So this morning when it was cool cruise did not hold. On the way home with
temps around 90 it worked. I am getting ready to hit all the points with the
iron.
Sent from my iPhone
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/arc
So long as you de-varnished it first, and are careful, that should do it.
-- Jim
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mer
Jim Cathey wrote:
> So long as you de-varnished it first, and are careful, that should do it.
> -- Jim
> ___
This is what I found about removing the "conformal coating".
"If the "varnish" is an acrylic, lacquer thinner will remove it. If it is
varnish or poly
Looks like varnish to me. I have a gallon can of "Methylene Chloride Free"
paint stripper that I've used for all of the ones I've repaired. Works
great, but you must be careful to keep it only on the circuit side of the
board. I then rinse off the board under running water using a small scrub
br
-- Jim wrote:
> So long as you de-varnished it first, and are careful, that should do it.
Is it possible to grind lightly with dremel? Then bit of solder.
tin.tin
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubsc
>
> Is it possible to grind lightly with Dremel? Then bit of solder.
Probably, but talk about error-prone! One divot and now you
have a _real_ problem. Or you could probably sandblast, or
wire brush...
The leads are tinned iron, so if you dig through the tin then you have
something that is di
