...@mail.butchevans.com] On Behalf Of Paul McCall
Sent: Thursday, July 10, 2014 2:54 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
In this case, all the computers we are testing with are wired
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
] Throughput Problem on Mikrotik RB951
This one may be something for the OP to look at.
If the customer is connected wireless on b at 11Mbps, 3-5M is about all they
will get on a speed test.
If the customer is connected faster, then maybe it is something else.
On 7/9/2014 6:38 PM, Scott Lambert wrote:
I
Hi,
Having an issue with a few customers behind RB951 Mikrotiks. All of these
customers are on bridged Canopy 100's.
Running a test from the Mikrotik (tools/bandwidth test) to a Mikrotik we have
setup at our office I'm seeing 8-10.2Mbps down. However when the customer runs
a speedtest
Change the default queues for the interfaces to not be default-small.
On 7/9/2014 11:47 AM, Justin Marshall wrote:
Hi,
Having an issue with a few customers behind RB951 Mikrotiks. All of these
customers are on bridged Canopy 100's.
Running a test from the Mikrotik (tools/bandwidth test) to a
: Wednesday, July 09, 2014 12:03 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Have you set up another Mikrotik outside on your network and used the MT
bandwidth tests from the 951 to it? ( be sure and test
Problem on Mikrotik RB951
Change the default queues for the interfaces to not be default-small.
On 7/9/2014 11:47 AM, Justin Marshall wrote:
Hi,
Having an issue with a few customers behind RB951 Mikrotiks. All of these
customers are on bridged Canopy 100's.
Running a test from the Mikrotik
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Robert Andrews
Sent: Wednesday, July 09, 2014 12:03 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
Have you set up another
On Wed, Jul 09, 2014 at 10:55:22AM -0700, Robert Andrews wrote:
Under the other MT's I have it's under interface ether[x] Ethernet
That's under winbox
On 07/09/2014 09:28 AM, Paul McCall wrote:
Robert,
Where can you set flow control on a 951? Don't see it in the GUI
I did an
Set 0 auto-negotiate=off speed=10Mbps duplex=full.
A couple of check boxes if you double click the Interface.
On 7/9/2014 2:13 PM, Scott Lambert wrote:
On Wed, Jul 09, 2014 at 10:55:22AM -0700, Robert Andrews wrote:
Under the other MT's I have it's under interface ether[x] Ethernet
That's
for speed
Paul
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Scott Reed
Sent: Wednesday, July 09, 2014 3:27 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
Set 0 auto-negotiate
: Wednesday, July 09, 2014 3:27 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
Set 0 auto-negotiate=off speed=10Mbps duplex=full.
A couple of check boxes if you double click the Interface.
On 7/9/2014 2:13 PM, Scott Lambert wrote:
On Wed, Jul 09, 2014 at 10:55
] On Behalf Of Scott Reed
Sent: Wednesday, July 09, 2014 3:27 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
Set 0 auto-negotiate=off speed=10Mbps duplex=full.
A couple of check boxes if you double click the Interface.
On 7/9/2014 2:13 PM, Scott Lambert
...@mail.butchevans.com] On Behalf Of Scott Reed
Sent: Wednesday, July 09, 2014 3:27 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
Set 0 auto-negotiate=off speed=10Mbps duplex=full.
A couple of check boxes if you double click the Interface.
On 7/9
Lambert
Sent: Wednesday, July 09, 2014 5:33 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
On Wed, Jul 09, 2014 at 07:59:19PM +, Paul McCall wrote:
Scott,
OK, These routers were on 6.7 which didn't have the options for flow
control. We
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
On Wed, Jul 09, 2014 at 07:59:19PM +, Paul McCall wrote:
Scott,
OK, These routers were on 6.7 which didn't have the options for flow
control. We upgraded to 6.15 and now they do!
So, will try setting to flow control and see
I use a RB951Ui-2HnD wirelessly at my house. It is in my basement,
connected via 100Mbps ethernet to the CCR1036 at the base of my tower
which then crosses an AirFiber 24 link to the office. I can move as
many bits per second as the wireless between my 4 year-old MacBook
Pro and the 951 can
] On Behalf Of Scott
Lambert
Sent: Wednesday, July 09, 2014 5:33 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
On Wed, Jul 09, 2014 at 07:59:19PM +, Paul McCall wrote:
Scott,
OK, These routers were on 6.7 which didn't have the options for flow
...@mail.butchevans.com] On Behalf Of Scott Lambert
Sent: Wednesday, July 09, 2014 6:39 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
I use a RB951Ui-2HnD wirelessly at my house. It is in my basement, connected
via 100Mbps ethernet to the CCR1036 at the base of my
18 matches
Mail list logo