Re: Error in updating macports

what does `host rsync.macports.org` say? what does `traceroute rsync.macports.org` say? what does `route get rsync.macports.org` say? > On Nov 1, 2016, at 11:05 PM, Sumanth wrote: > -- Forwarded message -- > From: "Sumanth" > Date: 01-Nov-2016

Fwd: Re: Error in updating macports

-- Forwarded message -- From: "Sumanth" Date: 01-Nov-2016 12:36 PM Subject: Re: Error in updating macports To: "Ryan Schmidt" Cc: I've tried using different networks. With another network I'm got the following error message. $ port -v selfupdate

Re: Error installing gnuplot/aquaterm

> On 29 Oct. 2016, at 3:00 am, macports-users-requ...@lists.macosforge.org > wrote: > >> I am sorry if this is a silly question, but I am trying to install gnuplot >> (I am running Mac OS Sierra, recently updated and performed the MacPorts >> migration) and am getting the error shown below. Aqu

Re: Error installing gnuplot/aquaterm

On Oct 28, 2016, at 4:36 AM, Mojca Miklavec wrote: > In that case I would suggest you to run "sudo port deactivate active", > then "rm -rf /Applications/MacPorts" and potentially clean up a few > more places (I have no clue which ones). Fortunately, it's documented in the Guide: https://guide.ma

Re: Error installing gnuplot/aquaterm

On 28 October 2016 at 06:23, Tom Gederberg wrote: > I am sorry if this is a silly question, but I am trying to install gnuplot > (I am running Mac OS Sierra, recently updated and performed the MacPorts > migration) and am getting the error shown below. Aquaterm is needing to be > installed and th

Re: Error installing gmp

Hey Mojca, Ryan , DOH! Thanks. that seemed to have fixed. it. For my part, it was not very obvious that some components were not installed on that screen they should have a message saying "NOT INSTALLED" or something like that for idiots like me ... On Thu, May 19, 2016 at 11:54 PM, Mojca M

Re: Error installing gmp

On 19 May 2016 at 17:48, John T. Chung wrote: > Ryan, I reinstalled xcode from the app store and have included a screenshot > of the preferences. > As far as I can tell, it's installed. It's been long since I last installed Xcode, but I would say that there is the arrow next to 124 MB that you hav

Re: Error installing gmp

Ryan, I reinstalled xcode from the app store and have included a screenshot of the preferences. As far as I can tell, it's installed. C On Thu, May 19, 2016 at 9:07 PM, Ryan Schmidt wrote: > > On May 19, 2016, at 6:22 AM, John T. Chung wrote: > > > On Thursday, May 19, 2016, Ryan Schmidt wrote:

Re: Error installing gmp

On May 19, 2016, at 6:22 AM, John T. Chung wrote: > On Thursday, May 19, 2016, Ryan Schmidt wrote: > >> On May 19, 2016, at 5:19 AM, John T. Chung wrote: >> >> > I'm a macbook pro running OSX 10.8.5 >> > I'm trying to install gmp via mac ports but getting this error: >> > >> > sh-3.2# port inst

Re: Error installing gmp

On May 19, 2016, at 5:19 AM, John T. Chung wrote: > I'm a macbook pro running OSX 10.8.5 > I'm trying to install gmp via mac ports but getting this error: > > sh-3.2# port install gmp > Warning: The Xcode Command Line Tools don't appear to be installed; most > ports will likely fail to build.

Re: Error: Processing of port qt5-qtwebengine failed (installing py34-pyqt5 on OS X 10.8.5)

On Apr 23, 2016, at 4:23 AM, Timothy W. Grove wrote: > See below ... >>> I'm attempting to install py34-pyqt5 on OS X 10.8.5. All seems to be going >>> well until it fails on installing qtwebengine. Trying to install just this >>> package on its own with the -v flag gives me the following outpu

Re: Error: Processing of port qt5-qtwebengine failed (installing py34-pyqt5 on OS X 10.8.5)

See below ... I'm attempting to install py34-pyqt5 on OS X 10.8.5. All seems to be going well until it fails on installing qtwebengine. Trying to install just this package on its own with the -v flag gives me the following output. Can anyone suggest what this is telling me or how to fix it? Th

Re: Error: Processing of port qt5-qtwebengine failed (installing py34-pyqt5 on OS X 10.8.5)

On Apr 22, 2016, at 3:50 PM, Timothy W. Grove wrote: > I'm attempting to install py34-pyqt5 on OS X 10.8.5. All seems to be going > well until it fails on installing qtwebengine. Trying to install just this > package on its own with the -v flag gives me the following output. Can anyone > sugge

Re: Error: Failed to install openjade (El Capitan)

On Jan 19, 2016, at 06:52, Børre Ludvigsen wrote: > > OS X EL Capitan 10.11.2 (15C50) Latest Xcode, Commandline Tools, and > MacPorts for EL Capitan on a MacBook Pro (Retina, Mid 2012). > > While trying to install imagemagick and viking: > > Error: org.macports.build for port openjade retur

Re: Error

On Jan 8, 2016, at 12:42 AM, Ankit Ruhi wrote: > On Fri, Jan 8, 2016 at 12:06 PM, Ryan Schmidt wrote: > >> On Jan 8, 2016, at 12:12 AM, Ankit Ruhi wrote: >> > >> > While trying to self update macport I get the following error : >> > >> > $ port -v selfupdate >> > ---> Updating MacPorts base sou

Re: Error

On Jan 8, 2016, at 12:12 AM, Ankit Ruhi wrote: > > While trying to self update macport I get the following error : > > $ port -v selfupdate > ---> Updating MacPorts base sources using rsync > rsync: failed to connect to rsync.macports.org: Connection refused (61) > rsync error: error in socket

Re: Error upgrading macports

Have you tried doing what the message suggests? install xorg-libXt with +flat_namespace David On Mon, Jan 4, 2016 at 5:11 PM, Ted Kord wrote: > Hello, > > Upgrading macports gets stuck when openmotif. The last few lines of the > log file are > > 40 :msg:archivefetch ---> Fetching archive for o

Re: Error installing Cairo/ Pango/ ncurses/ port self updates and so on..

On 12/11/15 10:45, Ryan Schmidt wrote: On Nov 12, 2015, at 4:22 AM, Russell Jones wrote: I suggest you use Disk Utility to run disk and permissions repairs, possibly with a verify first if you want to know which files will be affected. Then see if what you describe changes. It would also be

Re: Error installing Cairo/ Pango/ ncurses/ port self updates and so on..

On Nov 12, 2015, at 4:22 AM, Russell Jones wrote: > > I suggest you use Disk Utility to run disk and permissions repairs, possibly > with a verify first if you want to know which files will be affected. Then > see if what you describe changes. It would also be useful to know whether > either of

Re: Error installing Cairo/ Pango/ ncurses/ port self updates and so on..

I suggest you use Disk Utility to run disk and permissions repairs, possibly with a verify first if you want to know which files will be affected. Then see if what you describe changes. It would also be useful to know whether either of these repairs take any action. Russell On 11/11/15 19:15,

Re: Error installing Cairo/ Pango/ ncurses/ port self updates and so on..

On Nov 11, 2015, at 1:15 PM, Gazei Ajkl wrote: > I’ve tried a lot as the following commands: > - sudo clean port … of several ports which had problems > - sudo port selfupdate > - sudo port upgrade outdated > - reinstalled gfortran-5.2-Yosemite > - uninstalled and reinstalled MacPorts-2.3.4-10.11

Re: Error installing Cairo/ Pango/ ncurses/ port self updates and so on..

On Nov 11, 2015, at 1:15 PM, Gazei Ajkl wrote: > I’m new to this whole topic. For that reason I’m sorry if there is some > unprofessional way of reporting my bug. > I’ve been using GNUplot for my scientific diagrams. > I wanted to install > sudo port install cairo +no_x11 +quartz +universal >

Re: error upgrading gcc48 port

Thanks a lot, this actually solved all my issues! Thanks again! Fab On 2 November 2015 at 00:36, Ryan Schmidt wrote: > > On Nov 1, 2015, at 6:35 PM, Brandon Allbery wrote: > > > On Sun, Nov 1, 2015 at 7:31 PM, Fabrizio Salvatore < > p.fabrizio.salvat...@googlemail.com> wrote: > > I do indeed us

Re: error upgrading gcc48 port

On Nov 1, 2015, at 6:35 PM, Brandon Allbery wrote: > On Sun, Nov 1, 2015 at 7:31 PM, Fabrizio Salvatore > wrote: > I do indeed use ROOT as analysis package: is there a version for gcc49 or > gcc5? > > "port variants root5" > Which, here, shows (among many others) the following variants > >

Re: error upgrading gcc48 port

On Sun, Nov 1, 2015 at 7:31 PM, Fabrizio Salvatore < p.fabrizio.salvat...@googlemail.com> wrote: > I do indeed use ROOT as analysis package: is there a version for gcc49 or > gcc5? "port variants root5" Which, here, shows (among many others) the following variants gcc43: Build with gfortran

Re: error upgrading gcc48 port

Thanks a lot! I see the following: root5 @5.34.18_0+cocoa+gcc48+graphviz+gsl+minuit2+opengl+roofit+soversion+ssl+tmva+xml root5 @5.34.18_0+cocoa+gcc48+graphviz+gsl+minuit2+opengl+python27+roofit+soversion+ssl+tmva+xml root5 @5.34.23_0+cocoa+gcc48+graphviz+gsl+http+minuit2+opengl+python27+roo

Re: error upgrading gcc48 port

On Nov 1, 2015, at 4:04 PM, Fabrizio Salvatore wrote: > this should be the last log of the upgrade outdated command. > > Thanks! The file you attached is just a log of gcc48 failing to build; it doesn't tell us what caused the gcc48 build to be attempted. Try this: port installed | grep gcc4

Re: error upgrading gcc48 port

Hi, this should be the last log of the upgrade outdated command. Thanks! Fab On 1 November 2015 at 21:10, Chris Jones wrote: > > > On 1 Nov 2015, at 5:13 p.m., Fabrizio Salvatore < > p.fabrizio.salvat...@googlemail.com> wrote: > > I simply did a port upgrade outdated. after I moved to the

Re: error upgrading gcc48 port

> On 1 Nov 2015, at 5:13 p.m., Fabrizio Salvatore > wrote: > > I simply did a port upgrade outdated. after I moved to the new OS... :-( Then, as i already asked, which port was being upgraded just before the installation of gcc48 was triggered ? The output should tell you this. Just pos

Re: error upgrading gcc48 port

I simply did a port upgrade outdated. after I moved to the new OS... :-( On 1 November 2015 at 16:53, Marius Schamschula wrote: > Fabricio, > > Unfortunately, yes. > > Plan B: You have to find the port(s) that require gcc. Most likely were > are looking for another port that needs Fortran.

Re: error upgrading gcc48 port

what command where you running that triggered the installation of gcc48 ? Send the full output, messages before the ones you first posted probably tell you what was doing it. > On 1 Nov 2015, at 4:35 p.m., Fabrizio Salvatore > wrote: > > Hi Marius, > > I see the following: > > sudo port de

Re: error upgrading gcc48 port

Fabricio, Unfortunately, yes. Plan B: You have to find the port(s) that require gcc. Most likely were are looking for another port that needs Fortran. Given that you are a scientist, that could mean any number of candidates. What were you trying to install when your machine attempted to insta

Re: error upgrading gcc48 port

Hi Marius, I see the following: sudo port dependents gcc48 Password: Error: Registry error: gcc48 not registered as installed. Do I have it installed in order to check dependencies? Cheers, fab On 1 November 2015 at 16:26, Marius Schamschula wrote: > Fabrizio, > > What does > > port depend

Re: error upgrading gcc48 port

Fabrizio, What does port dependents gcc48 tell you? It is possible that there are ports left that build a gcc48 variant by default. You may have to manually choose a +gcc49 or +gcc5 variant for those. On Nov 1, 2015, at 10:19 AM, Fabrizio Salvatore wrote: > Hi all, > > thanks for the help

Re: error upgrading gcc48 port

Hi all, thanks for the help. I have installed gcc49 and gcc5 and unistall gcc48, but if I try again to do port upgrade outdated I see again the following: ---> Computing dependencies for gcc48 ---> Building gcc48 Error: org.macports.build for port gcc48 returned: command execution failed Please

Re: error upgrading gcc48 port

On 2015-10-30 13:59, Mojca Miklavec wrote: > On Fri, Oct 30, 2015 at 1:49 PM, Chris Jones wrote: >> On 30/10/15 12:26, Fabrizio Salvatore wrote: >>> >>> I see that there are two ports related to gcc48, one of which is active: >>> >>> ---> The following versions of gcc48 are currently installed: >>

Re: error upgrading gcc48 port

On Fri, Oct 30, 2015 at 1:49 PM, Chris Jones wrote: > On 30/10/15 12:26, Fabrizio Salvatore wrote: >> >> I see that there are two ports related to gcc48, one of which is active: >> >> ---> The following versions of gcc48 are currently installed: >> ---> gcc48 @4.8.2_2 >> ---> gcc48 @4.8.

Re: error upgrading gcc48 port

On 30/10/15 12:26, Fabrizio Salvatore wrote: I see that there are two ports related to gcc48, one of which is active: ---> The following versions of gcc48 are currently installed: ---> gcc48 @4.8.2_2 ---> gcc48 @4.8.3_3 (active) How do I remove both and make gcc49 the default one?

Re: error upgrading gcc48 port

I see that there are two ports related to gcc48, one of which is active: ---> The following versions of gcc48 are currently installed: ---> gcc48 @4.8.2_2 ---> gcc48 @4.8.3_3 (active) How do I remove both and make gcc49 the default one? Thanks for your help! Fab On 29 October 2015

Re: error upgrading gcc48 port

On Thu, Oct 29, 2015 at 10:43 PM, Fabrizio Salvatore < p.fabrizio.salvat...@googlemail.com> wrote: > Is there any instruction anywhere on how to do that? Port uninstall . -- Eneko Gotzon Ares enekogot...@gmail.com _

Re: error upgrading gcc48 port

Hi Chris, thanks. Is there any instruction anywhere on how to do that? Thanks! Fab On 29 October 2015 at 12:20, Chris Jones wrote: > Hi, > > Gcc 4.8 currently does not build on OSX 10.11. > > https://trac.macports.org/ticket/48471 > > I recommend uninstalling it, and any ports that need it, a

Re: error upgrading gcc48 port

Hi, Gcc 4.8 currently does not build on OSX 10.11. https://trac.macports.org/ticket/48471 I recommend uninstalling it, and any ports that need it, and reinstall them using a new gcc version. Chris > On 29 Oct 2015, at 10:10 a.m., Fabrizio Salvatore > wrote: > > Hi all, > > I have tried

Re: Error when starting python3

> On 20/set/2015, at 11:14, Glenn Ramsey wrote: > > Neither of those had any output. > > I installed python 3.4, which worked OK, and then reinstalled 3.5rc4 and it > works now. It must have been some sort of configuration issue as you > suggested. > > Thanks for your reply. Ok, glad you sort

Re: Error when starting python3

Hi Aljaž, On 14/09/15 22:46, Aljaž Srebrnič wrote: >> On 14/set/2015, at 05:55, Glenn Ramsey wrote: >> >> Hi All, >> >> I get this error when starting python3: >> >> $ python3 >> Python 3.5.0rc4 (default, Sep 14 2015, 13:58:59) >> [GCC 4.2.1 Compatible Apple LLVM 6.1.0 (clang-602.0.53)] on darwin

Re: Error when starting python3

> On 14/set/2015, at 05:55, Glenn Ramsey wrote: > > Hi All, > > I get this error when starting python3: > > $ python3 > Python 3.5.0rc4 (default, Sep 14 2015, 13:58:59) > [GCC 4.2.1 Compatible Apple LLVM 6.1.0 (clang-602.0.53)] on darwin > Type "help", "copyright", "credits" or "license" for mo

Re: Error: Insufficient privileges to write to MacPorts install prefix.

On Fri, 07 Aug 2015, Mihai Moldovan wrote: > > https://support.apple.com/en-us/HT202035 > > That's the way better answer. > > Also, make sure that your user account type is setup as "Administrator", not > "Standard" or "Guest" in System Preferences -> Users and Groups (it should be, > but please

Re: Error: Insufficient privileges to write to MacPorts install prefix.

The password thing worked. Already had a password, but thought sudo was asking me for a sudo credential, which I didn't have (as Ludwig noted). It was asking me for my iMac password! When I entered it, the port install command worked immediately. Thanks for your help! Beers all around. On Fri, Aug

Re: Error: Insufficient privileges to write to MacPorts install prefix.

On 07.08.2015 10:37 AM, Rainer Müller wrote: > On 2015-08-07 07:03, Jim Mattingly wrote: >> Getting the above-referenced error code when attempting command: port >> install pspp, Have even tried sudo, although it is only a single-user >> computer at home, then sudo scolds me and asks for a password

Re: Error: Insufficient privileges to write to MacPorts install prefix.

On 2015-08-07 07:03, Jim Mattingly wrote: > Getting the above-referenced error code when attempting command: port > install pspp, Have even tried sudo, although it is only a single-user > computer at home, then sudo scolds me and asks for a password I don’t > have. Downloaded Xcode from app store a

Re: Error: Insufficient privileges to write to MacPorts install prefix.

On Fri, 07 Aug 2015, Jim Mattingly wrote: > Getting the above-referenced error code when attempting command: port install > pspp, Have even tried sudo, although it is only a single-user computer at > home, then sudo scolds me and asks for a password I don’t have. Downloaded > Xcode from app store

Re: Error in self update

Yes, these are the DNS settings for me too. On Mon, Jul 13, 2015 at 6:53 PM, Brandon Allbery wrote: > On Mon, Jul 13, 2015 at 8:59 AM, mohit rastogi > wrote: > >> rsync: getaddrinfo: rsync.macports.org >> >> 873: nodename nor servname provided, or not known > > Check your DNS config. (I keep 8.

Re: Error in self update

On Mon, Jul 13, 2015 at 8:59 AM, mohit rastogi wrote: > rsync: getaddrinfo: rsync.macports.org > > 873: nodename nor servname provided, or not known Check your DNS config. (I keep 8.8.8.8 and 8.8.4.4 around as backup DNS, as my provider sometimes screws up their DNS.) -- brandon s allbery kf8

Re: Error installing py-virtualenvwrapper

Thank you, everything works perfectly now! On Tue, Jun 16, 2015 at 10:01 PM, Lawrence Velázquez wrote: > On Jun 16, 2015, at 11:47 PM, Yang Zhang wrote: > > > Ran into the below error—not sure what the next steps are as this > > doesn't necessarily seem like an issue with MacPorts itself, but I

Re: Error installing py-virtualenvwrapper

On Jun 16, 2015, at 11:47 PM, Yang Zhang wrote: > Ran into the below error—not sure what the next steps are as this > doesn't necessarily seem like an issue with MacPorts itself, but I'm > not sure. Below is the log > /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.or

Re: Error installing py-virtualenvwrapper

On Jun 16, 2015, at 11:53 PM, Brandon Allbery wrote: > On Tue, Jun 16, 2015 at 11:47 PM, Yang Zhang wrote: >> :info:build Download error on https://pypi.python.org/simple/pbr/ : [SSL: >> CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:590) -- Some >> packages may not be found! >

Re: Error installing py-virtualenvwrapper

On Tue, Jun 16, 2015 at 11:47 PM, Yang Zhang wrote: > :info:build Download error on https://pypi.python.org/simple/pbr/ > > : [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:590) > -- Some packages may not be found! > Sounds like you might have an evil (MITM) https proxy in th

Re: Error building geoclue (was: Error in selfupdate)

On Apr 19, 2015, at 4:32 PM, Dave Horsfall wrote: > Yosemite 10.10.3 (updated religiously), MacPorts 2.3.3 > > :info:build Making all in gpsd > :info:build make[3]: Entering directory > `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_geoclue

Re: error while "building uhd"

Hi Jim - I'm going to work with you off-list since this is a 32/64 bit issue & will require some programming work on my part and testing on your part. If we come up with something relevant to this list, I'll email a summary. - MLD On Wed, Mar 4, 2015, at 06:27 PM, Jim Goudie wrote: > OS X 10.6.8 >

Re: error while "building uhd"

Hello Rainer, OS X 10.6.8 Xcode 3.2 (I haven't found an upgrade for this, yet... 3.2.6?) Yes... it is a 32-bit Macbook Pro, 2 Ghz Intel Core Duo; 2 GB ram Jim On Mar 4, 2015, at 6:07 PM, Rainer Müller wrote: > On 2015-03-04 23:09, Jim Goudie wrote: >> Office:~ Jim$ vim >> /opt/local/var/macpor

Re: error while "building uhd"

On 2015-03-04 23:09, Jim Goudie wrote: > Office:~ Jim$ vim > /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_uhd/uhd/main.log > > :info:build > /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ta

Re: error installing qgis

Thanks Vincent. It all works now. On Fri, Jan 2, 2015 at 1:25 AM, Vincent Habchi wrote: > Hi there! > > First of all, thanks Brandon for investigating into this. > > […] >> But now I am embarrassed to ask, how the heck do I start qgis? There >> is no qgis in /opt/local/bin > > Normally, you shoul

Re: error installing qgis

> On 2 Jan 2015, at 6:00 am, Brandon Allbery wrote: > >> On Fri, Jan 2, 2015 at 12:46 AM, P Kishor wrote: >> https://dl.dropboxusercontent.com/u/3526821/main.log > > So, the actual error is a link error for a bunch of missing symbols. Looking > for why those symbols might be missing, I fin

Re: error installing qgis

Just compress it, using bzip2 or whatever you prefer then. Text logs always compress very well so it will be much smaller... Chris > On 2 Jan 2015, at 5:46 am, P Kishor wrote: > > The log file is 360 KB, so I have put it on my Dropbox/Public folder > (see link below) > > https://dl.dropbox

Re: error installing qgis

Hi there! First of all, thanks Brandon for investigating into this. […] > But now I am embarrassed to ask, how the heck do I start qgis? There > is no qgis in /opt/local/bin Normally, you should find it in /Applications/MacPorts/QGis Best wishes for 2015! Vincent _

Re: error installing qgis

ok thanks, made some progress. 1. deleted the standalone /Applications/GRASS-6.4.app 2. `sudo port clean qgis` 3. `sudo port install qgis` ---> Staging qgis into destroot ---> Installing qgis @2.6.0_0+postgis2+postgresql93+python27 ---> Activating qgis @2.6.0_0+postgis2+postgresql93+python27 -

Re: error installing qgis

On Fri, Jan 2, 2015 at 12:46 AM, P Kishor wrote: > https://dl.dropboxusercontent.com/u/3526821/main.log So, the actual error is a link error for a bunch of missing symbols. Looking for why those symbols might be missing, I find this: :info:build ld: warning: ignoring file /Applications/GRASS-6

Re: error installing qgis

The log file is 360 KB, so I have put it on my Dropbox/Public folder (see link below) https://dl.dropboxusercontent.com/u/3526821/main.log On Thu, Jan 1, 2015 at 9:42 PM, Brandon Allbery wrote: > On Thu, Jan 1, 2015 at 11:32 PM, P Kishor wrote: >> >> Hi, I am not sure what to make of your emai

Re: error installing qgis

On Thu, Jan 1, 2015 at 11:32 PM, P Kishor wrote: > Hi, I am not sure what to make of your email. The log file is 2562 > lines long, so I included the last 20 or so lines where the actual > error message appears (or so it seems to me). > That's not the actual error message; it is where the build

Re: error installing qgis

Hi, I am not sure what to make of your email. The log file is 2562 lines long, so I included the last 20 or so lines where the actual error message appears (or so it seems to me). I'll be happy to provide any other info as required. Many thanks, On Thu, Jan 1, 2015 at 8:29 PM, Jeremy Lavergne wro

Re: error installing qgis

:notice:build Please see the log file for port qgis for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_qgis/qgis/main.log ___ macports-users mailing list macports-users@lists.m

Re: error install

On Oct 23, 2014, at 2:40 AM, Nicolas Kozic wrote: > > I can’t install blackbox, I send you the main.log. Please "sudo port clean blackbox" and then try again. If the problem persists, please file a ticket in our issue tracker. ___ macports-users mail

Re: Error installing petsc

On Oct 10, 2014, at 11:49 AM, Sean Farley wrote: > > Daniel Watkins writes: > >> I attempted to install petsc using the command >> sudo port install petsc +mpich +superlu +suitesparse >> and was unsuccessful. The log file is attached. > > Ouch. This appears to be a compiler bug with clang. What

Re: Error installing petsc

Daniel Watkins writes: > I attempted to install petsc using the command > sudo port install petsc +mpich +superlu +suitesparse > and was unsuccessful. The log file is attached. Ouch. This appears to be a compiler bug with clang. What OS and version of Xcode are you running? _

Re: Error: llvm-3.1 is not supported on Mavericks or later.

On Aug 29, 2014, at 5:59 AM, David Nicholls wrote: > > Doing a macports install after upgrading to Mavericks, and the above error is > reported. > > Since quite a lot of important stuff depends on this, how do I work around it? Nothing depends on llvm-3.1, except clang-3.1: $ port echo depend

Re: Error: llvm-3.1 is not supported on Mavericks or later.

I found a solution online: https://trac.macports.org/ticket/41116 I had not read all the way to the bottom of the migration instructions: https://trac.macports.org/wiki/Migration So I'm winding back the old macports using time machine before doing the job properly. The upgrade seems like a rat

Re: Error: Port py25-pygtk not found

On Jul 8, 2014, at 12:35 PM, farizluqman wrote: > Error: Port py25-pygtk not found > > Are py25-pygtk package being removed? py25-pygtk was removed in November 2013. https://trac.macports.org/changeset/113731 ___ macports-users mailing list macpor

Re: Error: Port py25-pygtk not found

On Tue, Jul 8, 2014 at 1:35 PM, farizluqman wrote: > I've issued this command on Mac OS X 10.9.3 when I came across the error. > > sudo port -v install py25-pygtk > > The error was: > > Error: Port py25-pygtk not found > > Are py25-pygtk package being removed? > Looks like pygtk only builds on 2

Re: Error: Processing of port xine-ui failed (fwd)

On 15/06/2014, at 3:49 AM, Mladen Pavicic wrote: > On Sat, 14 Jun 2014, Brandon Allbery wrote: >> Please clean xine-ui again and capture a full build log. > > Sorry. I obviously repeated the same command twice. Now, I'm _not_ attaching > the output of the command: port -v -d install xine-ui > bec

Re: Error: Processing of port xine-ui failed (fwd)

On Jun 14, 2014, at 12:49 PM, Mladen Pavicic wrote: >> That said, this looks suspiciously like >> http://trac.macports.org/ticket/36366 which is as yet unresolved, apparently >> because more recent versions of xine-ui only cater to Linux (or at least >> glibc's headers). > > But isn't it a ve

Re: Error: Processing of port xine-ui failed

On Sat, Jun 14, 2014 at 11:03 AM, Mladen Pavicic < mpavi...@physik.hu-berlin.de> wrote: > port clean --all xinetd > port clean --all xine-lib > port clean --all xine-ui > > Output of port -v -d install xine-ui > is in the attachement/below. > You apparently did not clean xine-ui before capturing

Re: Error in Boost shared_ptr.h

On Jun 7, 2014, at 12:03 AM, Ryan Woo wrote: > I am getting this runtime error: > > " > Assertion failed: (px != 0), function operator*, file > /usr/local/boost_1_44_0/boost/smart_ptr/shared_ptr.hpp, line 412. > Abort trap" > > With Boost 1.44.0 and icu4c 4.3.4. and Code::Blocks compiler. Runn

Re: Error installing gnu cash with +quartz

Em 06/06/2014, à(s) 10:47, René J.V. Bertin escreveu: > On Friday June 06 2014 09:55:28 Gustavo Seabra wrote: >> 2) An icon I can put on the dock. >> >> For (2) I have tried to download your DropScript, but I admit I don’t know >> how to make it work. If you have any more hints, I would really

Re: Error installing gnu cash with +quartz

On Friday June 06 2014 09:55:28 Gustavo Seabra wrote: > 2) An icon I can put on the dock. > > For (2) I have tried to download your DropScript, but I admit I don’t know > how to make it work. If you have any more hints, I would really appreciate. I'll be retouching the application a bit more tod

Re: Error installing gnu cash with +quartz

The gnucash website offers prebuilt binaries for os x. You can download those and treat them like a regular application. you can always do that. Ben On Jun 6, 2014, at 8:55 AM, Gustavo Seabra wrote: > Em 06/06/2014, à(s) 04:59, René J.V. Bertin escreveu: > >> On Thursday June 05 2014 22:

Re: Error installing gnu cash with +quartz

Em 06/06/2014, à(s) 04:59, René J.V. Bertin escreveu: > On Thursday June 05 2014 22:35:12 Gustavo Seabra wrote: >> And it did build a gnucash that apparently works fine. It’s not “native” and >> still opens the XQuartz, but it works just fine. The last question is: Is >> there a way to make a “

Re: Error installing gnu cash with +quartz

On Thursday June 05 2014 22:35:12 Gustavo Seabra wrote: > And it did build a gnucash that apparently works fine. It’s not “native” and > still opens the XQuartz, but it works just fine. The last question is: Is > there a way to make a “clickable” app from it, so I don’t need to open a > terminal

Re: Error installing gnu cash with +quartz

Em 05/06/2014, à(s) 18:45, David Evans escreveu: > On 6/5/14 2:21 PM, Gustavo Seabra wrote: >> Em 05/06/2014, à(s) 13:35, David Evans escreveu: >> >>> On 6/5/14 3:18 AM, Gustavo Seabra wrote: Em 04/06/2014, à(s) 23:51, Jason Swails escreveu: > > On Wed, Jun 4, 2014 at 10:15

Re: Error installing gnu cash with xquartz: "libcanberra must be installed with +x11"

Em 05/06/2014, à(s) 18:38, David Evans escreveu: > On 6/5/14 3:12 AM, Gustavo Seabra wrote: >> Em 04/06/2014, à(s) 23:48, David Evans escreveu: >> >>> On 6/4/14 7:15 PM, Gustavo Seabra wrote: Hi Guys, I’m trying to install gnucash by following the instructions here: http://

Re: Error installing gnu cash with +quartz

On 6/5/14 2:21 PM, Gustavo Seabra wrote: > Em 05/06/2014, à(s) 13:35, David Evans escreveu: > >> On 6/5/14 3:18 AM, Gustavo Seabra wrote: >>> Em 04/06/2014, à(s) 23:51, Jason Swails escreveu: >>> On Wed, Jun 4, 2014 at 10:15 PM, Gustavo Seabra wrote: Hi Guys, I’m trying

Re: Error installing gnu cash with xquartz: "libcanberra must be installed with +x11"

On 6/5/14 3:12 AM, Gustavo Seabra wrote: > Em 04/06/2014, à(s) 23:48, David Evans escreveu: > >> On 6/4/14 7:15 PM, Gustavo Seabra wrote: >>> Hi Guys, >>> I’m trying to install gnucash by following the instructions here: >>> >>> http://wiki.gnucash.org/wiki/MacOSX/MacPortsDetail >>> >>> According

Re: Error installing gnu cash with +quartz

Em 05/06/2014, à(s) 13:35, David Evans escreveu: > On 6/5/14 3:18 AM, Gustavo Seabra wrote: >> Em 04/06/2014, à(s) 23:51, Jason Swails escreveu: >> >>> >>> >>> On Wed, Jun 4, 2014 at 10:15 PM, Gustavo Seabra >>> wrote: >>> Hi Guys, >>> I’m trying to install gnucash by following the instruc

Re: Error installing gnu cash with +quartz

On 6/5/14 3:18 AM, Gustavo Seabra wrote: > Em 04/06/2014, à(s) 23:51, Jason Swails escreveu: > >> >> >> On Wed, Jun 4, 2014 at 10:15 PM, Gustavo Seabra >> wrote: >> Hi Guys, >> I’m trying to install gnucash by following the instructions here: >> >> http://wiki.gnucash.org/wiki/MacOSX/MacPortsDet

Re: Error installing gnu cash with xquartz: "libcanberra must be installed with +x11"

On Jun 05, 2014, at 13:19, Gustavo Seabra wrote: >> Gnucash yes, oxygen-gtk, no. I'm throwing together a portfile for that, but >> it was a straight install. Just point the install prefix to /opt/local, and >> invoke MacPort's cmake command. > > So, you mean downloading the source files (maybe

Re: Error installing gnu cash with xquartz: "libcanberra must be installed with +x11"

Em 05/06/2014, à(s) 07:32, René J.V. Bertin escreveu: > > On Jun 05, 2014, at 12:19, Gustavo Seabra wrote: > >> Thanks! Can you elaborate on that a bit? Did you build it out of Macports? > > Build what, gnucash or oxygen-gtk? Sorry, I meant gnucash. > Gnucash yes, oxygen-gtk, no. I'm throwin

Re: Error installing gnu cash with xquartz: "libcanberra must be installed with +x11"

On Jun 05, 2014, at 12:19, Gustavo Seabra wrote: > Thanks! Can you elaborate on that a bit? Did you build it out of Macports? Build what, gnucash or oxygen-gtk? Gnucash yes, oxygen-gtk, no. I'm throwing together a portfile for that, but it was a straight install. Just point the install prefix

Re: Error installing gnu cash with xquartz: "libcanberra must be installed with +x11"

Em 05/06/2014, à(s) 05:09, René J.V. Bertin escreveu: > > How complete is the OS X version of GTk anyway, nowadays? I've tried gnucash > under X11 with the oxygen-gtk2 theme installed, and it worked just fine... > > R. Thanks! Can you elaborate on that a bit? Did you build it out of Macports?

Re: Error installing gnu cash with xquartz: "libcanberra must be installed with +x11"

Em 04/06/2014, à(s) 23:51, Jason Swails escreveu: > > > > On Wed, Jun 4, 2014 at 10:15 PM, Gustavo Seabra > wrote: > Hi Guys, > I’m trying to install gnucash by following the instructions here: > > http://wiki.gnucash.org/wiki/MacOSX/MacPortsDetail > > According to them, it gnucash needs t

Re: Error installing gnu cash with xquartz: "libcanberra must be installed with +x11"

Em 04/06/2014, à(s) 23:48, David Evans escreveu: > On 6/4/14 7:15 PM, Gustavo Seabra wrote: >> Hi Guys, >> I’m trying to install gnucash by following the instructions here: >> >> http://wiki.gnucash.org/wiki/MacOSX/MacPortsDetail >> >> According to them, it gnucash needs to use xquartz, so that

Re: Error installing gnu cash with xquartz: "libcanberra must be installed with +x11"

On Wednesday June 04 2014 22:51:49 Jason Swails wrote: > You can try rebuilding libcanberra with the +x11 variant and then try > gnucash again. This is the approach I've used in the past when I've gotten > similar errors. That could work, but only if gnucash's use of libcanberra functionality do

Re: Error installing gnu cash with xquartz: "libcanberra must be installed with +x11"

On Wed, Jun 4, 2014 at 10:15 PM, Gustavo Seabra wrote: > Hi Guys, > I’m trying to install gnucash by following the instructions here: > > http://wiki.gnucash.org/wiki/MacOSX/MacPortsDetail > > According to them, it gnucash needs to use xquartz, so that’s what I’m > using. > > However, after a lon

  1   2   3   4   5   6   7   8   9   10   >