Johan,
Do I have to remove these two rules or modify them by removing ipencap?
pass in quick on $ipsec_enc_if proto ipencap from any to ($ipsec_if) \
keep state (if-bound)
pass out quick on $ipsec_enc_if proto ipencap from ($ipsec_if) to any \
keep state (if-bound)
On 5/12/2018 10:11 AM, Johan H
On Sat, May 12, 2018 at 10:53:29PM +1000, tomr wrote:
>
> I've been playing with an apu2 and an AR9280, which is supported by athn(4).
>
> It seems to perform terribly when I connect a second antenna. Is this
> the expected behaviour currently? Is there some MIMO magic that isn't
> yet implemente
> tap0 is a control interface created by switchd to communicate with
> switches. It won't carry normal network traffic.
(Last bit of noise, and I'm done)
Actually, I think I'm wrong here. I'll need to dig a bit more to
answer correctly.
On Sat, May 12, 2018 at 8:54 PM, Ayaka Koshibe wrote:
>> Currently, I am using a bridge. From what I understand from the patch
>> and the cvsweb history, that patch is waiting for ok and commit.
>
> I've actually held back on that diff since it's a bit insufficient by itself.
Sorry, I should elab
> Currently, I am using a bridge. From what I understand from the patch
> and the cvsweb history, that patch is waiting for ok and commit.
I've actually held back on that diff since it's a bit insufficient by itself.
> This time, the switch does not close. However, I am still unable to
> ping 8.8
Good evening, all,
Recently upgraded my ERL to a snapshot (5/10/18) to test out the octcrypto
module that visa recently enabled. Install went as smoothly as can be
expected, upon reboot I saw the octcrypto module load,and everything
seems to be working great. I haven't had a chance to test out t
Apologies, correction:
obsd3# pfctl -f /etc/pf.conf
Should be:
obsd2# pfctl -f /etc/pf.conf
Joe
On Sat, May 12, 2018 at 9:37 PM Joseph Crivello
wrote:
> I cannot get reply-to working with if-bound under any circumstances. It
> works fine with floating, though.
> Is this expected behavior? Th
I cannot get reply-to working with if-bound under any circumstances. It
works fine with floating, though.
Is this expected behavior? The (similar) route-to option works fine with
if-bound rules, and I cannot find any documentation that states reply-to
cannot be used with if-bound rules.
Assuming
Hello,
I'd like to dive into the bridge driver and I am trying to setup a
kernel debugging environment.
I chose to use VMM to do that but I don't seem to find a way to connect
my local gdb to the VMM console. I guess I would need another serial
device for KGDB, but I have not found how to do that
On Sun, May 13, 2018 at 01:32:59AM +1000, tomr wrote:
> With one antenna connected, I get about 60-80% signal on my iwm client
> at a distance of approximately 5m. With two antennas connected, the same
> client needs to be <1m away from the AP to connect at all, and even then
> gets about <20%.b
H
On 05/13/18 01:00, Stefan Sperling wrote:
> On Sat, May 12, 2018 at mybeautifulwifi10:53:29PM +1000, tomr wrote:
>>
>> I've been playing with an apu2 and an AR9280, which is supported by
athn(4).
>>
>> It seems to perform terribly when I connect a second antenna. Is this
>> the expected behaviour
On Sat, May 12, 2018 at 10:53:29PM +1000, tomr wrote:
>
> I've been playing with an apu2 and an AR9280, which is supported by athn(4).
>
> It seems to perform terribly when I connect a second antenna. Is this
> the expected behaviour currently? Is there some MIMO magic that isn't
> yet implemente
I've been playing with an apu2 and an AR9280, which is supported by athn(4).
It seems to perform terribly when I connect a second antenna. Is this
the expected behaviour currently? Is there some MIMO magic that isn't
yet implemented? Or do I just need to get the antenna spacing right?
I see a fo
> On May 11, 2018, at 06:21, Denis wrote:
>
> Hello,
>
> I have working ikev2 tunnel between two virtual aliased subnets. But no
> traffic over IPsec tunnel from $ext_if on server machine to $ext_if on
> client machine and vice-versa. Both machines are using in production and
> firewalled by PF
On Thu, May 10, 2018 at 10:35:01AM -0400, Predrag Punosevac wrote:
> Where can I learn more about the work on the new lpd server aside of
> reading the code? I learnt about it from the OpenBSD Journal
>
> https://undeadly.org/cgi?action=article;sid=20180509184829
>
>
> Thank you!
> Predrag
>
Th
15 matches
Mail list logo