Re: [MBZ] How to identify a tranny model

2007-09-17 Thread Rusty Cullens
Give me the VIN and I can tell you the entire transmission number. Rusty Cullens BuyMBparts, Inc. Tel 1-800-741-5252 Fax 770-454-9745 - Original Message - From: [EMAIL PROTECTED] To: mercedes@okiebenz.com Sent: Saturday, September 15, 2007 10:25 AM Subject: [MBZ] How to identify

[MBZ] How to identify a tranny model

2007-09-15 Thread rw123
Does anyone know whether a part number identifying an MB tranny as 722.xxx is actually stamped on the transmission. If not, how does one identify what type of transmission one has. Do I have to cross reference other part numbers from the housing, etc. I've been hunting the salvage yards and

Re: [MBZ] How to identify a tranny model

2007-09-15 Thread tom savage
[EMAIL PROTECTED] wrote: Does anyone know whether a part number identifying an MB tranny as 722.xxx is actually stamped on the transmission. If not, how does one identify what type of transmission one has. Do I have to cross reference other part numbers from the housing, etc. I've been

Re: [MBZ] How to identify a tranny model

2007-09-15 Thread rw123
r side of the case, just above the pan. There's also an application guide at http://peterschmid.com/ under Application Guide. Also, the EPC datacard and http://www.mbclub.ru/mb/vin/?lng=eng will usually tell you the full tranny number for a particular VIN so you can tell if it has

Re: [MBZ] How to identify a tranny model

2007-09-15 Thread Kaleb C. Striplin
Its on a little flat spot i believe right above the pan on the front passenger side front [EMAIL PROTECTED] wrote: Does anyone know whether a part number identifying an MB tranny as 722.xxx is actually stamped on the transmission. If not, how does one identify what type of transmission

Re: [MBZ] How to identify a tranny model

2007-09-15 Thread LWB250
On later models like 123 and later it is. I seem to recall earlier models like 108s and 114s having it stamped in the right rear corner of the housing, just above the pan... Dan --- Kaleb C. Striplin [EMAIL PROTECTED] wrote: Its on a little flat spot i believe right above the pan on the