se locally.
From: Vanessa Ayumi Maegima
Sent: Friday, December 1, 2017 3:05 AM
To: Takashi Matsuzawa
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] pico-imx7d bluetooth support?
Hi Takashi,
On Wed, Nov 29, 2017 at 6:43 AM, Takashi Matsuzawa wrote:
> Hello, I learned a bit
Hi Takashi,
On Wed, Nov 29, 2017 at 6:43 AM, Takashi Matsuzawa wrote:
> Hello, I learned a bit.
>
> So, for this BCM4339 (correct?) to work for Bluetooth also, WiFi need to be
> properly working anyway.
>
>
> From: Takashi Matsuzawa
> Sent: Wednesday, November 29,
Hello, I learned a bit.
So, for this BCM4339 (correct?) to work for Bluetooth also, WiFi need to be
properly working anyway.
From: Takashi Matsuzawa
Sent: Wednesday, November 29, 2017 11:43 AM
To: meta-freescale@yoctoproject.org
Subject: Re: pico-imx7d bluetooth
OK, I cannot see uart7 (Bluetooth) in mainline source, which is present in TN
source tree.
I imagine, at least u-boot update is necessary to enable Bluetooth on this
board with mainline kernel.
From: Takashi Matsuzawa
Sent: Wednesday, November 29, 2017 1:36 AM
T
Hello.
I can see WiFi support for this board (by brcmfmac driver and firmware) is
currently being looked at.
Then, what is the status of bluetooth support?
Looking into the chip spec, though both of WiFi and Bluetooth are supported by
single chip, Bluetooth is accessed through UART whereas WIFI