Koen Kooi wrote:
> Kalle Vahlman schreef:
>>> Tuomas (who did the builds for me) noticed that there was a configure
>>> flag given for tje libc build that most likely prevented our version
>>> from actually using the vfp
>
> Out of interest, which flag would that be?
--without-fp
--
Tuomas
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Kalle Vahlman schreef:
> 2007/2/16, Simon Pickering <[EMAIL PROTECTED]>:
> [libc/m with VFP]
>> I note that the build process was a fiddle (mainly due to my not
>> knowing the
>> debian way), and it took a couple of goes before my CFLAGS were used
>> f
2007/2/16, Simon Pickering <[EMAIL PROTECTED]>:
[libc/m with VFP]
I note that the build process was a fiddle (mainly due to my not knowing the
debian way), and it took a couple of goes before my CFLAGS were used for the
build. I also note that when I tried using the following "-mcpu=arm1136j-s
-m
> > > The whetstone results were a little surprising, in that the vfp code
> > > wasn't orders of magnitude faster than the softvfp code as expected,
> > > however this is probably (as a guess) caused by libm not being compiled
for vfp.
> Duh, I was looking at the wrong results from
> http
2007/2/12, Kalle Vahlman <[EMAIL PROTECTED]>:
2007/2/12, Simon Pickering <[EMAIL PROTECTED]>:
>
> > I was very interesseted in the floating point copro in the
> > N800 cpu and did some tests with a progamm which calculates
> > the mandelbrod set and outputs it via SDL. I put this program
> > onli
2007/2/12, Simon Pickering <[EMAIL PROTECTED]>:
> I was very interesseted in the floating point copro in the
> N800 cpu and did some tests with a progamm which calculates
> the mandelbrod set and outputs it via SDL. I put this program
> online on bomberman.garage.maemo.org. No installer, you hav
> I was very interesseted in the floating point copro in the
> N800 cpu and did some tests with a progamm which calculates
> the mandelbrod set and outputs it via SDL. I put this program
> online on bomberman.garage.maemo.org. No installer, you have
> to run the benchmarks on xterm or via ssh
On Sun, 11 Feb 2007 21:55:52 +0100
Klaus Rotter <[EMAIL PROTECTED]> wrote:
> Hi folks,
>
> I was very interesseted in the floating point copro in the N800 cpu and
> did some tests with a progamm which calculates the mandelbrod set and
> outputs it via SDL. I put this program online on
> bomber
Hi folks,
I was very interesseted in the floating point copro in the N800 cpu and
did some tests with a progamm which calculates the mandelbrod set and
outputs it via SDL. I put this program online on
bomberman.garage.maemo.org. No installer, you have to run the benchmarks
on xterm or via ssh
