Re: [Mailman-Users] Target individual list member with sub-addressing when sending?

2009-04-30 Thread Charles Rosenberg
Thanks again for the reply. They have given me some ideas to think about to make it all more streamlined. Please forgive me again for not making something clear enough in my previous reply. Grant wrote: 1. Create the "main" list, austrai...@lists.domain.com as an umbrella list. 2. Create a

Re: [Mailman-Users] Target individual list member with sub-addressing when sending?

2009-04-30 Thread Grant Taylor
On 04/29/09 19:43, Charles Rosenberg wrote: Thank you for this suggestion, Brad. I did take a look around to see what was out there. To be honest, the ones I saw seemed to be a bit overkill for what I need. After thinking about the setup a lot more, I determined that contrary to my original

Re: [Mailman-Users] Target individual list member with sub-addressing when sending?

2009-04-29 Thread Charles Rosenberg
Thank you to everyone who replied and gave me ideas and directions to pursue further. After reading all of the replies so far, I feel that I should clarify and respond to some of the questions raised to help me and others: > Brad Knowles wrote: > If you want a two-way anonymizing system, that

Re: [Mailman-Users] Target individual list member with sub-addressing when sending?

2009-04-29 Thread Grant Taylor
On 04/28/09 01:14, Charles Rosenberg wrote: 5. In addition to number 4, I setup a special "reply-to" address where all replies should go to. Is the "reply-to" address set to the mailing list or a different address? (I'm guessing different but I figured I had better ask to be sure.) 6.

Re: [Mailman-Users] Target individual list member with sub-addressing when sending?

2009-04-29 Thread Mark Sapiro
Charles Rosenberg wrote: > > After receiving a message through the “reply-to” address, I want the > original poster to be able to send a single message back to the > “replier,” possibly answering some question. Problem: I can’t have > the “poster” know the individual address of the “replier,” nor

Re: [Mailman-Users] Target individual list member with sub-addressing when sending?

2009-04-28 Thread Brad Knowles
on 4/28/09 1:14 AM, Charles Rosenberg said: After receiving a message through the “reply-to” address, I want the original poster to be able to send a single message back to the “replier,” possibly answering some question. Problem: I can’t have the “poster” know the individual address of the “re

[Mailman-Users] Target individual list member with sub-addressing when sending?

2009-04-28 Thread Charles Rosenberg
Hello all. I am new here, but trying my best to learn as much as possible. I searched far and wide through the Internet/FAQ and archives, but I think my question is rather unique. My Setup: Ubuntu 9.04 with newest Postfix and Dovcot running The steps I took and have done are as follows