needed to
> set it directly in CV´s code and then recompiling all the lib.
>
>
>
> Regards,
>
> andre
>
>
>
> *From:* Fikret Alim [mailto:fikret.a...@gmail.com]
> *Sent:* Thursday, December 19, 2013 11:56 AM
> *To:* Silva Andre-B22958
> *Cc:* Fabio Estevam; meta-f
ase a lot.
>
>
>
> Regards,
>
> andre
>
>
>
> *From:* Fikret Alim [mailto:fikret.a...@gmail.com]
> *Sent:* Thursday, December 19, 2013 5:40 AM
> *To:* Fabio Estevam
> *Cc:* meta-freescale@yoctoproject.org; Silva Andre-B22958
> *Subject:* Re: [meta-freescale] Using O
perations for
higher resolutions?
Thanks&Best Regards,
Fikret
On Wed, Dec 18, 2013 at 8:18 PM, Fabio Estevam wrote:
> On Wed, Dec 11, 2013 at 12:18 PM, Fikret Alim
> wrote:
> > Hello,
> >
> >
> >
> > I am trying to use OpenCV and OpenGL together for some image
Ok, I solved the problem. I had modified the imx-base.inc file for IMAGE_FS
types in order to conserve space, I had removed ext3 and tar.bz2. After I
changed the variable to the default one, the problem was solved. Sorry for
taking your time.
On Thu, Dec 12, 2013 at 10:20 AM, Fikret Alim wrote
Hi,
In order get the latest updates (Freescale Community BSP 1.5), I have
updated my repo with "repo sync" command and then applied "bitbake
fsl-image-gui". But I got the following error;
| Partition Table: msdos
| Disk Flags:
|
| Number Start End SizeType File system Flags
| 1
ion, unfortunately it is not
> available outside Freescale yet, there are some samples there (IP
> filtering) that you could use, I just need to check if I can share right
> now.
>
>
>
> Regards,
>
> Andre
>
>
>
> *From:* Fikret Alim [mailto:fikret.a...@gmail.com
use it with my
OpenCv applications directly.
Thanks,
Fikret
On Fri, Nov 29, 2013 at 5:14 PM, Fikret Alim wrote:
> Dear Andre,
>
> When I run gesture demo, I get the following console output now;
>
> root@imx6qsabrelite:~/gpu_samp/bin# ./gesture
>
> Using: min: 15, max: 4
I was about to ask you about the galcore module, as I always use it as
> built-in I thought you were using this way too. I´m glad it worked.
>
>
>
> About the gesture recognition demo, what is going on ? what kind of errors
> are you getting ?
>
>
>
> Regards,
>
>
I’m not aware of host side differences
> between FP/EP but at run-time the kernels will fail to run and possibly
> fail to compile as well.
>
> On Nov 28, 2013, at 6:56 AM, Fikret Alim wrote:
>
> Hello,
>
> Does IMX6Q support OCL module of OpenCV for GPU programming
does it
> work ?
>
> Regards,
> Andre
>
> -Original Message-
> From: otavio.salva...@gmail.com [mailto:otavio.salva...@gmail.com] On
> Behalf Of Otavio Salvador
> Sent: Thursday, November 28, 2013 12:02 PM
> To: Fikret Alim; Silva Andre-B22958
> Cc: meta-
Hello,
Does IMX6Q support OCL module of OpenCV for GPU programming? I have found
ocl header insider opencv2/nonfree/ocl.hpp, but the ocl.hpp here includes
opencv2/ocl/ocl.hpp which does not exist. There is no OCL folder inside
opencv2 folder.
Is it supported? If yes, do I need to download from an
Hello,
I am trying to run X11 examples included in gpu_sdk_v1.00 package. I am
using Yocto fsl-gui-image. I have tried to run 06_Texturing example under
GLES2.0 folder. I have only modified -mfloat-abi variable in the Makefile
from softfp to hard. Then I have compiled the code, but unfortunately i
Hello,
I am trying to run X11 examples included in gpu_sdk_v1.00 package. I am using
Yocto fsl-gui-image. I have tried to run 06_Texturing example under GLES2.0
folder. I have only modified -mfloat-abi variable in the Makefile from softfp
to hard. Then I have compiled the code, but unfortunate
Hello,
I have successfully compiled and loaded fsl-image-gui image to Sabre Lite
board. The first time operating system started, I could test features. But
then it gives en error "thermal notify: trip_hot reached!".
I don't know the reason but now it is not stable, too many crashes occur.
Wheneve
Hello,
I got the following error during compile process. What can be the reason,
how can I solve it?
Thanks&Best Regards,
Fikret
ubuntu@ubuntu:~/projects/fsl-community-bsp/fsl-community-bsp/build$ bitbake
fsl-image-test
Pseudo is not present but is required, building this first before the main
b
15 matches
Mail list logo