That's very helpful Peter. Thanks.
Karl
On Wed, Jul 4, 2018 at 11:20 AM Peter Frederick via Mercedes <
mercedes@okiebenz.com> wrote:
> I don't think you need one. Support spring link with a jack while the car
> is up on jackstands or on a life, unbolt lower shock absorber mount and
> spring
Hey Randy,
Larry's in Va - near Petersburg and Richmond.
On 07/04/2018 11:37 AM, Randy Bennell via Mercedes wrote:
So, where is Larry?
Any of you folks close enough to go and give him a bit of help?
RB
On 04/07/2018 8:23 AM, Larry Turner via Mercedes wrote:
Curley McLain wrote:
The axle
Hi Peter,
If I can get the carrier off, a shop should be able to press the old one
out and a new one in right? Gotcha, I will get a Spring Link if I get
that far...
Thanks for all the help..
LarryT
On 07/04/2018 9:57 AM, Peter Frederick via Mercedes wrote:
Take the wheel carrier off
I don't think you need one. Support spring link with a jack while the car is
up on jackstands or on a life, unbolt lower shock absorber mount and spring
link bearing in the wheel carrier, lower spring link. Spring will completely
un-compress and can be removed by hand. If you want to use a
Peter what is the recommended spring compressor to avoid death while doing
rear suspension work on a 124? I bought a set of those urethane bushings
from Poland so I plan to redo quite a bit of stuff. Thanks.
On Wed, Jul 4, 2018 at 6:57 AM Peter Frederick via Mercedes <
mercedes@okiebenz.com>
So, where is Larry?
Any of you folks close enough to go and give him a bit of help?
RB
On 04/07/2018 8:23 AM, Larry Turner via Mercedes wrote:
Curley McLain wrote:
The axle brg. is not that hard. take off the wheel carrier, take it
and the bearing to a good alignment or general repair shop
Take the wheel carrier off and use a press. I've never been able to get the
hub out with a slide hammer, and I've screwed with these since about 1980. The
bearing is usually rusted in well enough you have to use a press to get that
out too.
Replace the bearing for the spring link while you
What happened? Did you break your arm trying to get some money out of your
wallet?
--R
Sent from iPhone
> On Jul 4, 2018, at 9:23 AM, Larry Turner via Mercedes
> wrote:
>
> Hi Gang! (I'm bck!)
>
> I am a little more mobile now having moved from a wheel chair to a walker and
> some
One more thing, I looked at the Pelican Description of removing the
wheel bearing and they talk about the rear hub being a bear to remove.
Is that the case? They suggest a slide hammer. I was hoping for
something I could unbolt. Not possible?
Thanks,
LarryT
On 07/04/2018 9:23 AM,
Curley McLain wrote:
The axle brg. is not that hard. take off the wheel carrier, take it and
the bearing to a good alignment or general repair shop and have them
press out the old, and push in the new...
Hi Gang! (I'm bck!)
I am a little more mobile now having moved from a wheel chair
This is about 20 minutes away from me
Check out what I found on Facebook Marketplace.
https://www.facebook.com/marketplace/item/184538185576777
Sent from my iPhone
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To
Hahahahaha
Sent from my iPhone
> On Jul 4, 2018, at 5:27 AM, M. Mitchell Marmel via Mercedes
> wrote:
>
> (insert unkind joke about the granite stretch 123 being almost as fast as
> the real thing here) ;-)
>
> -MMM-
>
> On Tue, Jul 3, 2018 at 11:31 PM, archer75--- via Mercedes <
>
I hate aftermarket radios
Sent from my iPhone
> On Jul 4, 2018, at 5:16 AM, M. Mitchell Marmel via Mercedes
> wrote:
>
> Or do like me, put in a $40 Dual mech-less head unit with the SD, USB and
> aux inputs right there on the dashboard... :D
>
> -MMM-
>
> On Tue, Jul 3, 2018 at 11:31 PM,
(insert unkind joke about the granite stretch 123 being almost as fast as
the real thing here) ;-)
-MMM-
On Tue, Jul 3, 2018 at 11:31 PM, archer75--- via Mercedes <
mercedes@okiebenz.com> wrote:
>
> The Mercedes Benz Tombstone
>
> A Stylish Ride to the Other Side
>
> Located in the peaceful
Or do like me, put in a $40 Dual mech-less head unit with the SD, USB and
aux inputs right there on the dashboard... :D
-MMM-
On Tue, Jul 3, 2018 at 11:31 PM, Buggered Benzmail via Mercedes <
mercedes@okiebenz.com> wrote:
> IT CAN NOT WORKABLE WITH ALL BUT PART OF YEAR AND PART OF MODEL
>
>
15 matches
Mail list logo