Re: [MBZ] Houston, we have some problems...

2019-09-10 Thread fmiser via Mercedes
> Grant wrote: > Also, question what the water soluble oil does to freeze point > of water. another question that needs answer. It will depress it - but I'll bet not nearly as much as the glycols. And the oil probably doesn't raise the boiling point very much either. ___

Re: [MBZ] Houston, we have some problems...

2019-09-10 Thread G Mann via Mercedes
Craig, Good question, and one I do not presently have the answer to. I'll en devour to make a stop at the shop in next few days and ask that question. Also, question what the water soluble oil does to freeze point of water. another question that needs answer. On Tue, Sep 10, 2019 at 5:45 PM Craig

Re: [MBZ] Houston, we have some problems...

2019-09-10 Thread Craig via Mercedes
On Tue, 10 Sep 2019 09:23:42 -0700 G Mann via Mercedes wrote: > Had a radiator shop owner tell me to run straight distilled water with > water soluble oil [machine cutting fluid oil, like is used in CNC > machines.] instead of water / antifreeze mix. His claim is, internal > corrosion and block r

Re: [MBZ] Houston, we have some problems...

2019-09-10 Thread Max Dillon via Mercedes
Would be fine in a warm climate where below freezing temps are not a possibility. -- Max Dillon Charleston SC On September 10, 2019 12:23:42 PM EDT, G Mann via Mercedes wrote: >Had a radiator shop owner tell me to run straight distilled water with >water soluble oil [machine cutting fluid oil,

Re: [MBZ] Houston, we have some problems...

2019-09-10 Thread G Mann via Mercedes
Had a radiator shop owner tell me to run straight distilled water with water soluble oil [machine cutting fluid oil, like is used in CNC machines.] instead of water / antifreeze mix. His claim is, internal corrosion and block rust doesn't happen using that cutting oil/ water mix, and straight water

Re: [MBZ] Houston, we have some problems...

2019-09-10 Thread Karl Wittnebel via Mercedes
Water is fine but your overflow tank will turn orange after a bit. Prob check the compression to be sure the head isnt too warped and the gasket is ok. On Mon, Sep 9, 2019, 9:28 PM Max Dillon via Mercedes wrote: > I had a water pump promptly die in a 123 car, when I ran it for a few days > wi

Re: [MBZ] Houston, we have some problems...

2019-09-09 Thread Max Dillon via Mercedes
I had a water pump promptly die in a 123 car, when I ran it for a few days with water. Don't know if there pump died from water (lack of lubrication?) or if it was simply time for the pump to die. -- Max Dillon Charleston SC On September 10, 2019 12:06:02 AM EDT, Curley McLain via Mercedes w

Re: [MBZ] Houston, we have some problems...

2019-09-09 Thread Curley McLain via Mercedes
On a strange car, I usually put in water if weather permits.  Then run it enough to be comfortable, or until the weather dictates it is time for antifreeze. Kevin Kraly via Mercedes wrote on 9/9/19 8:07 PM: With this 1982 240D. I was feeling around under the hood and discovered that there is

[MBZ] Houston, we have some problems...

2019-09-09 Thread Kevin Kraly via Mercedes
With this 1982 240D. I was feeling around under the hood and discovered that there is no AC compressor which isn’t the worst of it. THERE IS NO COOLANT WHATSOEVER IN THE RADIATOR! I know that most of these are neglected, but who knows how long it’s been running dry. I really don’t want to th