I think they all made it " weirder in the same way" very subjective. This 
was done on a warmed up engine.
I ordered a set of mounts motor and tranny , engine shocks and installation 
kits for the shocks. The shocks look original and the rubber mounts for the 
shock are dried and cracked. The engine mounts have been there for a while 
(corrosion on bolts) but don't look all that nasty. I think the Trany mount 
was service by the previous owner (hard ware looks more recent) but it is 
not all that expensive and this way I will know its age.

I now believe that the replacement injectors do make it run a bit stronger. 
It is responsive and accerallates as good as is has ever as far as my 
experience with it.


George Larribeau
Dallas Texas




----- Original Message ----- 
From: "John Robbins" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" <mercedes@okiebenz.com>
Sent: Tuesday, September 18, 2007 8:42 AM
Subject: Re: [MBZ] Fw: ReplacingInjectors(was 
Re:1985300SDNastyEngineVibration)


> George Larribeau wrote:
>> I tried unloosening each injector pipe and each one makes it run weirder 
>> but
>> don't know what is up.
>
> What matters is that they all make it run weirder in the same way.  If
> one changes the idle less than the others is when you have an
> injection/compression/etc problem.  If they all changed the same then
> just get the new motor mounts in there.  They aren't very expensive, and
> are most likely bad anyway.
>
> John
>
>
> _______________________________________
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
> 



_______________________________________
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to