When using package_ipk with the fsl-image-test in 3.10.17_1.0.0_ga I get
the following error at the fsl-image-test do_rootfs:
Collected errors:
| * check_data_file_clashes: Package udev-extraconf wants to install file
/home/allanmatthew/fsl-release-bsp/build/tmp/work/imx6solo_3dr-poky-linux-gnuea
Hello Bob,
You are right. Here is the patch:
--- a/recipes-bsp/tcf-qoriqdbg/tcf-qoriqdbg_4.0.0.105390.bb
+++ b/recipes-bsp/tcf-qoriqdbg/tcf-qoriqdbg_4.0.0.105390.bb
@@ -11,6 +11,13 @@ SRC_URI = "file://${BPN}-${PV}.tar.bz2 \
SRC_URI[md5sum] = "f11b99b489030d9f35573e91c4404e03"
SRC_URI[sha256sum
Hi,
Just a clarification.Since I don't have freescale reference board, Could you
please confirm segmentation fault with qtdemoE does/doesn't occurs with sabre
boards.
Thanks & Best Regards,Redwan A M | Senior Software EngineerZumi Solutions (P)
Ltd.,#956, 16th Main Road, BTM 2nd Stage,Bangalore
Hi all,
Following is the proposal for FSL QorIQ SDK upstream, comment is welcome.
Upstream Plan
• SDK 1.6 recipe upstream (Done)
− http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/
• Optimize the recipes in meta-fsl-ppc (Done)
• Resolve the PPC and ARM layer compatibility issue (31-Jul)
Hi
lia...@ava.com.cn
Best Regards
--
Lian jianfei
5F, No.15, Ke Hui 2nd Street, Ke Hui Development Centre Science Avenue, Science
City, Luo Gang District Guangzhou, China 510663
TEL: 15989094327
Email: lia...@ava.com.cn
--
___
m
This updates the FSL Community's U-Boot fork to a 2014.07-based
release.
Along with the recipe revision changes, this modifies the default
kernel image to "zImage" as most machines maintained in meta-fsl-arm
now uses it.
The machines that are still using uImage are:
- imx31pdk
- imx35pdk
- im
This includes following updates:
b3912bb ENGR00285448 [MX28] SAIF: Out of Voltage in SAIF clock PINs
90ce77d ENGR00285446-3 [MX28] SAIF: Bit Shift in SAIF RX Data
1ea685a ENGR00285446-2 [MX28] SAIF: Bit Shift in SAIF RX Data
1ca8992 ENGR00285446-1 [MX28] SAIF: Bit Shift in SAIF RX Data
45fe172 mac
On 07/15/2014 01:53 PM, John Weber wrote:
> Actually, Eric, the change for the broadcom-nvram-config does require
> your attention because of the need to rename nvram.txt to
> brcmfmac4330-sdio.txt.
>
Okay. It's likely to take me until the end of the week to
test things out.
--
___
On Tue, Jul 15, 2014 at 3:21 PM, Bob Cochran wrote:
> I worked around it by changing inherit autotools to inherit
> autotools-brokensep.
>
> However, perhaps this recipe should be written as a makefile only recipe
> (not inherit autotools) since there is no autoconf support / configure
> script in
Actually, Eric, the change for the broadcom-nvram-config does require your
attention because of the need to rename nvram.txt to brcmfmac4330-sdio.txt.
On Tue, Jul 15, 2014 at 3:50 PM, Eric Nelson <
eric.nel...@boundarydevices.com> wrote:
> Hi John,
>
> On 07/15/2014 01:01 PM, John Weber wrote:
>
Hi John,
On 07/15/2014 01:01 PM, John Weber wrote:
> Upstream changes to the brcmfmac driver require a change to the firmware
> file names to match the devid and interface type of the Broadcom chipset.
> This also makes it easier for one machine to support multiple chipets in
> Yocto.
>
> Signed-
The update to the Wandboard Linux kernel includes the following changes:
- wandboard_defconfig: Enable CONFIG_USB_OTG
- wandboard/dts: Fix USB OTG
- wand-rfkill: Change gpio depending on wandboard revision
- wandboard: dts: Add alternate pin support for rev C1
- brcmfmac: Use fw filename and nvram
Upstream changes to the brcmfmac driver require a change to the firmware
file names to match the devid and interface type of the Broadcom chipset.
This also makes it easier for one machine to support multiple chipets in
Yocto.
Signed-off-by: John Weber
---
.../linux-firmware/linux-firmware_git.b
Upstream driver changes cause the driver to request firmware based on
the device ID (e.g. 4329, 4330). This also applies to the nvram config
file. Restructure the recipes and separate by chipset.
Modify conf/machine to use chipset-specific broadcom nvram packages
Signed-off-by: John Weber
---
On Mon, Jul 14, 2014 at 8:53 AM, jags gediya wrote:
> Exception: OSError: [Errno 13] Permission denied
>
> ERROR: Function failed: do_rootfs
> ERROR: Logfile of failure stored in:
> /home/jags/Projects/asai_iotg/asai_iotg/src/build/tmp/work/imx6slevk-poky-linux-gnueabi/core-image-minimal/1.0-r0/te
I worked around it by changing inherit autotools to inherit
autotools-brokensep.
However, perhaps this recipe should be written as a makefile only recipe
(not inherit autotools) since there is no autoconf support / configure
script in the archive.
--
__
Hello,
On Tue, Jul 15, 2014 at 5:34 AM, dexon_test wrote:
> First of all, I am a full beginner when it comes to bitbake, atmel,
> etc...So, I am sorry if my questions seems stupid, but this one I just can
> not seem to figure out on my own.
>
> I would like to use meta-atmel (https://github.com/l
Hi all,
First of all, I am a full beginner when it comes to bitbake, atmel,
etc...So, I am sorry if my questions seems stupid, but this one I just
can not seem to figure out on my own.
I would like to use meta-atmel (https://github.com/linux4sam/meta-atmel)
with SAMA5d3xek machine.
I coul
On Tue, Jul 15, 2014 at 6:30 AM, Redwan Mohamed
wrote:
> Hi Otavio, Any update on below issue.
I didn't intend to debug it. I just advised how you could debug it yourself.
I am very sorry if I was not clear on the previous message. I am busy
working in some customer projects and the time I have
Hi Otavio, Any update on below issue.
> Date: Mon, 14 Jul 2014 11:04:47 -0300> Subject: Re: [meta-freescale] QT demo
> with qte-in-use-image recipe
> From: ota...@ossystems.com.br
> To: red...@zumisolutions.com
> CC: meta-freescale@yoctoproject.org
>
> On Sat, Jul 12, 2014 at 6:43 AM, Redwan Moha
20 matches
Mail list logo
