sounds like great day of accomplishments

On Sat, Mar 11, 2023, 9:32 PM dan penoff.com via Mercedes <
mercedes@okiebenz.com> wrote:

> Pretty good day today. Tried running a DAS scan and the battery puked. Not
> sure why, but after I got a new battery charger I was able to run a scan.
> There were codes in nearly every section. After I cleared all the codes and
> ran an new scan, this was the result:
>
> [2001 CL600 DAS scan - 1.jpg]
>
> Note that the SAM and AC bangs were informational, no codes. There is an
> issue with power to the left door, which I knew. Not sure if there is a
> wiring issue or if the fuses the PO was messing around with might be the
> problem.
>
> The COMAND was not happy, so I dug into that. Turns out PO or his mechanic
> messed up the D2B (fiber optic) loop for the components. They swapped the
> connections between the amp and the CD changer, I think. Regardless, the
> only reason it was unhappy was because the map didn’t match the
> configuration. I’ll fix that tomorrow.
>
> Got the trunk lid liner cleaned and back in place after anchoring all of
> the wires thevPO had pulled off the clips. Got the remains of the two
> remaining air cleaner mounts out of their mounts with left hand drill bits
> and some Kroil. Those things were really stuck!
>
> Replaced a broken hood release handle. The headlights definitely have wire
> insulation issues, but look OK for now.
>
> All of the belly pans appear to be present. I degreased and pressure
> washed them for installation tomorrow.
>
> Had a couple of setbacks today. My shop vac, despite sucking when I
> covered the hose, must have a clogged filter. It’s done, so I ordered a new
> filter for delivery in the morning. My Dad’s old Craftsman/Schumacher
> charger finally passed on after 50 years. Guess we got our money’s worth
> out of that. Bought a HF one that conditions batteries, which it is doing
> right now.
>
> Tomorrow I’m hoping to get some washing/detailing done. I haven’t been
> following any particular direction, I’m just sort of doing things as I
> please. I need to get it in the air to get the belly pans on, but to do
> that I’ve got to bleed my MityJacks, as I had a leaking fitting that they
> replaced so now there’s a hose that’s empty.
>
> It never ends, but progress, none the less!
>
> -D
> _______________________________________
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to