still one thing left before i can decalre this bazaar open.
internet via vpn does not work yet. the vpn server is already acting
as router for my home network.
connecting vpn works.
ping each sides via vpn works.
using the vpnservers unbound as nameserver on notebook works.
it seems like the packa
Hi Christophe,
I Made the changes you proposed. Sadly it still does not work. It seems to
me that the message "ikev2_resp_recv: failed to send auth response" is a
hint to the problem. But why did it fail ?
Jan
Hello everyone,
i'm trying for two days now to setup an IKedV2 Roadwarrior VPN.
the logfiles show, that something is not working correctly during
connection establishment.
I changed configs in every way i can think of without success. Why is
it not working ?
Here is the setup.
PF is permissive
H
I have three of these
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 80
.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R)
https://www.amazon.de/dp/B00LLIOT34/ref=cm_sw_r_cp_apa_eI60AbX2326EP
One of them runs 24/7 for two years by now, without pro
Before working with OpenBSD, I thought archlinux had good documenation, (
the wiki ). On OpenBSD I rarely need more things than the man pages, the
ports PKG docs and tailing the logfiles. But I can understand that
sometimes it feels good for short term benefits to be able to use an up and
running c
Just upgraded to
OpenBSD 6.3-beta (GENERIC.MP) #34: Tue Mar 6 07:52:30 MST 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
everything still fine.
whole process took about 10 minutes (via http)
Jan
2018-03-06 17:05 GMT+01:00 Chris Bennett :
> Then I need to install the latest -current and make a bug report.
> I've had the same problem with several USB 3 flashes on different
> computers. I was hoping the problem would eventually get fixed.
>
I had similar issues with very cheap usbsticks. coul
Hi,
no Problems here.
dmesg:
OpenBSD 6.2-current (GENERIC.MP) #11: Mon Feb 26 19:16:54 MST 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3987337216 (3802MB)
avail mem = 3859464192 (3680MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
Hi,
for anyone whos interested in these tablet+keyboad things here are the
facts about openbsd 6.2 current on the lenovo miix 310.
forgot to try apm -A ... will do next time
tldr;
- installation was done to a usb thumb drive (it's not my device..)
- Installation works as usual (secureboot disable
i noticed the new values in the dmesg, but i am not sure what they
mean. could be max or current resolution.
see
http://openbsd-archive.7691.n7.nabble.com/inteldrm-add-a-handler-for-the-WSDISPLAYIO-GINFO-ioctl-td320907.html
My X11 works normal on 1280x800
$ xrandr
Screen 0: minimum 320 x 200, c
that were my first ideas. never had a wsconcsctl.conf, so nothing so
post. I already created one yesterday trying to solve the problem.
$ cat /etc/wsconsctl.conf
display.height=800
display.width=1200
System says "Value is read only".
Hi,
after upgrading one of my notebooks to 6.2 release my console resolution is only
# wsconsctl
display.type=inteldrm
display.width=848
display.height=480
display.depth=32
Only the left upper of the display is active.
Screen is capable of 1280x800. That was the mode it worked in 6.1 i
think. At l
Hi,
right now (6.1 current amd64) my Intel t7250 CPU is not supported by vmm.
Is there any chance this will change in the next months or should i go for
new hardware ?
Thank you so far for this great Software :-).
Hi,
i am not sure that the hotplug scripts are executed by the system user of
the person that is sitting in front of the Computer. So, no rights to files
or no display can be a Problem. How can the Computer know how inserted that
device ?
I had similar issues, mostly with crypto things in vmd. Can this happen
because we get out of entropy? I have no evidence yet, but i will test
things tomorrow.
That sounds great. Hopefully the grub Problem can be fixed too. My vms did
not work with grub over serial even with a working grub.cfg for serial use.
My process is this:
Install Debian with qemu to a raw disk file
Boot Debian
apt install extlinux
Install extlinux to /Boot
Create extlinux cfg
Write extlinux mbr
Shutdown qemu vm
Put raw disk into vmd vm
Boot vmd vm
Habe fun
All extlinux steps can be found via Google,manpages etc. I can post a
wo
For those who did not already know, vmd can run Linux guests with its
seabios Firmware. However this does not work out of the box for Linux
guests with grub bootloader even with grub serial settings.
Replacing grub with syslinux/extlinux made my Debian 8.7.1 amd64 run. No
problems so far. This sho
yes. daemon should be the one.
daemon:\
:ignorenologin:\
:datasize=infinity:\
:maxproc=infinity:\
:openfiles-max=1024:\
:openfiles-cur=128:\
:stacksize-cur=8M:\
:localcipher=blowfish,a:\
:tc=default:
right now i can succesfully run vms with memory of 2G. Anything above
will bring following error:
vmd_configure: not creating vm vm1.virt.net (disabled)
vmd_configure: not creating vm vm2.virt.net (disabled)
vmd_configure: not creating vm vm3.virt.net (disabled)
vmd_configure: not creating vm vm4.
Works for me.
Bridge0
tap0
tap1
em0
vether0
Important: em0 (link to LAN) must not be configured with an IP Adresse. If
you need an address for your host usw vether0
Huh, just found out that you can preorder this device right now. So
ordering might come later
Hi,
anyone tried running OpenBSD on the udoo x86 ? Dmesg ? What works and what
dosen't ?
Jan
Hi,
the dell latitude E6510 is available with different hardware inside.
so i can not say if yours will work. mine works.
try yours by installing openbsd to a usb-drive (via qemu or something)
and boot openbsd.
Jan
Hi,
having Problems for some time now with the webserver in python2/3 and
radicale, i tried to get it working with httpd.
installed flup. python is working in the chroot.
here's my work so far but i'm not getting any further. anyone got this
working ?
Jan
# cat /etc/httpd.conf
server "default"
Hi,
short Version:
I think there might be a problem with the vte (nic) driver. I'm
searching for a way to gather all the Information to get this fixed.
long Version:
I've built a home router with following components.
- Educake (very small X86 SBC around Arduino) [1]
- USB Lan Card (axe0 nic to
what Input devices are you useing to resize/move the window ?
usb/ps2, Keyboard/mouse ?
Hi,
i had a similar Problem. turned out to happen with plain mplayer and
any windowmanager. when you move the application Window, after a sec
or so mplayer stops Sound. can you verify the behavior ?
When you do:
open xterm
ulimit -d 2000
start vm from this xterm
same error ?
Hi,
im still trying to run openbsd on my (quite special) 86duino educake.
i am making some progress, but right now i could need some directions.
the device boots to some piont, then it does nothing. but plugging in
a usb stick in it produces output.
i can not get a login.
i've tested 5.4-5.6, same
Hi,
i've bought an new device. x86duino educake. there is a dmesg that
looks like it has worked with openbsd 5.4 [1].
I'm trying to run 5.7 release on it an getting a panic. any ideas ?
jan
[1] http://www2192ue.sakura.ne.jp/~uaa/gomitext/2014/20140219/dmesg.txt
>> OpenBSD/i386 BOOT 3.26
boot>
Hi,
i am using pxe boot with autoinstall and a hostname specific tgz file
in the sets to deploy many similar Firewalls.
i tell the installer how to configure at least one nic, to download
the sets. i use dhcp for that.
after that everything works as expected until the install is done and
machine r
Hi,
where: Augustiner Keller Arnulfstraße 52, 80335 München
www.augustinerkeller.de
hopefully i can get a table down in the "schwemm" (Kellergewölbe). I
will bring a puffy or something to find me.
when: 06.02.2015 16:30 TOMORROW
what: Fun - People - Tech - Beer
Please send a mail if you come .
J
Hi,
stolen the idea from Reyk, maybe we can have a BSD meetup near munich.
One and only cirtitcal question is where.
I live about 30km North of Munich, but my job is near munich central station.
I fine with everywhere reachable in 1,5 hours.
Jan
Challenge accepted =)
I'm thinking about organizing a little meet up for some time. i
thought nobody will come, but maybe its worth a try. Proposals for a
location ?
And Maybe we should start a new thread for munich.
Hey Reyk,
that sounds great. Unfortunately the Way to Hannover is 600km from
here. I hope something simliar is happening soon near Munich. I was
not able to find any Meeting for OpenBSD here.
Jan
Hi,
as i am always searching for new (low power) hardware, today i found
something new.
It sounds quite nice for running openbsd as a router/firewall.
It is possible that not everything is supported right now in openbsd
but the low power and number of nics made me smile.
It might be availiable aro
Hi Johan,
dmesg (seems i lied little bit, got 4gb ram)
OpenBSD 5.5-current (GENERIC.MP) #250: Tue Jul 8 12:13:47 MDT 2014
t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4062691328 (3874MB)
avail mem = 3945762816 (3762MB)
mpath0 at root
scsibus0 at mpath0: 256 ta
Hi,
i thought chromebooks can be nice with openbsd some time ago. i found
that out that at least some chromebooks have a bios and bootloader
that i dont like.
after that i bought a thinkpad x201 with i5, gsm modem,ssd, 2gb ram,
giant battery and dockingstation for 340€ at ebay. its quite light and
Hi, had same Problem.the only (poor) workaround i found is running qemu as
root .
I had the same problems since June snapshots. I also noticed, that with
faster Hardware the lag gets smaller. I tried different sysctls, different
Hardware, different Browsers. In the Ende deleting .config/.chrome and the
local Firefox config folder solved my Problem instantly.
I dont know what cau
Hi,
im running
OpenBSD 5.5 (GENERIC.MP) #300: Wed Feb 26 16:28:46 MST 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Right now i'm trying some network fun.
I am using a thinkpad x201 where i combined iwn0 and em0 to a trunk
failover device. that works without prob
Pushing the subscription idea and cd set selling a litte bit further, what
about a signed cd set or artwork from theo or a developer ( next hackathon
) . The time investment should be no problem and this could sell for ...
70$ or something.
This is cool, no time effort, promotion easy possible ( u
I like the subscription idea. I'd love to have every release without
actually doing the shopping every time. This could at least make a bit of
safe money.
I believe, making a company sending 20k$ every year to openbsd could be
quite difficult.
Why should they do this ?
What do they get ?
Why is t
Hi misc,
for some time i am trying to get a easy videochat working with openbsd. For
testing different aproaches,frameworks,protocols and daemons i need some
clients. Problem is that i dont want to run through my whole cellar from
machine to machine and also buy a few more cams.
For linux i found s
Hi Jerome,
you didnt post your /etc/fstab, so i can only assume your mounting.
if you want a fast openbsd usb stick consider using MFS and options like
noatime,softdeps.
http://www.volkerroth.com/tecn-obsd-diskless.html
I found dd to be a very bad/misleading tool for this case.
Problems are caches in different layers of the system, filesystem
behaviour, sector sizing of drives and arrays, kernel configurations, input
data loading, real world scenarios and driver implementation.
I had same issues on centos.
Not per
I m not sure if you already investigated this but s.m.a.r.t. has quite many
diagnostic info. Even if the drive has not actually been marked as broken.
This is somewhat vendor dependent. I did not check these info with openbsd
but it should be possible.
Facts from my hard drives include:
Bad sectors
I thought about a recent device type (tablet/mobile) mixing with openbsd
for some time. My final thought was: openbsd will need some further dev
work in this direction, but this is what devs do. Problems -> small
Recent device type hardware has to be built and documented with some
direction toward
There is a post of my findings in the archives. Android 2.3 worked fine
with iked and npppd
qemu-kvm ...-smp sockets=2 ... solved it for me. What qemu version an build
are you using ?
Am 14.11.2013 18:47 schrieb "Leonardo Santagostini" :
>
> Thanks a lot to all, i will give it a try and gives tou you feedback as
> soon as it get implemented.
>
> Saludos.-
> Leonardo Santagostini
>
>
Great to see that support for newer cards is on its way.
Hi,
i'm currently looking for a openbsd compatible hw-raid solution. i ended up
with areca. openbsd lists a number of supported devices. sadly nothing that
can be found on the areca website. relevant openbsd supported products seem
to be eol.
the ARC-1224-8I ist quite intresting for my purpose, bu
Hi Alexey,
i asked myself same question.
As i read http://www.openbsd.org/armv7.html -> Planned Projects "Support
for USB on BeagleBoard and BeagleBone models."
Seems there isn't any usb-support yet. Netherless i bought a LevelOne
USB-0401 (axe AX88178) usb-ethernet card for upcoming support. I als
Hi christopher,
After i figured out the npppd config setup (seems there were some recent
syntax changes) it worked like charm.
I post my config files here as soon as i am at home
Jan
Hi,
i got Hands on an old Amilo Pro V2030. Hardware seems working. Celeron
1,4GHz, 40 gig HD, 1024 Ram. Tried to install 5.3 with built in disc drive.
Immediately hangs at boot with "entry Point ...".
I found some topics about ACPI but there is no BIOS Option for deactivating
this.
boot -c stops a
Hi Patrick,
My Gui problem is (was) quite similar. I was searching intensivly for a
correct,fast,non bloated desktop manager for years. I have checked at least
10 products ( non windows ) and in the end i felt depressed,like you.
So what saved my live ?
At work i had to build an environment for ja
Thanks Paul for this information. OpenBSD developers are fast as lightning.
Great !
Hi,
reading a news post
http://www.phoronix.com/scan.php?page=news_item&px=MTM3ODA
it turned out that there might be a number of security issues with xorg on
linux (really ? Lol ). I wonder how that affects the openbsd xorg. Can
anyone with more insight share his knowledge ?
Jan
Hi,
with virtio drivers and spice-protocol available in 5.3, i wonder if it is
possible to bring the qxl driver to openbsd. I assume this might be quite
difficult. Has someone already started (or given up) doing this ?
Jan
Hi adam,
I am heavily using virtualization in my daily work. I tried many different
virtualization technologies with openbsd. Openbsd client scenarios nearly
work well. As host nothing will work except qemu, that is slow.
So porting vb to openbsd ? This would be a rather difficult task. I dont
kno
I will defintly try the vnode and buffercache parameters for these are
totally new to me
Hi there,
to be prepared for storage desaster i am planning to upgrade my home
box.itis a intel atom d525 with 2gig mem. Im planning to build up a
small raid 10
with standard sata 5.25 inch drives. 1000 mbit lan. This storage will
mainly be used for samba shares, backups and nfs shares. Of course i
Hi andi,
You didnt mention your RAM size, disc speed etc so it's quite hard answer
your question.
As for a true database (RDBMS) system, with serious data, i would not use
openbsd.
You should check the homepage of your database software distributor and
look out for something like "supported os". I
Jitsi is another jingle capable messanger. Jre seems to the only dependency
to startup. It has some nice features like registrarless sip. Technology
seems quite up to date.
Gui is little bit slow.
Until now i did not manage to get jingle (video)working on openbsd. Could
not find out what would be n
Hi,
I often used the virtualbox way. Extension pack may not be needed. The way
is ( vbox faqs-vbox raw disk access-hd file pointing to usb stick- and
ready to go). I also used this setup for creating an openbsd mfs usb
livestick.works perfect
I also tried the socket trick in different setups but couldn't make it
work. I tried a smp 4,threads 1 cores 1 sockets 4. Sysctl tells cpus are
found but not used. Did you pass any special cpu information to qemu ?
Virtio: i'm not following current right now, but this are great news. Thank
you.
I'm Using KVM to virtualize OpenBSD 5.2 right now. I'm not that impressed
about Vmware. I used a esxi server for 2 years extensivly. Things i didnt
like : cli,closed software,bloated,technical documentation,gui.
Not that KVM is much better at this point,but at least, i have the sources.
problems i
Ohh i see. I totally missed the l2tp stuff. I thought android could do
plain ipsec or ipsec with l2tp.
I think things will flow now.
Thank you
Hi,
Running OpenBSD 5.2 AMD64 release as homeserver.
Got Andoid 2.3 Samsung Mobile.
Want to connect via vpn IPSEC.
Config:
ike passive esp tunnel from any to any \
main auth hmac-sha1 enc des \
quick auth hmac-sha1 enc des \
srcid dstid (testted different things here without effect) \
psk "test12
Thank you for sharing this information.
It's clear now
Am 11.12.2012 14:47 schrieb "Jérémie Courrèges-Anglas" :
>
> BTW, this issue has already been discussed before:
> http://marc.info/?l=openbsd-tech&m=134580856917208&w=2
>
> --
> Jérémie Courrèges-Anglas
> GPG Key fingerprint: 61DB D9A0 00A4 67
Hello,
i try to set up a openntpd server for a local network. because of security
i don't have a internet connection. goal is to setup openbsd 5.2 release as
openntpd server, sharing its local time (without sync of any pool servers
or something) to others.
/etc/ntpd.conf says:
---
listen
the
difference on my system is -vga. if i try to start it with -vga cirrus then
qemu segfaults during kernel load of linux. -vga std works fine.
Hope that this may help others.
2012/12/3 Brett
> On Mon, 3 Dec 2012 07:15:13 +0100
> Jan Lambertz wrote:
>
> > Hello,
> >
Hello,
I try to run a qemu linux guest ontop of my openbsd 5.1 i386. I've tried
nearly any possible qemu command. I've tested archlinux,debian,sled and
ubuntu. In every case,qemu core dumps when loading the linux kernel. When i
run an openbsd guest with same qemu configuration, everything works
fi
74 matches
Mail list logo