Yeah that is a good idea.
Allan
On Wed, Aug 4, 2021, at 10:24 PM, Peter Frederick via Mercedes wrote:
> Either the KD Tools is mis-marked or it's gorssy inaccurate. 0.15mm is
> 0.005905", so 0.006 is a s close as you are going to get with hand tools.
>
> Might want to check a couple more "leav
Either the KD Tools is mis-marked or it's gorssy inaccurate. 0.15mm is
0.005905", so 0.006 is a s close as you are going to get with hand tools.
Might want to check a couple more "leaves" on the KD Tools set, if they are out
too throw it out. Decent feeler gauges aren't that expensive and ones
Was checking valve clearances on the Karmann Ghia tonight. Spec is .006" or
.15mm.
I have two sets of feeler gauges. One is metric, Craftsman brand, that I've had
since the 1980s.
The other is in thousandths, KD Tools brand, picked up at a parts shop probably
at least 15-20 years ago.
I notic
