Re: [meta-freescale] bitbake master-next branch is not building

Same problem on the master branch. But thanks for trying to help :) On Thu, Mar 13, 2014 at 1:56 AM, Otavio Salvador ota...@ossystems.com.brwrote: On Mon, Mar 10, 2014 at 7:55 AM, Tarek El-Sherbiny tarek.elsherb...@gmail.com wrote: Build instructions: ~/$ mkdir yocto ~/$ cd yocto

Re: [meta-freescale] bitbake master-next branch is not building

On Thu, Mar 13, 2014 at 12:18 PM, Otavio Salvador ota...@ossystems.com.brwrote: On Thu, Mar 13, 2014 at 7:54 AM, Tarek El-Sherbiny tarek.elsherb...@gmail.com wrote: Same problem on the master branch. But thanks for trying to help :) You seem to not be using fsl-community-bsp; so please add

[meta-freescale] bitbake master-next branch is not building

Hi All, Build instructions: ~/$ mkdir yocto ~/$ cd yocto ~/yocto$ repo init -u https://github.com/Freescale/fsl-community-bsp-platform -b master-next ~/yocto$ repo sync ~/yocto$ MACHINE=nitrogen6x . setup-environment build ~/yocto/build$ vi conf/local.conf ... added these two lines:

[meta-freescale] Changing Virtual/kernel for Nitrogen Board

Hi All, I'm using the Nitrogen board and I needed to change the kernel to the original Freescale linux-imx. I tried the following: (1) Add PREFERRED_PROVIDER_virtual/kernel = linux-imx in build/conf/local.conf (2) Add DEFAULT_PREFERENCE = 1 in a newly created linux-imx_3.0.35.bbappend (3) Add

Re: [meta-freescale] Changing Virtual/kernel for Nitrogen Board

Hi Eric, The blocks I'm using are: VPU - IPU - HDMI - USB - MMC - ETHERNET Are these blocks not stable on the linux-imx kernel? Thanks, Tarek On Wed, Mar 5, 2014 at 4:42 PM, Eric Nelson eric.nel...@boundarydevices.com wrote: Hi Tarek, On 03/05/2014 08:41 AM, Tarek El-Sherbiny wrote

[meta-freescale] Failed to fetch evtest package

Hi All, I couldn't build 3.10.17 because of the evtest package. Seams that freedesktop.org is not available. NOTE: Executing RunQueue Tasks WARNING: Failed to fetch URL http://cgit.freedesktop.org/~whot/evtest/snapshot/evtest-1.25.tar.bz2;name=archive, attempting MIRRORS if available ERROR:

[meta-freescale] DHCP IP address is never obtained if powering up without network connected

Hi, Starting i.MX6 board without network cable connected then connect the cable. I expect udhcpc to obtain ip address after the if-up event but it doesn't. How do I force udhcpc to obtain IP after detecting if-up event? -- *Tarek* ___ meta-freescale

Re: [meta-freescale] DHCP IP address is never obtained if powering up without network connected

.cortexa9hf_vfp_neon And ifupdown: # rpm -qa | grep ifupdown init-ifupdown-1.0-r4.cortexa9hf_vfp_neon dhcp client should obtain ip once I plug-in the cable, right? On Mon, Feb 3, 2014 at 4:23 PM, Bob Cochran yo...@mindchasers.com wrote: On 02/03/2014 11:12 AM, Tarek El-Sherbiny wrote: Hi, Starting

[meta-freescale] Upgrading the kernel without having to install 600 kernel-modules

Hi All, Every time I compile a new kernel and try to upgrade my image using smart upgrade there are 600 kernel-modules that gets upgraded although I'm not using any of these modules. This takes very long time. The reason for this is the kernel-modules package which includes all kernel modules

[meta-freescale] GStreamer VPU support on i.MX6

What is the latest on this subject. I'm building (dora) branch and I've included core-image-basic.bb + packagegroup-fsl-gstreamer but the firmware is not installed! What else should I do? PS: MACHINE=nitrogen6x https://lists.yoctoproject.org/pipermail/meta-freescale/2013-December/005858.html --

Re: [meta-freescale] i.MX6Q VPU firmware missing for core-image-basic

-basic ! Hope someone could shed some light here. On Tue, Dec 3, 2013 at 3:32 PM, Tarek El-Sherbiny tarek.elsherb...@gmail.com wrote: I'm building a console image with VPU and gstreamer support. I've included core-image-basic.bb in my image in addition to packagegroup-fsl-gstreamer

Re: [meta-freescale] i.MX6q Boot failure using MACHINE=nitrogen6x

the bandwidth requirements with multiple displays configured. I'm also not certain what you're running into with the gstreamer build. No problem I found it :-) Regards, Eric On 12/03/2013 10:33 AM, Tarek El-Sherbiny wrote: Hi Eric, On the command line arguments I had dmfc=3. That was set

Re: [meta-freescale] i.MX6q Boot failure using MACHINE=nitrogen6x

, Tarek El-Sherbiny wrote: Hello, I'm building the latest Yocto branch (/dora/) for the Nitrogen6 board as given by this post: http://boundarydevices.com/yocto-dora-release-mx6/ The image is based on core-image-basic + packagegroup-fsl-gstreamer . When I boot the nitrogen board I get

Re: [meta-freescale] i.MX6q Boot failure using MACHINE=nitrogen6x

:1280x720p-60 V:640x480p-60 root@nitrogen6x:~# cat /sys/class/graphics/fb0/mode S:1280x1024p-60 I'm not running the latest U-boot! Thanks, Tarek On Tue, Dec 3, 2013 at 2:48 PM, Eric Nelson eric.nel...@boundarydevices.com wrote: Hi Tarek, On 12/03/2013 05:43 AM, Tarek El-Sherbiny wrote

[meta-freescale] i.MX6Q VPU firmware missing for core-image-basic

I'm building a console image with VPU and gstreamer support. I've included core-image-basic.bb in my image in addition to packagegroup-fsl-gstreamer. The firmware is not installed and I'm getting this error: Please put bin file to /lib/firmware/vpu folder or export VPU_FW_PATH env I've seen

Re: [meta-freescale] i.MX6q Boot failure using MACHINE=nitrogen6x

,1920x1080@60 fbmem=24M,10M root=/dev/mmcblk0p1 rootfs=ext2 rw rootwait enable_wait_mode=off consoleblank=0 dmfc=3 bpp=32 Also On Tue, Dec 3, 2013 at 4:40 PM, Eric Nelson eric.nel...@boundarydevices.com wrote: Hi Tarek, On 12/03/2013 08:12 AM, Tarek El-Sherbiny wrote: Hi Eric, root@nitrogen6x

[meta-freescale] i.MX6q Boot failure using MACHINE=nitrogen6x

Hello, I'm building the latest Yocto branch (*dora*) for the Nitrogen6 board as given by this post: http://boundarydevices.com/yocto-dora-release-mx6/ The image is based on core-image-basic + packagegroup-fsl-gstreamer . When I boot the nitrogen board I get the following kernel messages then

Re: [meta-freescale] Build image for Nitrogen board fails -dylen branch-

Hi Otavio, How do I disable building u-boot ? I want to remove it from the fsl-image-fb image. On Mon, Aug 19, 2013 at 1:10 PM, Otavio Salvador ota...@ossystems.com.brwrote: On Mon, Aug 19, 2013 at 5:00 AM, Tarek El-Sherbiny tarek.elsherb...@gmail.com wrote: Hi, I'm trying the latest

[meta-freescale] i.MX6Q VPU firmware missing MACHINE=Nitrogen6X

Hi, The VPU firmware is not installed for Nitrogen6X board Image.bb: include recipes-core/images/core-image-minimal.bb IMAGE_FEATURES += debug-tweaks DISTRO_FEATURES += pulseaudio SOC_EXTRA_IMAGE_FEATURES ?= tools-testapps # mesa-demos is currently broken when building with other GL library

Re: [meta-freescale] i.MX6 mfw_isink is not working with X11 Nitrogen

Same problem root@nitrogen6x:~# DISPLAY=:0 /unit_tests/mxc_epdc_x11_fb_test.out Error: unable to open X display Does work for you Daiane? On Mon, Dec 17, 2012 at 3:36 PM, Daiane Angolini daiane.angol...@freescale.com wrote: On 12/17/2012 01:31 PM, Tarek El-Sherbiny wrote: Hi Eric, I

Re: [meta-freescale] iMX6: How to Include X11 into my image

What is the simplest image that contains X to start with? Thanks, Tarek On Thu, Dec 13, 2012 at 11:47 AM, Otavio Salvador ota...@ossystems.com.brwrote: On Thu, Dec 13, 2012 at 9:40 AM, Tarek El-Sherbiny tarek.elsherb...@gmail.com wrote: What is the easiest way to add X11 into my local

Re: [meta-freescale] iMX6: How to Include X11 into my image

to fix this? Thanks Tarek On Thu, Dec 13, 2012 at 12:59 PM, Otavio Salvador ota...@ossystems.com.brwrote: On Thu, Dec 13, 2012 at 10:50 AM, Tarek El-Sherbiny tarek.elsherb...@gmail.com wrote: What is the simplest image that contains X to start with? core-image-x11 -- Otavio Salvador

Re: [meta-freescale] iMX6: How to Include X11 into my image

The error is from: ERROR: Task 3792 (/data/extend_homes/telsherbiny/work/fsl-community-bsp/sources/poky/meta/recipes-graphics/xorg-xserver/ xserver-xorg_1.11.2.bb, do_compile) On Thu, Dec 13, 2012 at 1:57 PM, Tarek El-Sherbiny tarek.elsherb...@gmail.com wrote: Hi Otavio, I've created

Re: [meta-freescale] iMX6: How to Include X11 into my image

My poky is master :( Can I just update it to danny or do I need a fresh repo init -b danny ? On Thu, Dec 13, 2012 at 2:05 PM, Otavio Salvador ota...@ossystems.com.brwrote: On Thu, Dec 13, 2012 at 11:57 AM, Tarek El-Sherbiny tarek.elsherb...@gmail.com wrote: Hi Otavio, I've

Re: [meta-freescale] iMX6: How to Include X11 into my image

yes I'm using fsl-community-bsp git describe = 1.3 , I think it's danny If so I'm sure why I can't include X ! :( On Thu, Dec 13, 2012 at 2:25 PM, Otavio Salvador ota...@ossystems.com.brwrote: git describe ___ meta-freescale mailing list