hich it is given.ThanksRegardsS.D.Naik
On Thursday, 27 November 2014 9:36 AM, shrikant naik
wrote:
Hi!You have written VL is the load voltage.But Load voltage will be the same
as bus voltage Vi to which it is connected.Also please inform the longform of
MPSI index and the paper reference in w
Hi!You have written VL is the load voltage.But Load voltage will be the same as
bus voltage Vi to which it is connected.Also please inform the longform of MPSI
index and the paper reference in which it is given.ThanksRegardsS.D.Naik
On Thursday, 27 November 2014 9:36 AM, shrikant naik
wrote:
Hi,VL is load voltage,Yij is branch admittance,Vi is bus voltage.I want to run
continual power flow with various loadings(increasing load) for each bus of a
30-bus system and calculate MPSI in each case through matpower.
On Wednesday, November 26, 2014 6:23 AM, shrikant naik
Dear Sir,I am also studying voltage stability.Please give the details of MPSI
Index.That is its long form,the various terms used in the formula
etc.ThanksShrikant Naik
On Wednesday, 26 November 2014 1:04 AM, Ali Hosseini
wrote:
Dear Matpower Members,
I'm new to matpower and matlab
Dear Dr.Zimmerman,
Please clear my doubts
1)How to obtain Jacobian matrix after performing Loadflow in MATPOWER?
2)For performing CPF,Is the facility of increasing loads on multiple buses
incorporated in MATPOWER?If yes which version?
Thanks
Shrikant Naik
Dear Sir,
I also want to find ATC using CPF.Please forward me the model and code of
finding the same
thanks
s.d.naik
From: loren michael
To: MATPOWER-L@cornell.edu
Sent: Monday, 16 September 2013 1:17 PM
Subject: Enhancement of ATC with FACTS devices using Real
Dear Sir,
I am also interested to know whether multiple load and generation increment is
possible for CPF in MATPOWER?
Thanks
Shrikant Naik
--- On Wed, 19/6/13, Mehran Khosravi wrote:
From: Mehran Khosravi
Subject: CPF for multiple Load and Generator
To: "MATPOWER discussion forum&q
?Please send me the same for IEEE 30 bus system.
Thanks
Shrikant Naik
--- On Tue, 30/4/13, Khirad Dhabhar wrote:
From: Khirad Dhabhar
Subject: P_V curve
To: "MATPOWER discussion forum"
Date: Tuesday, 30 April, 2013, 5:19 PM
Dear all
In my project . Optimal placement of FACTS dev
I am interested in CPF using MATPOWER with load increment at multiple buses.Can
you please send me the MATPOWER code that runs for multiple bus load increment
for CPF?
Thanks
Shrikant
--- On Thu, 16/8/12, Carlos E Murillo-Sanchez
wrote:
From: Carlos E Murillo-Sanchez
Subject: Re: Initial gu
Dear Sir,
Please send me how you have calculated loading limit of buses using voltage
indices criterion.I am also interested to know this.
Thanks
S.D.Naik
--- On Thu, 5/7/12, Parag Patel wrote:
From: Parag Patel
Subject: Re: About MVA limit of branches?
To: "MATPOWER discussion forum"
Date:
Dear Sir,
1) How to run CPF for any bus system?say 30 bus,14 bus,59 bus etc.
2) In MATPOWER cpf_test gives cpf for 30 bus system.In a post you have sent the
test_cpf_14bus for 14 bus system.But it is giving error at line 12 as " wrong
or incomplete ststement".Please clarify.
3) how to present the
Dear Sir,
When i write "test_matpower" in command window I am getting following.
test_matpower
t_loadcase..ok
t_ext2int2ext...ok
t_jacobian..ok
t_hessian...ok
t_totcost...ok
t_modcost...ok
t_hasPQcap..ok
t_mips..ok
t_qps_matpower...
12 matches
Mail list logo