? Good bye ?
TO REMOVE YOUR ADDRESS from this e-list, visit the web site
https://www.list.cornell.edu:9443/u?id=7546080U&n=T&l=matpower-l&o=1342846
Or, create a new empty e-mail message and send it to
leave-1342846-75460...@list.cornell.edu
200
I want to unsubcribe from this mail list.
Can you tell me what to do for that.
Bye
On 3/19/07, shane.steen...@strath.ac.uk wrote:
Hi there,
Quick question regarding wind power and MATPOWER:
Wondering if it would be possible to model the integration of a wind farm of say
100MW using MATPOWER,
is applied,
> the relationship between the P and Q of the wind farm is complex due to the
> control rules.
> Of course, Ray's suggestion is right too.
>
> Wu Jun
> 2007-03-19
>
>
>
> ·¢¼þÈË£º Ray Zimmerman
> ·¢ËÍʱ¼ä£º 2007-03-19 21:45:58
> ÊÕ¼þÈË£º
hi, sorry to bother you again but your advice is very useful and helpful!
I have increased the reactive power at a bus and logged the data into Excel
spreadsheet (attached). I was wondering if you could have a look at the voltage
collapse curve and comment on the authenticity of it -if it's real
The following comment is not really about Matpower but rather wind farm
modelling.
A difficulty that can occur when modelling wind farms is that it is
common for the wind farm controllers to regulate the power factor at the
point of common coupling. Thus if, for example, the wind farm controls
Hi,
I have modelled wind farms in MATPOWER, and as Ray has suggested
below, did use negative values for the active power injection of the
wind farm (i.e. subtracted this from existing load at that bus), but a
positive value of reactive power consumption (i.e. added this to the
existing load Q dema
On Mar 19, 2007, at 4:07 PM, shane.steen...@strath.ac.uk wrote:
Quoting Ray Zimmerman :
On Mar 18, 2007, at 8:11 PM, shane.steen...@strath.ac.uk wrote:
Wondering if it would be possible to model the integration of a
wind farm of say
100MW using MATPOWER, thinking could enter the reactive powe
Quoting Ray Zimmerman :
> On Mar 18, 2007, at 8:11 PM, shane.steen...@strath.ac.uk wrote:
> > Wondering if it would be possible to model the integration of a
> > wind farm of say
> > 100MW using MATPOWER, thinking could enter the reactive power, is
> > this possible?
>
> If you are thinking o
, Ray's suggestion is right too.
Wu Jun
2007-03-19
发件人: Ray Zimmerman
发送时间: 2007-03-19 21:45:58
收件人: MATPOWER discussion forum
抄送:
主题: Re: modelling wind
On Mar 18, 2007, at 8:11 PM, shane.steen...@strath.ac.uk wrote:
> Wondering if it would be possible to model the integration of a
>
On Mar 18, 2007, at 8:11 PM, shane.steen...@strath.ac.uk wrote:
Wondering if it would be possible to model the integration of a
wind farm of say
100MW using MATPOWER, thinking could enter the reactive power, is
this possible?
If you are thinking of modeling it as a specified P and Q injectio
10 matches
Mail list logo