you hit is the 'biggie', most other changes are in things not
available in linuxcnc or where legacy options are still operational.
eg. all components (nearly) are instantiable, but the old loadrt still
works.
I would sort out that section and retry. If you hit more problems, the
si
Thank you, I will work through my files and identify where the MK format
differs.
Out of curiosity, I've not seen one from a quick google and search of the
MK site, but do you have a linuxcnc to machinekit porting guide available?
--
website: http://www.machinekit.io blog: http://blog.machin
You need to look at what runs on machinekit, not just try to run a
linuxcnc config without any adaption
https://github.com/machinekit/machinekit/blob/master/configs/stepper/mah_stepper.hal
is an example
You will then see that your line
loadrt [EMCMOT
Hi
I have a project that works under linuxcnc, and due to the ROS capability
of machinekit am trying to get it set up with the latter. It is a 6DOF
robot arm being run by STMBL drives. These are driven by Mesa 7i74 motion
control card through a 7i92m I/O Anything card. Firmware was installed an
On 01/01/19 21:46, Aurelien wrote:
Hi
I like if you can help me to start understanding the
possibility to add other tool to my changer.
I have same lathe as this video but without the moutning
pl
