Hi All,
Found this in some other thread in this mailing list.
Please see the following link:
http://forum.meego.com/showpost.php?p=6580&postcount=90
The kickstart file mentioned there is proper
and with the image created using that I am able to get UX on N900
successfully :)
Note: Its armv5 bu
Hi Mifraz,
On Wed, 2010-07-28 at 11:53 +0200, ext Mifraz Marzoon wrote:
> Hi Ameya,
>
> the ks file you shared did work, thanks . was able to build and get a
> console in my N900.
>
> Whats the steps we need to follow to get the UX working on the N900
> build? i thought it was support but not su
Hi Ameya,
the ks file you shared did work, thanks . was able to build and get a
console in my N900.
Whats the steps we need to follow to get the UX working on the N900
build? i thought it was support but not sure how to get it.
Regards,
Mifraz
On Tue, Jul 27, 2010 at 6:32 PM, Ameya Palande wro
Hi Mifraz,
On Tue, 2010-07-27 at 04:40 +0200, ext Mifraz Marzoon wrote:
> Hi Ameya,
>
> ok i did try to bulid the v5 from the original nokia ks file and
> getting the following error while bulding:
>
> Error: failed to create image : Failed to build transaction :
> xorg-x11-drv-fbdev-sgx-0.4.0-2
Hi Ameya,
ok i did try to bulid the v5 from the original nokia ks file and
getting the following error while bulding:
Error: failed to create image : Failed to build transaction :
xorg-x11-drv-fbdev-sgx-0.4.0-2.7.armv5tel requires
ld-linux.so.3(GLIBC_2.4)
xorg-x11-drv-fbdev-sgx-0.4.0-2.7.armv5tel
Hi,
Actually no success with those images which I built using image creator.
Now actually I tried with another prebuilt image downloaded from the
following link:
http://repo.meego.com/MeeGo/builds/1.0.80/handset/images/meego-handset-armv7l-n900/
flashed using cmd:
./flasher-3.5 -l -b -k
meego-h
On Mon, 2010-07-26 at 16:02 +0200, ext Mifraz Marzoon wrote:
> i was able to load the handset UX in my N900 from the day 1 code drop.
>
> i did test the daily build this weekend and no luck. after flashing,
> it only shows the kernel is loading and then it goes dark. restarting
> the phone just bo
i was able to load the handset UX in my N900 from the day 1 code drop.
i did test the daily build this weekend and no luck. after flashing,
it only shows the kernel is loading and then it goes dark. restarting
the phone just boot from the original kernel.
not sure if this is related to the follow
Hi Mifraz,
Were you able to bring up the Handset UX on Nokia N900 device? or just
the terminal?
--
Regards,
Sharavana
___
MeeGo-dev mailing list
MeeGo-dev@meego.com
http://lists.meego.com/listinfo/meego-dev
Hi,
On 21 July 2010 16:28, Carsten Munk wrote:
Do you have the back cover on? If back cover is off, microSD slot is
> inaccessible for the device.
>
Yes, the back cover is on. I've also mounted the microSD on a linux box and
it appears to be in order.
Andrew.
--
asav...@apache.org / cont...@a
2010/7/21 Andrew Savory :
> Hi,
> I've had the same experience ... I built my image using the
> meego-handset-armv7l-n900-nokia-closed-1.0.80.8.20100630.ks
> from http://tablets-dev.nokia.com/meego-codedrop.php using the following
> command:
> sudo mic-image-creator --run-mode=0 --cache=meego-sdbui
Hi,
I've had the same experience ... I built my image using the
meego-handset-armv7l-n900-nokia-closed-1.0.80.8.20100630.ks from
http://tablets-dev.nokia.com/meego-codedrop.php using the following command:
sudo mic-image-creator --run-mode=0 --cache=meego-sdbuild --format=raw
--arch=armv71 --save-
Hi Mifraz,
On Wed, Jul 21, 2010 at 8:02 PM, Mifraz Marzoon wrote:
> I'm not sure if this is necessary but when i change the kick-start
> file, i also cleared the content in the cache folder which is give for
> meego-image creator. i think the script picks the latest version of
> the RPM from ca
I'm not sure if this is necessary but when i change the kick-start
file, i also cleared the content in the cache folder which is give for
meego-image creator. i think the script picks the latest version of
the RPM from cache. so if the cache folder contain previous download
RPM's it'll pick them i
Hi,
are the options which I give to the flasher command proper?
cmd:# ./flasher -l -b -k is what I use
One more thing is, I was able to flash a prebuilt kernel image which had, a
meego image without handset UX
meego-n900-open-armv7l-1.0.0.20100525.1-vmlinuz-2.6.33.3-11.2-n900 was the
image which
Hi Mifraz,
On Wed, Jul 21, 2010 at 7:36 PM, Mifraz Marzoon wrote:
> you did the following?
>
> added the following to rc.local in mmc card before the flash:
> echo 255 > /sys/class/backlight/acx565akm/brightness
>
> to put this in after the image is written to the mmc, connect the N900
> as stor
you did the following?
added the following to rc.local in mmc card before the flash:
echo 255 > /sys/class/backlight/acx565akm/brightness
to put this in after the image is written to the mmc, connect the N900
as storage device and exit it or you can mount it within the N900 to
edit it.
On Wed, J
Hi,
> Can you edit /etc/inittab in your N900 rootfs on mmc card and made
> following change?
> id:5:initdefault: => id:3:initdefault
Tried it but no change.
--
Regards,
Sharavana
___
MeeGo-dev mailing list
MeeGo-dev@meego.com
http://lists.meego.com/
Hi Sharavana,
On Wed, 2010-07-21 at 15:15 +0200, ext Sharavana Ram Kumar Sundaresan
wrote:
> Hi Mifraz,
>
> Even after changing the kickstart repo links and creating the image, I
> dont find any progress.
>
> While booting the screen is dull, but was able to see some log
> messages, after that n
Hi Mifraz,
Even after changing the kickstart repo links and creating the image, I dont
find any progress.
While booting the screen is dull, but was able to see some log messages,
after that no progress just goes off.
Found some messages like,
try e2fsck command
mmcblk0p1 mounting fs with errors
not sure if sharing the kickstart is against any policy, so here what i did:
set:
repo handset to
http://repo.meego.com/MeeGo/builds/trunk/1.0.80.8.20100629.1/core/repos/armv7l/packages/
set repo MeeGo-Trunk
http://repo.meego.com/MeeGo/builds/trunk/1.0.80.8.20100629.1/handset/repos/armv7l/packages
Hi Mifraz,
Tried changing the kickstart file to point to preview link, stil not getting
booted.
Can you share the kickstart file which u used for creating the image?
--
Regards,
Sharavana
___
MeeGo-dev mailing list
MeeGo-dev@meego.com
http://lists.meeg
Hi Sharavana,
Seems your case is similar to mine. look the following:
http://forum.meego.com/showthread.php?p=5828
as mention in the reply of the thread i tried modifying the kickstart
file to point to Day One code drop. and it worked. seems something is
wrong in the daily build for N900 UX.
Thx
Hi,
I have created meego kernel image and tried to flash it into n900 device
using sdcard following the guidelines given in the following links
http://wiki.meego.com/ARM/N900/Install/MMC
http://wiki.maemo.org/Flasher#Flasher-3.5_usage_examples
But after i run the flasher command, meego is not b
24 matches
Mail list logo
