Ok, i gave it a go, and no go. Jumpered the wires, nothing. Am getting
12 volts to the relay. So, I assume either the wire to the compressor
is bad or the compressor is bad. On the compressor end, which of the
wires would you apply power to to see if the compressor kicks on from there?
Jim
The one that doesn't read zero ohms to ground ---
On Mon, Jun 16, 2008 at 4:42 PM, Kaleb C. Striplin [EMAIL PROTECTED] wrote:
Ok, i gave it a go, and no go. Jumpered the wires, nothing. Am getting
12 volts to the relay. So, I assume either the wire to the compressor
is bad or the compressor
, 16 Jun 2008 2:42 pm
Subject: Re: [MBZ] 190D klima
Ok, i gave it a go, and no go. Jumpered the wires, nothing. Am getting 12
volts to the relay. So, I assume either the wire to the compressor is bad or
the compressor is bad. On the compressor end, which of the wires would you
Ok, i gave it a go, and no go. Jumpered the wires, nothing. Am
getting
12 volts to the relay. So, I assume either the wire to the compressor
is bad or the compressor is bad. On the compressor end, which of the
wires would you apply power to to see if the compressor kicks on from
there?
Trying to get the AC going on my 190D. Compressor not kicking in.
Which
2 pins are you supposed to jumper on the klima relay to see if the
compressor kicks in? Have done all this on a 126, but dont have the
201
info.
Our 190D uses exactly the same Klima as our SDL. So that should
make
thanks, will give it a go
Jim Cathey wrote:
Trying to get the AC going on my 190D. Compressor not kicking in.
Which
2 pins are you supposed to jumper on the klima relay to see if the
compressor kicks in? Have done all this on a 126, but dont have the
201
info.
Our 190D uses exactly
Trying to get the AC going on my 190D. Compressor not kicking in. Which
2 pins are you supposed to jumper on the klima relay to see if the
compressor kicks in? Have done all this on a 126, but dont have the 201
info.
--
Kaleb C. Striplin/Claremore, OK
94 E420, 92 300SD, 92 300E 4Matic, 91
