And frightens away any snakes, too?
-D
> On Nov 26, 2023, at 7:06 PM, M. Mitchell Marmel via Mercedes
> wrote:
>
> On the other hand, the hissing helps drown out any tinnitus one has.
> ___
> http://www.okiebenz.com
>
> To search list archives
On the other hand, the hissing helps drown out any tinnitus one has.
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
Built in leaks that you can chase for the rest of your life, or until you burn
the shop down. Terrific idea. /sarcasm...
-Curt
On Thursday, November 23, 2023 at 11:37:45 PM EST, Kaleb Striplin via Mercedes
wrote:
Instead of a kit I think I’m going to use pex and shark bit fittings
Pex-Al-Pex is what the air line kit I bought uses. I think the fittings were
special. I don't think that something that can explode and send srapnel in the
shop is a place to save mmoney, though I did shop for the least expensive
solution.
On Friday, November 24th, 2023 at 5:37 PM, dan
Typo. 1/2” (one half inch).
-D
> On Nov 24, 2023, at 6:52 PM, Craig via Mercedes wrote:
>
> On Fri, 24 Nov 2023 23:37:43 + "dan penoff.com via Mercedes"
> wrote:
>
>> 300’ of 12” PEX-AL-PEX looks to be around $140, which doesn’t seem that
>> expensive compared to other materials, like
On Fri, 24 Nov 2023 23:37:43 + "dan penoff.com via Mercedes"
wrote:
> 300’ of 12” PEX-AL-PEX looks to be around $140, which doesn’t seem that
> expensive compared to other materials, like copper or iron pipe.
12" ??
Craig
___
http://www.okiebenz.com
I just did some cursory searching, and the general consensus seems to be that
while you can use PEX for air lines, it’s not considered ideal for a number of
reasons, most of which seem to focus on permeability and burst pressure.
What many of the articles do suggest, however, is to consider
Yea I think you are right, it will be much cheaper using regular pex
fittings and buying the crimp tool and rings off amazon.
On 11/24/2023 12:55 PM, dan penoff.com via Mercedes wrote:
I would tend to believe it would be cost-prohibitive as well to use SharkBite
fittings. They seem to average
I would tend to believe it would be cost-prohibitive as well to use SharkBite
fittings. They seem to average about $10-$20/each, depending on the type of
fitting or valve. That could get real expensive, really quick. It’s got to be
cheaper and easier to just spec out what you need or buy a kit
3/4″ Fastpipe 230FT Master Kitrapidairproducts.comKaleb, have you looked at Rapid Air? I asked my engineer son-in-law what he would use and he recommended this company. They have various kits or you can use the site to build your own system. Michael E. EshOn Nov 24, 2023, at 12:18 PM, Randy
And, shark bite fittings tend to be expensive. I think I would use PEX
fittings and the crimp rings. You will need the crimp tool as well as
the cutter for removing rings when you mess up or decide to change
something.
I have not used them for air but I probably should install a line in my
Good luck with that - in my experience, shark bite fittings don't reliably hold
60psi water, much less 100+ psi of air though I've never tried it.
On Thursday, November 23rd, 2023 at 10:37 PM, Kaleb Striplin via Mercedes
wrote:
>
>
> Instead of a kit I think I’m going to use pex and
Instead of a kit I think I’m going to use pex and shark bit fittings along with
ball valves I already have. It appears this will be cheaper.
Sent from my iPhone
> On Nov 23, 2023, at 8:38 PM, Kaleb Striplin wrote:
>
> Yea well I’m finally getting around to it, maybe.
>
> Sent from my
Yea well I’m finally getting around to it, maybe.
Sent from my iPhone
> On Nov 23, 2023, at 8:30 PM, MB list etc via Mercedes
> wrote:
>
> The kit - I sent you a link to it last time you asked about air lines for
> your shop
>
>
>
>
>> On Thursday, November 23rd, 2023 at 8:24 PM,
The kit - I sent you a link to it last time you asked about air lines for your
shop
On Thursday, November 23rd, 2023 at 8:24 PM, Kaleb Striplin via Mercedes
wrote:
>
>
> What lines did you use? Iron pipe or one of those kits?
>
> Sent from my iPhone
>
> > On Nov 23, 2023, at 8:14
What lines did you use? Iron pipe or one of those kits?
Sent from my iPhone
> On Nov 23, 2023, at 8:14 PM, MB list etc via Mercedes
> wrote:
>
> Your tools use volume of air, not just pressure - I went with the 3/4 inch
> lines.
>
>
>
>
>> On Wednesday, November 22nd, 2023 at 11:15 PM,
Your tools use volume of air, not just pressure - I went with the 3/4 inch
lines.
On Wednesday, November 22nd, 2023 at 11:15 PM, Kaleb Striplin via Mercedes
wrote:
>
>
> I am getting ready to install air lines in the shop. Tired of having
> hoses strung all over the place. Probably
Most of these kits have drain valves in the bottom of each drop/outlet
Sent from my iPhone
> On Nov 23, 2023, at 11:41 AM, Frederick Moir via Mercedes
> wrote:
>
> Kaleb.
> From my wet learning experience:-
> If you use drops to each air connection , build in a water drain that you
> can
Craig, et al.
My boss got sprayed and didn't like it. Had to refit drain(s).
This despite having a water separator and dryer.
Fred.
On Thu, Nov 23, 2023 at 1:02 PM Craig via Mercedes
wrote:
> On Thu, 23 Nov 2023 12:40:44 -0500 Frederick Moir via Mercedes
> wrote:
>
> > Kaleb.
> > From my wet
On Thu, 23 Nov 2023 12:40:44 -0500 Frederick Moir via Mercedes
wrote:
> Kaleb.
> From my wet learning experience:-
> If you use drops to each air connection , build in a water drain that
> you can daily let out the liquid surprises before they occur.
> BTDT. Felt like an idiot.
> Fred.
If you
Kaleb.
From my wet learning experience:-
If you use drops to each air connection , build in a water drain that you
can daily let out the liquid surprises before they occur.
BTDT. Felt like an idiot.
Fred.
On Thu, Nov 23, 2023 at 11:48 AM Randy Bennell via Mercedes <
mercedes@okiebenz.com> wrote:
Have you considered using PEX?
Randy
On 22/11/2023 11:15 PM, Kaleb Striplin via Mercedes wrote:
I am getting ready to install air lines in the shop. Tired of having
hoses strung all over the place. Probably going to get a couple of
those flex tubing kits. I will be running up to 3/4"
Yep
Sent from my iPhone
> On Nov 23, 2023, at 12:15 AM, G Mann via Mercedes
> wrote:
>
> Regardless of pipe size, ALWAYS install a shut off ball valve inline coming
> OUT of the compressor tank, and ALWAYS close that valve, along with opening
> the main off switch to your compressor.
> Every
Regardless of pipe size, ALWAYS install a shut off ball valve inline coming
OUT of the compressor tank, and ALWAYS close that valve, along with opening
the main off switch to your compressor.
Every time you leave the shop for longer than to take lunch.
Air leak = air compressor running =
I am getting ready to install air lines in the shop. Tired of having
hoses strung all over the place. Probably going to get a couple of
those flex tubing kits. I will be running up to 3/4" inpact, my tire
machine, tire air hoses etc. My initial thought it I will have at least
4 outlets at
I wonder about PEX? It is more flexible and less brittle than PVC or ABS.
Randy
On 25/10/2021 11:19 AM, Michael Esh via Mercedes wrote:
https://blog.exair.com/2019/05/01/is-pvc-pipe-alright-to-use-with-compressed-air/
Good info on this site with contact info at the to discuss your project.
https://blog.exair.com/2019/05/01/is-pvc-pipe-alright-to-use-with-compressed-air/
Good info on this site with contact info at the to discuss your project.
Is PVC Pipe Alright to Use with Compressed Air?
PUBLISHED ON May 1, 2019 by Brian Farno
A question arises every now and then on whether or
> always use a mount clamp at each quick disconnect to reduce strain when you
> yank on the hose
Consider an el-stupido move like catching a hose on the bumper of a car you're
backing out.
You don't want your entire air system to go out the door too, dragging your
compressor on
its side out
> >>>>>Original Message
> >>>>>
> >>>>> Show Details
> >>>>> From: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>
> >>>>> Se
k Don installed this in his hangar with some additional outlets and
> >>> stuff. Pricy, but it won't fail.
> >>>>>
> >>>>> Rick
> >>>>>
> >>>>>
> >>>>
Because the galvanized coating can flake off and end up in your tools.
Rick
From: mercedes@okiebenz.com
Sent: October 24, 2021 9:03 PM
To: mercedes@okiebenz.com
Reply-to: mercedes@okiebenz.com
Cc: ka...@striplin.net
Subject: Re: [MBZ] Shop air
Supposedly galvanized is not recommended, not sure
You could cheap out and use PEX and black iron or copper. You will have to
invest in the tools for PEX tubing though.
https://youtu.be/40kHcnGjw78
This young fellow used copper. At the present time, it would be too much money.
https://youtu.be/GCLNbb-n_PQ
Another couple votes for PEX.
@okiebenz.com<mailto:okiet...@okiebenz.com>;
davesl...@okiebenz.com<mailto:davesl...@okiebenz.com>
Reply-to: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>
Cc: ka...@striplin.net<mailto:ka...@striplin.net>
Subject: [MBZ] Shop air
There was some discussion a while bac
>>>
> >>>>>
> >>>>>Original Message
> >>>>>
> >>>>> Show Details
> >>>>> From: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com&
;
davesl...@okiebenz.com<mailto:davesl...@okiebenz.com>
Reply-to: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>
Cc: ka...@striplin.net<mailto:ka...@striplin.net>
Subject: [MBZ] Shop air
There was some discussion a while back on one of these lists about shop
air lines. Somebody had bo
tional outlets and
> >> stuff. Pricy, but it won't fail.
> >>>>
> >>>>
> >>>> Rick
> >>>>
> >>>>
> >>>> Original Message
> >>>&g
__
> >>>> Original Message
> >>>> ________
> >>>> Show Details
> >>>> From: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>
> >>>> Sent: October 24, 2021 4:54 PM
> >
@okiebenz.com<mailto:mercedes@okiebenz.com>
>>>> Sent: October 24, 2021 4:54 PM
>>>> To: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>;
>> okiet...@okiebenz.com<mailto:okiet...@okiebenz.com>;
>> davesl...@okiebenz
nz.com>
> > > Sent: October 24, 2021 4:54 PM
> > > To: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>;
> okiet...@okiebenz.com<mailto:okiet...@okiebenz.com>;
> davesl...@okiebenz.com<mailto:davesl...@okiebenz.com>
> > > Reply-to: mercedes@okieb
: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>;
> > okiet...@okiebenz.com<mailto:okiet...@okiebenz.com>;
> > davesl...@okiebenz.com<mailto:davesl...@okiebenz.com>
> > Reply-to: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>
> > Cc: ka...@striplin.
.com>;
okiet...@okiebenz.com<mailto:okiet...@okiebenz.com>;
davesl...@okiebenz.com<mailto:davesl...@okiebenz.com>
Reply-to: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>
Cc: ka...@striplin.net<mailto:ka...@striplin.net>
Subject: [MBZ] Shop air
There was some discussion
21 4:54 PM
To: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>;
okiet...@okiebenz.com<mailto:okiet...@okiebenz.com>;
davesl...@okiebenz.com<mailto:davesl...@okiebenz.com>
Reply-to: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>
Cc: ka...@striplin.net<mailto:ka...@
That was me, and this is what I bought - a 100 ft. kit, then lots of
additional fittings, regulators, etc.
https://www.amazon.com/gp/product/B005FKYRTU/ref=asin_title?ie=UTF8=1
https://www.rapidairproducts.com/rapidair-home-garage
On Sun, Oct 24, 2021 at 4:54 PM Kaleb Striplin via Mercedes <
There was some discussion a while back on one of these lists about shop
air lines. Somebody had bought some kits off amazon that include line,
valves, etc. Ring any bells? Can somebody refresh my memory on these?
___
http://www.okiebenz.com
To search
44 matches
Mail list logo