FYI: I have put up Maestro r4431 which fixes the WMS issues.
Regards, Kenneth Skovhede, GEOGRAF A/S
Kenneth Skovhede skrev:
Hi Mark, thanks for verifying this.
I have found and fixed the bug, details are in issue #1189:
http://trac.osgeo.org/mapguide/ticket/1189
Regards, Kenneth Skovhede, GE
Hi Mark, thanks for verifying this.
I have found and fixed the bug, details are in issue #1189:
http://trac.osgeo.org/mapguide/ticket/1189
Regards, Kenneth Skovhede, GEOGRAF A/S
Mark Pendergraft skrev:
Kenneth, I attempted to add the NASA site
(http://wms.jpl.nasa.gov/wms.cgi?service=wms&ver
Kenneth,
I attempted to add the NASA site
(http://wms.jpl.nasa.gov/wms.cgi?service=wms&version-1.1.1) as a WMS and
yes, I was able to save the Feature Source by pressing "YES" on the error
dialog, and yes i'm unable create a layer with Raster geometry. All this
using 2.1 and the Maestro Preview.
I have commented on the issue created (or attempted to, since trac is
not responding):
The many messages are reported in issue #1149.
The dialog is actually a message like:
Errors detected, save anyway?
So, you can just press enter, and it should save just fine.
The error message is a defect i
Can you please file that as a bug against the Maestro component in the
MapGuide Trac so that it can be easily addressed by Kenneth? Please
include details such as the WMS site you were connecting to and the
error message received.
I still heartily recommend using the current Maestro test build fo
Installing the current version of Maestro solves the WMS connection problem.
What an aggravation that was!
I'm still not able to view a feature from the service though. None of the
feature classes have any Geometry. Please note the screen capture again. Are
you getting anything?
http://screencas
I can't speak for your install, but I was able to connect to the WMS provider
you used in your screencast in Maestro ver. 1.0.9.15910 with MGOS 2.1. I
would uninstall the beta of Maestro and install the previous version and see
if that works.
-Mark P.
Neil_w wrote:
>
> I'm running Maestro 1.1
I'm running Maestro 1.1.0.4358. I believe it is beta but it was highly touted
by Jason Birch in one of his posts so I assumed it was stable. Should I go
back to another version?
The only other thing I can think of that might be causing problems is I
downloaded an updated set of FDO providers from
f Map 3D do you have?
Regards,
Dave
From: mapguide-users-boun...@lists.osgeo.org
[mailto:mapguide-users-boun...@lists.osgeo.org] On Behalf Of Neil_w
Sent: Tuesday, December 08, 2009 8:51 AM
To: mapguide-users@lists.osgeo.org
Subject: Re: [mapguide-users] Should I give up?
Thanks to all for
Thanks to all for the suggestions and encouragement.
I'll try to address a couple of responses in one post.
To Dave Wilson regarding connecting to the WMS you posted:
Here is a screen recording of what I get when I connect to the WMS.
http://screencast.com/t/N2UwM2Rh
As you can see I cannot g
Neil,
What you are talking about is very doable, and much of it is fairly easy.
You have an excellent resource at hand which i think you aren't using
though, and that is Map 3D. Map 3D has help files to explain how to connect
to WMS and to Raster files. Open a new drawing, and try connecting t
Mark,
The objective is to serve GIS data to in-house staff who either do not have
Map or who do not know how to use it. I would like to mix in-house data with
published resources and services. Some of our data is in DWG form (contour
maps, etc.). Also I would like to overlay project drawings onto
Original Message-
From: mapguide-users-boun...@lists.osgeo.org
[mailto:mapguide-users-boun...@lists.osgeo.org] On Behalf Of Neil_w
Sent: Monday, December 07, 2009 2:21 PM
To: mapguide-users@lists.osgeo.org
Subject: Re: [mapguide-users] Should I give up?
I appreciate the encouragement but I have spent
Neil,
Perhaps an explanation of your end goals is in order. What do you aim to
achieve? After all, AutoCAD Map and Civil 3D can connect to WMS, and Raster
Images. If you are trying to display drawings with these layers in the
background, then you don't really need MapGuide. If you need to crea
Neil,
You may want to look into attending a training session offered by Mapguide
oriented vendors/consultants. They may be able to provide the training and
tutorial material you are looking for.
Some examples in your area(s):
http://www.spatialgis.com/services.html
http://www.cadsoft-consult.co
I appreciate the encouragement but I have spent lots of time researching.
That is why I am getting discouraged. For all the time I have invested I
have made little progress. Without a step by step instuction guide for
creating maps it is more a trial and error process to get anywhere, with
long di
Neil,
Don't give up. Just invest sometime researching.
DWG files are converted either by what is called a Load Procedure in
MapGuide Studio or by an export from Autocad Map.
WMS Data connections simply require the WMS server URL. This URL is
provided by the vendor you are accessing. When cre
17 matches
Mail list logo
