>-Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] On Behalf Of ext
>Vasudevan Srinivasan
>Sent: 26. toukokuuta 2007 17:27
>To: Tony Lindgren
>Cc: maemo-developers@maemo.org
>Subject: Re: Unable to get device detected with usb host mo
Hi,
I'm facing an interesting condition. I got my setup working again without
need for any modification on the kernel. I am attaching the logs of both
working and non working condition.
I could not get enough time to check without musb DMA support in kernel,
will try that by Monday.
Everything w
* Marcell Lengyel <[EMAIL PROTECTED]> [070525 02:08]:
> Hi,
>
> I get similar babble errors every now and then with a usb keyboard. Also,
> unplugging and replugging the keyboard almost always result in babble error.
Interesting, I wonder if that happens only when low-speed devices like
keyboard
have a huge side
effect anyhow, right?
BR,
Marcell
- Original Message
From: Tony Lindgren <[EMAIL PROTECTED]>
To: Vasudevan Srinivasan <[EMAIL PROTECTED]>
Cc: maemo-developers@maemo.org
Sent: Thursday, May 24, 2007 8:21:49 PM
Subject: Re: Unable to get device detected w
Hi,
* Vasudevan Srinivasan <[EMAIL PROTECTED]> [070524 08:47]:
> Hi,
>
> The host side drivers were compiled in, CONFIG_USB_OTG_WHITELIST was set
> off.
> I could not get things up with the hub, so this time I cooked up a Y
> connector
> with external power source(a usb port from desktop without d
Hi,
The host side drivers were compiled in, CONFIG_USB_OTG_WHITELIST was set
off.
I could not get things up with the hub, so this time I cooked up a Y
connector
with external power source(a usb port from desktop without d+ and d-),
connected n800 and flash disk to other ends.
I was able to get t
Hi,
* Vasudevan Srinivasan <[EMAIL PROTECTED]> [070523 07:53]:
> Hi,
>
> I tried the usb host mode on n800 and was not success full in getting
> devices hooked up.
> These are the following that I have tried.
>
> 1. Compiled the kernel on SDK_ARMEL as per instructions at
> http://www.muru.com/linu
Hi,
I tried the usb host mode on n800 and was not success full in getting
devices hooked up.
These are the following that I have tried.
1. Compiled the kernel on SDK_ARMEL as per instructions at
http://www.muru.com/linux/n800-usb-host/ with the following patches.
kernel-source-rx-34_2.6.18-osso4
