Refer to the remap.ini link at the top of the fdm-gcode page.
You should also be familiar with the content of the integrator manual:
http://www.machinekit.io/docs/index-integrator/
...and remapping in general:
http://www.machinekit.io/docs/remap/structure/
Note that my machine configurations
Thank you for you answer charles,but ı am new at linux,so can you explain
specifically how can ı add subroutines?
21 Ocak 2019 Pazartesi 21:18:36 UTC+3 tarihinde Charles Steinkuehler yazdı:
>
> On 1/21/2019 1:29 AM, Ömür Ceran wrote:
> > Hello,
> > I was trying to make a 3d printer but when I
On 1/21/2019 9:02 AM, timohen...@gmail.com wrote:
> Hello Charles,
>
> thank you for the quick answer. If this is not supported I do not need to
> scratch my head anymore.
> Unfortunately I do not think I will be able to do that kind of programming.
>
> For now I will try a little hardware
On 1/21/2019 1:29 AM, Ömür Ceran wrote:
> Hello,
> I was trying to make a 3d printer but when I try to print any 3d model it
> gives an unknown M code problem. I search it on internet and I found that
> it is extruder temperature code. How can I solve this problem? Also I want
> to ask you a
Hello Charles,
thank you for the quick answer. If this is not supported I do not need to
scratch my head anymore.
Unfortunately I do not think I will be able to do that kind of programming.
For now I will try a little hardware patch with a HC7400 chip, as described
here.
