Looks interesting. That might work.
--FT
Sent from iFōn
> On Jul 16, 2023, at 9:19 PM, mitch--- via Mercedes
> wrote:
>
>
> Would a 1/4" flex head hex bit ratchet help?
> It's a foot long, so you need a lot of clearance in some direction.
> Once you find the right angle, the flex angle
Would a 1/4" flex head hex bit ratchet help?
It's a foot long, so you need a lot of clearance in some direction.
Once you find the right angle, the flex angle locks to hold its shape.
https://www.amazon.com/GEARWRENCH-SLIM-HEAD-RATCHET-81030/dp/B078Z3FNX7
Your gain his loss!
--FT
Sent from iFōn
> On Jul 16, 2023, at 8:11 PM, Kaleb Striplin via Mercedes
> wrote:
>
> The GL I have with no title most likely needs this; I put it on Fakebook and
> some guy can by and bought it yesterday, so I don’t have to screw with it.
> Perhaps this job would
The GL I have with no title most likely needs this; I put it on Fakebook and
some guy can by and bought it yesterday, so I don’t have to screw with it.
Perhaps this job would be slightly easier on a lift; but still appears to be a
pain in the ass.
Sent from my iPhone
> On Jul 16, 2023, at
Strong work!
-D
From: Mercedes on behalf of Buggered Benzmail
via Mercedes
Sent: Sunday, July 16, 2023 7:31 PM
To: Mercedes List
Cc: Buggered Benzmail
Subject: [MBZ] Benzing Today — ML63 ISM Massive Pain in the Ass
I decided to take the ISM (Integrated Servo
I decided to take the ISM (Integrated Servo Module, an electric servo motor
that a coded electronic controller causes to shift the tranny) off the ML63
this afternoon so I can see about getting it cloned to another one I pulled off
the ML350 I knackered.
There is a cover shield with 4 little
