Thank you Otto for your quick answer.
Le jeudi 18 juillet 2019 à 08:54:02 UTC+2, Otto Moerbeek a
écrit :
On Thu, Jul 18, 2019 at 06:41:12AM +, Mik J wrote:
> Hello,
> I'm using Openbsd 6.5 and have DiG 9.4.2-P2 provided with it.This version
> seems to be old (from 2009) but I cou
On Thu, Jul 18, 2019 at 06:41:12AM +, Mik J wrote:
> Hello,
> I'm using Openbsd 6.5 and have DiG 9.4.2-P2 provided with it.This version
> seems to be old (from 2009) but I couldn't find exactly when it dates.
> However new DNS records appeared in 2013 such as CAA in RFC 6844When I dig
> the
Hello,
I'm using Openbsd 6.5 and have DiG 9.4.2-P2 provided with it.This version seems
to be old (from 2009) but I couldn't find exactly when it dates.
However new DNS records appeared in 2013 such as CAA in RFC 6844When I dig the
CAA record dig returns NXDOMAIN
insteadhttps://dns.google.com/que
Hi Alexander,
the log tells us that both times the handshake ends in the successful
establishment of an IKE SA. Like you reported both match the policy 'clientA'
instead of A and B:
> Jul 15 11:06:45 server iked[12701]: sa_state: VALID -> ESTABLISHED from
> 5.6.7.8:4500 to 1.2.3.4:4500 policy 'c
Hello,
I reinstalled using the OpenBSD/amd64 install65.fs file.
It works. =)
Thank you very much to all of you for your help !
Nicolas.
> Gesendet: Mittwoch, 17. Juli 2019 um 13:32 Uhr
> Von: "Stefan Sperling"
> An: oxst...@gmx.net
> Cc: misc@openbsd.org
> Betreff: Re: Blank screen after ins
On Wed, Jul 17, 2019 at 02:32:22PM -0400, Predrag Punosevac wrote:
> Hi Misc,
>
> Are there any plans to build syspathes for Octeon platform in the
> future? Octeon platform has matured nicely since the introduction in
> 2013 and is becoming my goto platform for SOHO environments. Apart of
> the l
Hi,
we recently found that the switch to constant-time AES has quite a heavy
impact on IPsec performance. But since according to CVS that was part
of OpenBSD 6.2 already, it's probably something else.
https://github.com/openbsd/src/commit/d223d7cb85c1f2f705da547a0134b949655abe6a
Patrick
On Wed
Hi Misc,
Are there any plans to build syspathes for Octeon platform in the
future? Octeon platform has matured nicely since the introduction in
2013 and is becoming my goto platform for SOHO environments. Apart of
the lack of hardware clocks the main nuisance is the lack of binary
patches.
I kn
Hi misc,
I was following with a bit of amusement recent thread
https://marc.info/?t=15629982761&r=1&w=2
as a signal-to-noise ratio is typically higher on misc@openbsd than most
non-developer mailing lists I am subscribed to.
At some point it occurred to me that Eric Faurot was working on
Hello,
I'm currently doing some IPsec performance testing between OpenBSD 6.3 and 6.5.
Dmesg and ipsec.conf is below for information.
Testing with iperf3 and 1500B packets, throughput drops around 1/3, from 919
Mbps to 623 Mbps.
I also tried 6.4, which has similar perfomance to 6.5.
I went throu
On Wed, Jul 17, 2019 at 01:32:37PM +0200, Stefan Sperling wrote:
> On Wed, Jul 17, 2019 at 01:15:26PM +0200, oxst...@gmx.net wrote:
> > Hello,
> >
> > I recently installed OpenBSD 6.5 on an i386 router.
> > The intallation process went fine. However, I got a black screen after
> > rebooting.
> >
On Wed, Jul 17, 2019 at 01:15:26PM +0200, oxst...@gmx.net wrote:
> Hello,
>
> I recently installed OpenBSD 6.5 on an i386 router.
> The intallation process went fine. However, I got a black screen after
> rebooting.
>
> I tried opening a SSH session, but the computer doesn't reply.
>
> The scre
Hi,
Here is a dmesg:
https://www.centroid.eu/blog/c?article=1563349296
As usual OpenBSD continues to surprise me when I fitted a PCI-X quad em(4)
card in my G5 PowerMac. It works!
Thank you so much!
-peter
have a look at man boot ...
you need to set tty to the correct serial port com0 com1 etc...
and you need to set the Baud rate... spec .. depending rotuer baud settings
115200 and N 8 1 ...
On Wed, 17 Jul 2019 at 12:22, wrote:
> Hello,
>
> I recently installed OpenBSD 6.5 on an i386 router.
> Th
Hello,
I recently installed OpenBSD 6.5 on an i386 router.
The intallation process went fine. However, I got a black screen after
rebooting.
I tried opening a SSH session, but the computer doesn't reply.
The screen is attached using a VGA cable. The computer send a signal over that
cable. If I
+1 :)))
For instance, with epson C5790 (but also 5690, etc all xx90 printers) the
PPD file is available:
http://download.ebz.epson.net/dsc/du/02/DriverDownloadInfo.do?LG2=IT&CN2=&DSCMI=69279&DSCCHK=7ab2791f6b67457707398fa7a534e6acdf4bce44
and CUPS does the job!
On Tue, Jul 16, 2019 at 2:32 PM St
16 matches
Mail list logo
