Hi all,
I'm trying to install 3.8 on a sunfire v120
I am able to net boot it from an i386 using linux and openbsd38.
Things seem ok up to booting bsd.rd, but then output stops after:
......
rd0: fixed, 6144 blocks
root on rd0a
rootdev=0x500 rrootdev=0x3d00 rawdev=0x3d02
(note that the last 2 lines take a long time to come up)
The samsung removable cd0 recognised below by bsd is not usable for
booting since openboot's probe-ide shows all 4 devices as "Not Present"
and so:
ok boot cdrom fails.
The only output i can provide is the serial console log:
==================================================================
lom>poweron
lom>
LOM event: +2h14m38s host power on
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #53825868.
Ethernet address 0:3:ba:35:51:4c, Host ID: 8335514c.
ok boot net bsd.rd
Boot device: /pci'1f,0/pci'1,1/network'c,1 File and args: bsd.rd
Timeout waiting for ARP/RARP packet
10800 >> OpenBSD 3.8 (obj) #1: Thu Sep 1 17:32:43 MDT 2005
deraadt'sparc64.openbsd.org:/usr/src/sys/arch/sparc64/stand/ofwboot.net/obj
Using BOOTPARAMS protocol: ip address: 10.0.0.200, hostname: sunny
root addr=10.0.0.118 path=/export
Booting /pci'1f,0/pci'1,1/network'c,1/bsd.rd
2325112'0x1000000+3256616'0x1800000+937688'0x1b1b128
symbols ' 0xfff44200 42 start=0x1000000
console is /pci'1f,0/pci'1,1/isa'7/serial'0,3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.8 (RAMDISK) #459: Sat Sep 10 16:41:34 MDT 2005
deraadt'sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/RAMDISK
total memory = 1073741824
avail memory = 971956224
using 6553 buffers containing 53682176 bytes of memory
bootpath: /pci'1f,0/pci'1,1/network'c,1
mainbus0 (root): Sun Fire V120 (UltraSPARC-IIe 648MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe ' 648 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K
external (64 b/l)
psycho0 at mainbus0
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 3; PCI bus 0
DVMA map: c0000000 to e0000000
IOTDB: 4d02000 to 4d82000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 vendor 0x108e product 0x5000 rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 12 function 0 vendor 0x108e product 0x1100 rev 0x01
flashprom at ebus0 addr 0-fffff not configured
clock1 at ebus0 addr 0-1fff: mk48t59: hostid 8335514c
ebus_attach: idprom: incomplete
SUNW,lomh at ebus0 addr 200000-200003 ipl 42 not configured
gem0 at pci1 dev 12 function 1 vendor 0x108e product 0x1101 rev 0x01:
ivec 3006, address 00:03:ba:35:51:4c
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0010dd, model 0x0002, rev. 1
ohci0 at pci1 dev 12 function 3 vendor 0x108e product 0x1103 rev 0x01:
ivec 24, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x108e OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
vendor 0x10b9 product 0x7101 (class prehistoric subclass miscellaneous,
rev 0x00) at pci1 dev 3 function 0 not configured
vendor 0x10b9 product 0x7101 (class prehistoric subclass miscellaneous,
rev 0x00) at pci1 dev 3 function 0 not configured
ebus1 at pci1 dev 7 function 0 vendor 0x10b9 product 0x1533 rev 0x00
power at ebus1 addr 2000-2007 ipl 37 not configured
com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, 16 byte fifo
pciide0 at pci1 dev 13 function 0 vendor 0x10b9 product 0x5229 rev
0xc3: DMA, channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using ivec 180c for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N102> SCSI0
5/cdrom removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
gem1 at pci1 dev 5 function 1 vendor 0x108e product 0x1101 rev
0x01interrupt_vector: spurious vector 7df at pil 13
: ivec 301c, address 00:03:ba:35:51:4d
ukphy1 at gem1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0010dd, model 0x0002, rev. 1
ohci1 at pci1 dev 5 function 3 vendor 0x108e product 0x1103 rev 0x01:
ivec 26, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x108e OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ppb1 at pci0 dev 1 function 0 vendor 0x108e product 0x5000 rev 0x13
pci2 at ppb1 bus 2
siop0 at pci2 dev 8 function 0 vendor 0x1000 product 0x000b rev 0x07:
ivec 1820, using 8K of on-board RAM
scsibus1 at siop0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <FUJITSU, MAP3367N SUN36G, 0301> SCSI4
0/direct fixed
sd0: 34732MB, 24622 cyl, 27 head, 107 sec, 512 bytes/sec, 71132959 sec
total
siop1 at pci2 dev 8 function 1 vendor 0x1000 product 0x000b rev 0x07:
ivec 1820, using 8K of on-board RAM
scsibus2 at siop1: 16 targets
ppb2 at pci2 dev 5 function 0 vendor 0x8086 product 0xb154 rev 0x00
pci3 at ppb2 bus 3
vendor 0x108e product 0x1000 (class bridge subclass miscellaneous, rev
0x01) at pci3 dev 0 function 0 not configured
hme0 at pci3 dev 0 function 1 vendor 0x108e product 0x1001 rev 0x01:
address 00:03:ba:34:82:58
luphy0 at hme0 phy 1: LU6612 10/100 PHY, rev. 1
hme0: using ivec 3005 for interrupt
vendor 0x108e product 0x1000 (class bridge subclass miscellaneous, rev
0x01) at pci3 dev 1 function 0 not configured
hme1 at pci3 dev 1 function 1 vendor 0x108e product 0x1001 rev 0x01:
address 00:03:ba:34:82:59
luphy1 at hme1 phy 1: LU6612 10/100 PHY, rev. 1
hme1: using ivec 3014 for interrupt
vendor 0x108e product 0x1000 (class bridge subclass miscellaneous, rev
0x01) at pci3 dev 2 function 0 not configured
hme2 at pci3 dev 2 function 1 vendor 0x108e product 0x1001 rev 0x01:
address 00:03:ba:34:82:5a
luphy2 at hme2 phy 1: LU6612 10/100 PHY, rev. 1
hme2: using ivec 3004 for interrupt
vendor 0x108e product 0x1000 (class bridge subclass miscellaneous, rev
0x01) at pci3 dev 3 function 0 not configured
hme3 at pci3 dev 3 function 1 vendor 0x108e product 0x1001 rev 0x01:
address 00:03:ba:34:82:5b
luphy3 at hme3 phy 1: LU6612 10/100 PHY, rev. 1
hme3: using ivec 3015 for interrupt
pcons at mainbus0 not configured
No counter-timer -- using %tick at 648MHz as system clock.
rd0: fixed, 6144 blocks
==================================================================
*** after a long time I also get: ***
root on rd0a
rootdev=0x500 rrootdev=0x3d00 rawdev=0x3d02
==================================================================
I also tried snapshot ofwboot.net and bsd.rd and got the same problem.
Does anyone know what the problem is?
Thank you all in advance.
- chris
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
