Hi Chris,
With some sited help I was able to determened that once the monitor comes on it
goes rite to sleep. I did check and it is set at 60 hurts so will have to
figure out how to switch to analog vga. Will see what happens.
Matthew
On Feb 21, 2012, at 11:34 AM, Chris Blouch wrote:
I have a 15 inch monitor comnnected with the vga addapter that I've had. It is
set at 1020-768. Should I try a lower reselosion to see if that helps.
Matthew
On Feb 21, 2012, at 12:09 AM, Chris Blouch wrote:
How is your mini connected to the screen? Maybe the resolution/frequency
Most monitors, unless they are ancient, should be able to handle
1024x768 but not all frequencies. Depending on what flavor or OSX you
have there should either be refreshrates listed with the resolutions
(1024x768 60Hz for example) or as a separate Refresh Rate popup. I think
when I've had my
Hi,
The problem I am having is that the screen will not stay on. I tried detected
displays and it is still off. I will keep messaing around with it and see what
happens.
Matthew
On Feb 19, 2012, at 10:54 PM, Chris Blouch wrote:
Hmmm. In System Preferences Displays at the very end of the
How is your mini connected to the screen? Maybe the resolution/frequency
selected is not supported on that display so the display can't sync and
gives up.
CB
On 2/20/12 9:38 AM, matthew Dyer wrote:
Hi,
The problem I am having is that the screen will not stay on. I tried detected
displays
I had it connected before I turned it on.
Matthew
On Feb 18, 2012, at 11:49 PM, Chris Blouch wrote:
Best thing is to have the monitor connected before the Mac is powered on
since the detect process seems to happen at bootup. I think it might be a
cold boot thing so you might need
Hmmm. In System Preferences Displays at the very end of the dialog is
a button called Detect Displays. Try hitting that and maybe it will
notice your screen correctly.
CB
On 2/19/12 9:49 AM, matthew Dyer wrote:
I had it connected before I turned it on.
Matthew
On Feb 18, 2012,
Best thing is to have the monitor connected before the Mac is powered on
since the detect process seems to happen at bootup. I think it might be
a cold boot thing so you might need to fully shut down, not just do a
reboot.
CB
On 2/17/12 3:21 PM, matthew Dyer wrote:
Hi all,
I just connected
Hi all,
I just connected a monitor to my mac mini and while my mac sees it there is
nothing showing on the screen. I know it works as it was tested. Is there
something I need to change in display settings? Thanks. Just wondering.
Matthew
--
You received this message because you are
