Stefan,
Do you have the Georaptor extension installed in SQL Dev? Have you tried to run
the verification on all of the geom data in that table?
- Tim
Timothy J Nolte - tno...@ilpcs.com
Network Planning Engineer
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS:
What language are you using, is this PHP?
- Tim
Timothy J Nolte - tno...@ilpcs.com
Network Planning Engineer
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS: 616-706-2438
Support: 616-929-0289
Fax: 616-554-6484
-Original Message-
From:
: 616-554-6484
-Original Message-
From: Lime, Steve D (DNR) [mailto:steve.l...@state.mn.us]
Sent: Saturday, January 09, 2010 11:50 AM
To: Nolte, Tim; mapserver-users@lists.osgeo.org
Subject: RE: [mapserver-users] FW: [MapServer] #3256: No valid WFSgeometries
from Oracle Spatial data
Has anyone else experienced this issue and aware of a fix?
- Tim
Timothy J Nolte - tno...@ilpcs.com
Network Planning Engineer
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS: 616-706-2438
Support: 616-929-0289
Fax: 616-554-6484
-Original Message-
Anyone have any comments on this?
Timothy J Nolte - tno...@ilpcs.com
Network Planning Engineer
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS: 616-706-2438
Support: 616-929-0289
Fax: 616-554-6484
-Original Message-
From: t...@osgeo.org
Below is a sample of my mapfile if anyone sees anything incorrect for 5.6.
Timothy J Nolte - tno...@ilpcs.com
Network Planning Engineer
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS: 616-706-2438
Support: 616-929-0289
Fax: 616-554-6484
-Original
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS: 616-706-2438
Support: 616-929-0289
Fax: 616-554-6484
-Original Message-
From: Lime, Steve D (DNR) [mailto:steve.l...@state.mn.us]
Sent: Thursday, January 07, 2010 3:55 PM
To: Nolte, Tim; mapserver-users
) [mailto:steve.l...@state.mn.us]
Sent: Mon 12/14/2009 5:35 PM
To: Lime, Steve D (DNR); Nolte, Tim; mapserver-users@lists.osgeo.org
Subject: RE: [mapserver-users] MapServer CGI + Oracle + Query,msQueryByShape no
results
Tim: Any more on this? I looked into the source over the weekend but didn't see
Something that would be helpful to know is whether you need something that
isn't very technical to setup or not. I just rolled out the use of MapGuide
Fusion using MapServer as our backend. I have it serving about 10 transparent
MapServer layers in a pretty nice interface. I've begun submitting
I have a web client that makes calls to the MapServer (5.6.0rc1) CGI. I'm
requesting the results of a query. The issue I am having is that if one of the
layers specified has no results the whole process fails with:
msQueryByShape(): Search returned no results. No matching record(s)
I've spent a good part of my morning scouring the internet trying to
find the solution to my problem. I have an HTML legend that is used by
the Chameleon framework. I can't for the life of me figure out how to
make sure that the out-of-scale (non-visible) classes don't show up in
the legend. No
Does anyone have any ideas of how to convert an SVG/EPS/PS file to
something so that I can use it as a symbol on my map? I've searched and
searched for some sort of application that will convert it to something
I can use, no luck.
- Tim
Timothy J Nolte - tno...@ilpcs.com
Network Planning
Does anyone have any experience with preparing MapInfo Vertical
Mapper/PlanetEV data for use with MapServer? I'm looking for some tips
and ways to streamline my process, as well as improve the performance of
my final MapServer maps.
Timothy J Nolte - tno...@ilpcs.com
Network Planning
I'm looking to put our map data on a storage device using NFS. I'm
curious if there are any NFS settings to tweak for best performance and
if I should be using NFSv3 or NFSv4?
- Tim
Timothy J Nolte - tno...@ilpcs.com
Network Planning Engineer
iPCS Wireless, Inc.
4717 Broadmoor Ave, Suite G
This was posted awhile back on the ka-map list.
http://boston.freemap.in/ is an example that gets it reasonably close
to
nice looking. Mapfile is linked from the about page. - Christopher
Schmidt
- Tim
Timothy J Nolte - tno...@ilpcs.com
Network Planning Engineer
iPCS Wireless, Inc.
Here is another posting from Bob, posted here last year,
All,
I'm done with the cartography, I think.
Anyone see any problems with it that are obvious? Again, this is only
the road network, and it's only for a local dataset.
This means that you have not compiled MapServer with support for Oracle
Spatial. Are you using a binary distribution, if so you'll need to compile from
source and include that path to your local Oracle Client install. What OS are
you running under?
- Tim
Timothy J Nolte -
:616-554-6484
Web: www.ipcswirelessinc.com
-Original Message-
From: youness.elmedra...@somei.fr [mailto:youness.elmedra...@somei.fr]
Sent: Tuesday, July 07, 2009 11:19 AM
To: Nolte, Tim
Cc: mapserver-users@lists.osgeo.org
Subject: Réf. : RE: [mapserver-users] problem with connection
I generally do this all via MapScript, I'm using PHP. I add some basic
layers with the styling that I want to my mapfile. Then using MapScript
I make a copy or modify the mapfile layers. I even do this with Oracle
Spatial layers. Here is a sample of my code:
$layer_data = geom
John,
I am very glad that you have brought this up. We are currently running
our MapServer on Solaris 10 x86 and I believe we are running it as 32bit
but I can't actually say for sure, I just used standard compile
instructions. We're running on two 3GHz Xeons. I have had many
complaints
...@mapgears.com]
Sent: Thursday, June 04, 2009 10:04 AM
To: Nolte, Tim
Cc: mapserver-users@lists.osgeo.org
Subject: Re: [mapserver-users] Zoom Level Layer Changes
If you are not using MapScript, I think the easiest way is to add a
second coverage layer that is OFF by default and put a MINSCALE 120
In general you don't copy your php extension to your web root. You need
to copy it to your PHP extensions directory. You'll find what this is
set to in your php.ini file. When you try to dynamically load the module
it's looking to load it from the php default extensions path and not the
web root
We are running an HP/Compaq ProLiant DL380 G3, 2x 3GHz Xeon (runs as 4
procs), 8GB RAM, 150GB RAID 1 (for failover), and we're running Solaris
10.
Timothy J Nolte - tno...@ilpcs.com
Network Planning Engineer
iPCS Wireless, Inc.
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office:
Something I notice is that you don't have any MIMETYPE for your OUTPUTFORMAT.
If you want to use AGG and PNG with transparency I'd try adding:
MIMETYPE image/png; mode=24bit
to your OUTPUTFORMAT.
Timothy J Nolte - [EMAIL PROTECTED]
Network Planning Engineer
iPCS Wireless, Inc.
4717
Are you certain that you have Oracle client installed and MapServer compile
against it?
Timothy J Nolte - [EMAIL PROTECTED]
Network Planning Engineer
iPCS Wireless, Inc.
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS:616-706-2438
Fax:616-554-6484
Web:
Well, I have no problems. I'm running the same version of MapServer 5.2,
however I think I'm only running IC 10.2. What I have in my map file is;
LAYER
GROUP Switch Boundaries
NAME Kentwood
TYPE POLYGON
STATUS OFF
CONNECTIONTYPE oraclespatial
CONNECTION
, Nolte, Tim
[EMAIL PROTECTED] wrote:
Bill,
Here is a layer definition I am using for Oracle
Spatial(Locator) data.
LAYER
GROUP Cell Sites
NAME On-Air
TYPE POINT
STATUS ON
CONNECTIONTYPE oraclespatial
CONNECTION username/[EMAIL PROTECTED]
PROCESSING
When you are using AGG for your output do not use antialias true on your
layers.
- Tim
Timothy J Nolte - [EMAIL PROTECTED]
Network Planning Engineer
iPCS Wireless, Inc.
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS:616-706-2438
Fax:616-554-6484
Web:
:[EMAIL PROTECTED]
Sent: Tuesday, August 05, 2008 10:25 AM
To: Nolte, Tim; mapserver-users@lists.osgeo.org
Subject: Re: [MAPSERVER-USERS] How to map attribute data
(non-geom) from Oracle(not Spatial)?
This is exciting news! I am using Oracle 10g and get Oracle Locator
free but how do I map data
What version of Oracle are you using? If you are using 10g or higher it
comes with Oracle Locator free. Oracle Locator is like Oracle Spatial
Lite. We are using this for point data and polygons for our MapServer.
- Tim
Timothy J Nolte - [EMAIL PROTECTED]
Network Planning Engineer
iPCS
PROTECTED]
Sent: Monday, August 04, 2008 2:08 PM
To: Nolte, Tim; mapserver-users@lists.osgeo.org
Subject: RE : [mapserver-users] MapServer + Database + WFS
Hi Tim,
If it's not too late (I'm coming back from vacation), here is
a working
example with MapServer 5 (on Windows) and Oracle 10g
Is no one out there using Oracle Spatial, or any other DB, with
MapServer and WFS? There is pretty much a huge lack of documentation for
serving WFS from MapServer. It would be nice to know if what I'm
attempting is even possible or not. Thanks if someone does actually
respond.
- Tim
: www.ipcswirelessinc.com
-Original Message-
From: Yewondwossen Assefa [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 30, 2008 11:38 AM
To: Nolte, Tim
Cc: mapserver-users@lists.osgeo.org
Subject: Re: [mapserver-users] MapServer + Database + WFS
Tim,
I have used mainly Postgis
Anyone successfully serving WFS layers from an Oracle Spatial source?
- Tim
Timothy J Nolte - [EMAIL PROTECTED]
Network Planning Engineer
iPCS Wireless, Inc.
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS:616-706-2438
Fax:616-554-6484
Web:
Just upgraded to MapServer 5.2.0 yesterday. One problem that cropped up
is that I now no longer get any type of cross hatching of layers. I had
the following setup in MS5.0:
symbols.sym:
SYMBOL
NAME double-hatch
TYPE vector
POINTS
Is there a built-in facility to turn off anti-aliasing for certain
layers when using AGG in this build? I had a patch given to me by
someone else on the list that worked with MS 5.0, that patch doesn't
work on this build. Thanks.
- Tim
Timothy J Nolte - [EMAIL PROTECTED]
Network Planning
Finally got around to trying out Fusion + UMN MapServer. Went with the tutorial
below and the latest Fusion 1.0.6. I first tried using my current working
MapServer mapfile/environment. That was failing with not loading any tool icons
or map, just blue white boxes. In IE7 I get 'maps is null or
Of
Alan Boudreault
Sent: Thursday, July 10, 2008 1:44 PM
To: mapserver-users@lists.osgeo.org
Subject: Re: [mapserver-users] MapServer + Fusion
Hi Tim
Is your fusion webpage can be accessed via the web ? In this way, i
should take a look to see what's wrong.
Thanks,
Alan
Nolte, Tim wrote
Matthew,
From everything I see this should work. However, something you might try
doing is setup a little JavaScript that tracks the mouse movement (x,y)
within the map area and have those stored in a couple read-only form
fields. When you click on the map and the page is submitted you'll have
39 matches
Mail list logo
