> >> Hitachi's drive testing tool seems to be windows only, so are there any
> >> drive checking utilities that can check an individual drive when it's a
> >> part of a RAID1? Or is it safe to assume that if the drive fails in the
> >> RAID it is really dead. I'm trying to make sure I'm not se
Marco Peereboom wrote:
I created it with bioctl, but my version is from a September 1 snapshot
so it is before your fix.
There is a good chance that the hotspare does not work prior to that
fix. I'd say this explains what you see.
The server ran flawlessly for 2 years now, and I'll bet it's
On Tue, 18 Nov 2008, Mark Beihoffer wrote:
> Hello,
>
> I'm working on my laptop with OpenBSD 4.4 and am quite pleased with it thus
> far.
>
> However, I am having trouble with KDE, specifically accessing administrator
> mode in many of the Control Center dialogs.
>
> It prompts me for my passw
Hello,
I'm working on my laptop with OpenBSD 4.4 and am quite pleased with it thus
far.
However, I am having trouble with KDE, specifically accessing administrator
mode in many of the Control Center dialogs.
It prompts me for my password, but no matter whether I type the root
password or the pas
On Wed, Nov 19, 2008 at 12:30 AM, Joe Gidi <[EMAIL PROTECTED]> wrote:
> Hi John,
>
> When I upgraded to -current, I kept the firmware downloaded before on
> damien's website (3.0) :
>
> [EMAIL PROTECTED]: ~ $ pkg_info | grep iwi
> iwi-firmware-3.0Firmware binary ima
On Tuesday 18 November 2008, Cedric Brisseau wrote:
> iwi0: fatal firmware error
I think there was an error loading the firmware. Without loaded firmware
the device is unusable.
Sven
> Hi John,
>
> When I upgraded to -current, I kept the firmware downloaded before on
> damien's website (3.0) :
>
> [EMAIL PROTECTED]: ~ $ pkg_info | grep iwi
> iwi-firmware-3.0Firmware binary image for iwi driver
>
> Cedric.
You may want to upgrade to the 3.0p0 firmware now available from Dam
On Tue, Nov 18, 2008 at 11:28 PM, John Bartoszewski
<[EMAIL PROTECTED]> wrote:
>> Before, all I had to do was "ifconfig iwi0 up" for the antenna light to
>> blink.
>> Now I can't find the way to start it.
>>
>> "ifconfig iwi0 chan" don't find a thing and of course "dhclient iwi0"
>> tell me "no li
"Vivek Ayer" <[EMAIL PROTECTED]> writes:
> I got that snippet from the pf book. What should I change it to?
actually "The Book of PF" leaves the definition of the carpdevs macro
as an excercise to the reader. The main reason to mention it at all is
to alert the reader that carp traffic needs to p
> Before, all I had to do was "ifconfig iwi0 up" for the antenna light to blink.
> Now I can't find the way to start it.
>
> "ifconfig iwi0 chan" don't find a thing and of course "dhclient iwi0"
> tell me "no link".
> ...
> iwi0: fatal firmware error
Did you save or reinstall the firmware files w
Hi all,
It has been a long time since I haven't use the iwi device on my
laptop (IBM T43).
Before, all I had to do was "ifconfig iwi0 up" for the antenna light to blink.
Now I can't find the way to start it.
"ifconfig iwi0 chan" don't find a thing and of course "dhclient iwi0"
tell me "no link".
> I created it with bioctl, but my version is from a September 1 snapshot
> so it is before your fix.
There is a good chance that the hotspare does not work prior to that
fix. I'd say this explains what you see.
> The server ran flawlessly for 2 years now, and I'll bet it's been a year
> sin
Answers to your questions are inline /w the question
2008/11/18 tico <[EMAIL PROTECTED]>:
> 1. Why is this sent to the "ports@" mailing list ?
I've lurked the list for a long time - since around 2.8. I've asked
the odd question here and/or there, and got flamed once when I asked
about a question
Marco Peereboom wrote:
On Mon, Nov 17, 2008 at 01:44:27PM -0700, Jeff Ross wrote:
Hi all,
At work I've got a server with an LSI MegaRAID (dmesg below) that
suddenly seems to be killing hard drives. Last Thursday I had one drive
fail, and the system didn't begin rebuilding onto the hot spar
I may actually end up just turning off load balancing on the router
for now and just leave it on the web servers. Then again, it would be
nice if the router did some work since it'll be on all the time using
all that electricity. Is there a clever cron script I could write to
manually change the ma
I got that snippet from the pf book. What should I change it to?
On Tue, Nov 18, 2008 at 4:32 AM, Marco Pfatschbacher <[EMAIL PROTECTED]> wrote:
> On Thu, Nov 13, 2008 at 05:51:49PM -0800, Vivek Ayer wrote:
>> Yay! I got ssh and http to work on the CARP interface. Thanks.
>>
>> However, the httpd
Finally updated my console server that precipitated the original patch
and found 4.4 didn't work with the card. Turns out when my patch got
added, one digit was incorrect.
Here's a patch to fix.
--Kurt
Index: pcidevs
===
RCS fil
jul wrote:
Hello
has someone setup a vpn tunnel between openbsd and an iphone ?
it seems ipsec part is strictly limited to "cisco ipsec" with a user
account/password so not good for us.
Else there is pptp and l2tp but i'm not sure there is anything in base
to do this.
Ports seems to only have p
On Mon, Nov 17, 2008 at 01:44:27PM -0700, Jeff Ross wrote:
> Hi all,
>
> At work I've got a server with an LSI MegaRAID (dmesg below) that
> suddenly seems to be killing hard drives. Last Thursday I had one drive
> fail, and the system didn't begin rebuilding onto the hot spare until I
> reb
Dieter wrote:
At work I've got a server with an LSI MegaRAID (dmesg below) that
suddenly seems to be killing hard drives. Last Thursday I had one drive
fail, and the system didn't begin rebuilding onto the hot spare until I
rebooted.
I would hope that the controller isn't killing drives.
Hello,
I have big trouble with relayd on openBSD 4.4 to loadbalance 2 squid proxies :
* relayctl reload doesn't work. It just says "command failed" and nothing
appears in relayd logs (relayd launched with relayd -d)
I am testing right now, but when I will go in production to kill and restart
relay
Toplu mail gvnderimi hig ku~kusuz en g|gl| ve en etkili reklam yollar}ndan
biridir.
Toplu Mail Adresleri 50 YTL T|rkiyenin En B|y|k Mail Datas}
5 M]LYON ADET SEKTVREL 2008 G\NCEL MA]L ADRES]
S]Z DE M\^TER] PORTFVY\N\Z\ GEN]^LETEREK \R\NLER]N]Z] ]NTERNET ORTAMINDA DAHA
S\RATL] VE DAHA D\^\K B]R MAL]
On Thu, Nov 13, 2008 at 05:51:49PM -0800, Vivek Ayer wrote:
> Yay! I got ssh and http to work on the CARP interface. Thanks.
>
> However, the httpd redirect is not working just yet on the CARP
> interface for one of the computers. Does IP balancing mess up
> redirect?
Well, that depends.
IP balan
On 2008-11-18, John Nietzsche <[EMAIL PROTECTED]> wrote:
> Dear list members,
>
> i am reading "What's new" for OpenBSD 4.4. It is stated about the
> initial import of ypldap(8). But, i cannot locate the ypldap daemon.
> Do you know where is it?
>
> Thanks a lot.
>
>
/usr/src/usr.sbin/ypldap
It w
On Fri, Nov 14, 2008 at 1:01 AM, Stuart Henderson <[EMAIL PROTECTED]> wrote:
> please mail back to misc@ with your findings...
Different kernels didn't make any visible difference. As didn't ACPI
vs. APM. I could not get the system up with the MP kernel and ACPI
enabled (see dmesg #1 attached). Wi
John Nietzsche ha scritto:
Dear list members,
i am reading "What's new" for OpenBSD 4.4. It is stated about the
initial import of ypldap(8). But, i cannot locate the ypldap daemon.
Do you know where is it?
Thanks a lot.
Search on the archives.
http://marc.info/?t=12236616303&r=1&w=2
Dear list members,
i am reading "What's new" for OpenBSD 4.4. It is stated about the
initial import of ypldap(8). But, i cannot locate the ypldap daemon.
Do you know where is it?
Thanks a lot.
Chris wrote:
I'm trying to get ACPI suspend and resume working. Typing "apm -z"
from my window manager's xterm just returns me back to the shell.
Typing "apmd" and then "apm -z" tells me "System will enter suspend
mode momentarily." and then nothing happens. Following is my dmesg.
Thanks for any
I'm trying to get ACPI suspend and resume working. Typing "apm -z"
from my window manager's xterm just returns me back to the shell.
Typing "apmd" and then "apm -z" tells me "System will enter suspend
mode momentarily." and then nothing happens. Following is my dmesg.
Thanks for any help.
OpenBSD
This works. Thanks.
> Try this:
>
> replace this line:
> pass in on $vpn_if inet proto tcp to $ext_addr port 21 \
> flags S/SA keep state
> with this:
> pass in on $vpn_if inet proto tcp to $Srv port 21 \
> flags S/SA keep state
>
> Remember rdr's happen before filtering, so when pf see's
On Tue, Nov 18, 2008 at 12:43 AM, Man Lam <[EMAIL PROTECTED]> wrote:
> How to enable and disable the promiscuous mode with OpenBSD 4.3.
>
> I didn't find the -promisc argument in ifconfig.
Why would you want to do that manually? Software that needs
promiscuous mode should turn it on automatically
On 03:43:49 Nov 18, Man Lam wrote:
> Hi,
>
> How to enable and disable the promiscuous mode with OpenBSD 4.3.
>
> I didn't find the -promisc argument in ifconfig.
>
man pcap
-Girish
Hi,
How to enable and disable the promiscuous mode with OpenBSD 4.3.
I didn't find the -promisc argument in ifconfig.
Thanks
M
33 matches
Mail list logo